Page 47 of 47 FirstFirst ... 3744454647
Results 1,151 to 1,165 of 1165

Thread: Official Winchester OC Thread!

  1. #1151
    Xtreme Enthusiast
    Join Date
    Dec 2004
    Location
    Atlanta
    Posts
    813
    Quote Originally Posted by caRpetbomBer
    is the stepping of this cpu any good.
    i can get one pretty cheap. Or should i not waste my time.

    ADA3000DIK4B1
    CBBHD 0447RPMW
    Should be a good one as far as winchesters go. GL

  2. #1152
    Xtreme Member sinister1st's Avatar
    Join Date
    Dec 2004
    Location
    California
    Posts
    301
    Bringing back the good ol winnies? Too bad I lost most of my pics but back when I was using mine it would do right under 2.6 24 hr prime stable. Heres the only pic I have left on the 9 multi. (remebering at the time I was seeing how far my gskill could prime for 24 hrs )

    24 hr prime stable 2.5ish on air. 288x9 was max prime 24 hrs with a little more volts on my trusty neo2 wich Im still using with my X2 4400@2.7
    Attached Images Attached Images

  3. #1153
    Xtremeish
    Join Date
    Nov 2005
    Location
    Norway
    Posts
    1,190
    Hello XtremeSystems Forum, my first Post this is

    This is my max Mhz on my Winchester not stable on SuperPI.
    I tried to get it over 300HTT but that was no go.

    *Water with Window up*

    Cuplex Pro, Dual 120mm Rad, Eheim 1048.


    300*9=2700Mhz 1.6V+ (CBBFD 0437VPMW)
    166 3-3-3-8 2.85V
    http://www.kirkedam.mine.nu/kwk/Data...eh20300fsb.JPG

    RAM is set on crap mode just to get high HTT.

    http://www.kirkedam.mine.nu/kwk/Data...g/PICT1179.JPG

    Aprox Temps

    Around the computer=12c
    CPUtemp=10-15c
    Ramtemp=10-14c
    Outsidetemp=1,6C
    Watertemp=12c

    Not all temps are Accurat.
    Last edited by Kallenator; 11-01-2005 at 12:19 PM.
    Aber ja, naturlich Hans nass ist, er steht unter einem Wasserfall - James May
    Hardware: Gigabyte GA-Z87M-D3H, Intel i5 4670k @ 4GHz, Crucial DDR3 BallistiX, Asus GTX 770 DirectCU II, Corsair HX 650W, Samsung 830 256GB, Silverstone Precision -|- Cooling: Noctua NH-C12P SE14

  4. #1154
    Registered User
    Join Date
    Aug 2004
    Location
    .ee
    Posts
    83
    some Winchesters just wont do 2700mhz. you could try lowering voltage, as some Winchesters dont like voltage 1.6 and up.

  5. #1155
    Xtreme Cruncher
    Join Date
    Mar 2005
    Location
    Lancaster, PA
    Posts
    3,958
    I can get the winnie that I just bought from Mad Mikee up to 2.8ghz at 1.62v. I'm not sure of the stepping, because Mikee said he sent me an IHS from a different CPU. I haven't taken the time to try SPi 32m, but it's completely D2ol stable. Been running D2ol at this speed for 5 days straight.
    A wolf in wolves clothing.

  6. #1156
    Registered User
    Join Date
    Jun 2005
    Location
    Israel
    Posts
    21
    This stepping is good? what the maximum that I can arrive with it?
    CBBHD 0450wpaw
    winchester 3000+
    now i'm stable at 2520 315X8 1.5V
    and this is the best(stable) that i can do with my motherboard for now
    (GB K8NF-9, soon DFI lanparty ultra-d)

  7. #1157
    Xtreme Enthusiast
    Join Date
    Mar 2005
    Location
    North West London
    Posts
    775

    Winchester with unlocked multiplier


  8. #1158
    Registered User
    Join Date
    Feb 2006
    Location
    malaysia
    Posts
    59

    Cool

    er, are all the winnies still alive?

    ok, anyone with winnie able to run 2x1gb sticks beyond ddr520?
    i tried my 3000+ winnie on both neo2 plat n ep-9nda3+, my rams cant go beyond ddr520..

    this same ram on newer system i see [venice,opty, nf4 boards] able to do ddr560 easily..

    so i wanna know whats my limiting factor here..
    izzit my winnie, or the nforce3 boards

    -----------------------

    ok, juz checked my bios...
    probably winnie's mem controller cant handle 2gb at high htt

    @htt255


    @htt256


    heard same probs with another winnie user with pqi 2gb kits stuck at ddr480

    will try a venice to confirm this
    Last edited by e-jump; 02-10-2006 at 03:13 PM.
    | a64 3000+@6x250 1.0v winnie cbbgd 0440 rpdw | epox 9nda3+ rev1.0 |
    | team 2x1gb uccc ddr500 3-4-3-8 1T 2.60v | sapphire ati9000pro | enermax noisetaker 370w |


  9. #1159
    Xtreme Addict
    Join Date
    Aug 2005
    Posts
    1,060
    Yeeeej, got watercooling today, raised my prime stable overclock on my 3200+ winny from 2450mhz@1.5v to 2700mhz@1.63v !

