Hey Charlie, take it into windows w/133 ram divider and hit the 150 divider with the a64 tweaker! That should help some atleast.
Hey Charlie, take it into windows w/133 ram divider and hit the 150 divider with the a64 tweaker! That should help some atleast.
GA-P35-DS3L no more than 450fsb w/1333 chip
E6550 stuck at 3150
V-DATA 2x1gb
MSI 7900GS 512 3Dmark score in near future
Old A64 scores2001 39,707 3D03 23,768 3D05 11,394 3D06 5914
in good news: i found out i hadnt had the agp/pci lock on :/ it's only on at 67mhz agp apparently, and the bios i have was set to 66 default. so now i have 2650mhz superpi stable (pics later)
however, in bad news: this OCZ RAM is getting on my nerves. it wont even do 280fsb without errors in superpi , and it'll only do 275 (its rated speed) at 2T. i think i may replace it already... unless anyone has any tips to get it up to say 290 fsb or so? or to get it running at 1T... also the SATA hard drive now totally refuses to format... so i'll be replacing that too.
EDIT: i have some BH-5 that i'll try later. only 512MB though. by the way... is it safe to run the k8n neo2 and these chips with big vdimm? (like 3.6V or so) because i'd heard of the memory controllers on 64s dieing if you use too much vdimm....
here's bit better, a window open in my roomOriginally Posted by macci
9 x 312 = 2810 on AIR 16Cambient
Last edited by charlie; 10-31-2004 at 12:43 AM.
msi k8n neo2
90nm 3200+
GS TCCD512*2(vdimm=2.5v),FSB 272*10(1:1).
air cooler:CM HYPER 6
Last edited by peter lu; 10-31-2004 at 02:56 AM.
Peter, tips/tricks to get your ram that high? I have the same ram and board as your but I can only get it to 255 2.5-3-3-7.
Charlie,
Why not do 255*11 and run your memory at 1:1, couldn't that improve stability rather than using the divider? Is there something I'm missing? I'm somewhat new to this stuff.
Thanks,
gary
MSI K8N NEO2
90nm 3200+
GS TCCD
HYPER 6
Dang! Nice one
aww noodles looks like i got a bum core... i cant get 2800 to boot even, yet lots of people have it stable at 1.6V or there-abouts
Don't feel bad, I think there are a lot of lucky people here. My winnie 3200 will only run 2400 at 1.65 vcore on MSI neo2. I'm cooled with XP-90 + Tornado so I don't think that is the problem. htt at 240, 3x HT, 1:1 PQI TCCD 2.5-3-3-7. I can boot at 2600 but it take 1.8 vcore and its not bench stable...Originally Posted by shinymod
Kanati
I cant even get to 2.5 on my winnie with an Asus A8V 2.0 with ddr500 kingmax ram
Damn.. Hope that mine 3000+ winnie will be a good one... =/ Alot of different OCs here.
AMD Turion MT34 @ 250*9=2250MHz 24/7
ATI X800PRO
MSI K8NM FISR BIOS Rev 1.5 My first BIOS modification
2x80GB Maxtor drives @ RAID-0
1x160GB Seagate
Everything in a mATX case.
Maxxed with air (windows open boosted) 2748 and SuperPi 8M drived.
3500+
a little bit offtopic but should i pick the neo k8n platinum with nforce 3 or the one with k8t800pro? Platinum or FIR
AMD Turion MT34 @ 250*9=2250MHz 24/7
ATI X800PRO
MSI K8NM FISR BIOS Rev 1.5 My first BIOS modification
2x80GB Maxtor drives @ RAID-0
1x160GB Seagate
Everything in a mATX case.
Nforce 3=Platinum, thats the one. Got one on its way home with a 3200+Originally Posted by LorD_Kvadd
Corsair Obsidian 750D - MSI Z77 MPower - i5 3570k @ 5.0GHz - NZXT Kraken X60 - 2x8GB 1600MHz CL9 - 2x Asus GTX 660 DCU II SLI - 2x Intel 330 180GB SSD @ raid0 - Cooler Master Vanguard 700W
Isnt easier to let the one there started the thread add all result in the first post? It's such a waste of time to look throught all posts
Intel FTW!
Beanna
definately keeping a keen eye on this thread, think a winchester might be my next upgrade, bout time to.
nice clocks everyone, looking pretty safe to assume that 2.5ghz is a very realistic target
gone to central america with raleigh international, back in mid september.
happy oc'ing everybody
peter lu, what is the date on that 3200+?
Rauf : Thnx m8 herregud fler svenskar?
Looks like one 3000+ or 3200+ winnie and one Neo K8n Platinum gonna be ordered
AMD Turion MT34 @ 250*9=2250MHz 24/7
ATI X800PRO
MSI K8NM FISR BIOS Rev 1.5 My first BIOS modification
2x80GB Maxtor drives @ RAID-0
1x160GB Seagate
Everything in a mATX case.
IM looking a winchester to make use of my xtreme water cooling now is that higher multi on the 3500+ worth it? Paired with Mushkin Lvl2 v2?
ASROCK 970 Extreme 3 // FX-6200 @ 4.65 (245x? 64bit os) 1.45v,2200 nb/HT //8GB Mushkin DDR3 @833 8-8-8-24 cmd1 1.55v // HD7850// Silverstone 650w // ~32inch portal // WDgreen and blue // Kingston v300 120GB SSD // watercooled with Swiftech storm rev2, Fez 240 , 655 pump not packed into a Corsair Obsidian 650D ///
I'd say that the 3500 multi might be nice.
it's 0433SPMWOriginally Posted by trans am
Not enough info as to particualar steppings to look for yet? generally newer seems better no?
ASROCK 970 Extreme 3 // FX-6200 @ 4.65 (245x? 64bit os) 1.45v,2200 nb/HT //8GB Mushkin DDR3 @833 8-8-8-24 cmd1 1.55v // HD7850// Silverstone 650w // ~32inch portal // WDgreen and blue // Kingston v300 120GB SSD // watercooled with Swiftech storm rev2, Fez 240 , 655 pump not packed into a Corsair Obsidian 650D ///
Nicely done Peter!
Bookmarks