  10. #1160
    Xtreme Addict
    Join Date
    Jul 2003
    Location
    Eastern USA
    Posts
    1,912
    DFI Lanparty Ultra-D
    3200+ @ 10x267.9 = 2.68GHz
    CBBID 0502APMW
    1.5V x 1.1% = 1.65V in BIOS
    air cooling: XP-90
    UTT @ 243.6 2-2-2-6 1T
    Vdimm @ 3.5V

    me :: thread
    Attached Images Attached Images
    Last edited by pik-ard v1.1; 05-16-2006 at 11:35 PM.

  11. #1161
    Registered User
    Join Date
    Mar 2004
    Location
    Coral Springs
    Posts
    47
    I have a 3200 winchester and was wondering something...

    I can run it either way, but one is prime stable and the other is not im wondering why cause to me it looks to be the same.

    240x10 =2400mhz, ram at 240..this does not prime more then about 10mins.

    253x9.5 =2403, ram at 240.. this does prime *Ram is set to 1:1, but uses divider cause of .5 multi*

    Now, am i crazy...why does my ram do 240 when its on a divider and not when its 1:1?

    Explain to me why one works and the other doesnt. I mean the to me, the ram in both are running 240, and the cpu is 2400.
    Last edited by HighLife; 06-28-2006 at 01:15 PM.
    Intel E4500 @ 3.2Ghz (320x10)
    Abit IP35-E - TT Big Typhoon/100CFM fan
    2x 1024 OCZ PC6400 DDR2
    BFG 8800GT 512mb @ 695/1740/975
    2x WD 120GB SATA - 1x WD 16MB 250GB SATA 3G
    Xfi Xtreme Music- Klipsch 2.1 - Sennheiser HD580/Grado SR225 - Darkvoice 336i - Sony SCD-CE595
    CoolerMaster Praetorian / BFG 650w PSU
    Samsung 2232BW 22" Widescreen LCD
    Portable Audio - Zen Vision:M 30GB + Shure E4 + Go-Vibe v3 (AD8620)

  12. #1162
    I am Xtreme
    Join Date
    Apr 2005
    Location
    Wilson,NC and Charlotte, NC
    Posts
    907
    3500+ winchester
    MSI K8N neo2 platinum
    OCZ bh5 pc3200 sticks
    Thermalright XP-90 w/92mm tornado (yes, its noisy. i don't run it at full blast)
    OCZ 520W psu
    thermaltake armor (black) case

    running memory at 3.4v 2.5 2 2 8 @ 250 x 9.5 = 2375
    cpu is at 1.49v

    going to try for more here soon, this is just what i started playing with.

  13. #1163
    Quote Originally Posted by ZL1Killa
    3500+ winchester
    MSI K8N neo2 platinum
    OCZ bh5 pc3200 sticks
    Thermalright XP-90 w/92mm tornado (yes, its noisy. i don't run it at full blast)
    OCZ 520W psu
    thermaltake armor (black) case

    running memory at 3.4v 2.5 2 2 8 @ 250 x 9.5 = 2375
    cpu is at 1.49v

    going to try for more here soon, this is just what i started playing with.
    that is my same setup

    gj

  14. #1164
    Banned
    Join Date
    Nov 2006
    Location
    BEYOND THE SUN - SCOTLAND
    Posts
    476

    Talking

    This was the most I could pull from my 3500+ Winny under water

    Loose memory at the time.......28second 1M Pi was my fastest with this cpu.
    Attached Images Attached Images

  15. #1165
    Xtreme Member
    Join Date
    Sep 2006
    Posts
    243
    My poor Winnie 0502GPFW wouldnt go above 2.4Ghz no matter what I did

    even on Ultra -d with any voltage (tried up to 1.62, didnt wanna go further)
    E6400 L628 @3.4 1.4V
    Ultra 120 Extreme
    2GB team Xtreem @ DDR2-850 4 4 3 10
    Abit Quad GT
    X1800XT flashed to XTPE 700/1600
    OCZ GameXstream 600W

Page 47 of 47 FirstFirst ... 3744454647

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •