OCZ EB Overclocking

[notoriousformula]

I was wondering what other people are running their EB sticks at? Specially on AMD 64 boards..

so far i have been able to hit 250 @ 2.90V

here is a screenie:



thanks

[Tony]

3V to 3.1V got me 260+ with many modules...I maxed out my own modules with 3V but they all need good cooling.

I suggest you cool em well and you should do well.

[arj]

I can do 250Mhz 3-2-2-11 on my K8N NEO2 with my 2X512MB 3700EB with 2.9v. Currently running it at 2.5-2-2-10 with 2.9v.

[jayl]

My 1x512MB 3700 EB does and/or I am now running it 3-2-2-10@250MHz@3.1V and it is prime stable....
(settings are 3-2-10-2-11-15-a-2-2-2-a-a-a-0-2-6-5-a-e-8-4-a)

or then 285MHz@3-3-2-8@3.2V

max clocks using 3.5V are 292MHz.... but not stable...

[Mrki]

2x256 OCZ EB 3500 ... not bad!

[perkam]

Why is 2.5 so much of a barrier or common stable OC for AMDs...

I mean, now 2.6 is all of a suden - whoa, you got a 2.6, Celebrate

[Mongoose420]

257 3-3-2-8 with 2.8vdimm on my epos 9nda3+. 247 3-2-2-10 with same 2.8vdimm. superpi/3dmark stable. 250 would prolly run but i need a better fan blowing over my sticks, plus there right on top of eachother in this board. also thats 2x512 in DC.

[saaya]

check this out





290 3-2-2... def one of the better 3700eb sticks
3.5v
1.85v vcore
modded mach1
dfi lanparty

almost 3ghz... and 290 3-2-2... damn damn damn

[Mongoose420]

lol, what did he do make a waterjacket for it? lol thats nuts.

[perkam]

290 3-2-2... def one of the better 3700eb sticks

At 3Ghz, thats what Im talking about...though I wished you could do 2.7 on that without having to use your modded Mach 1

[saaya]

At 3Ghz, thats what Im talking about...though I wished you could do 2.7 on that without having to use your modded Mach 1

you mean 2.7ghz on air? some of the 90nm chips seem to hit that speed

[Mongoose420]

my 130nm chip will do 2.7 on air

[perkam]

my 130nm chip will do 2.7 on air

Than you must have one of the rarest 3500+s on the market. I'll believe it when I'll see it Mongoose420

[Grayson Carlyle]

2x256 OCZ EB 3500 ... not bad!

NOT BAD??? It's really hard to get stable 250 with 2 sticks on a 754. I'll be putting my system together next week, and I can only pray I'll hit 250 w/ 2 sticks. I'll be happy with 230 @ 3-2-2-10 1T

[Mongoose420]

Than you must have one of the rarest 3500+s on the market. I'll believe it when I'll see it Mongoose420

yea, best one ive seen in fact. I didnt say 100% stable@2.7 but stable enough for superpi 1m/pifast/3dmark01. 3dmark01@246x11 1:1 in sig with all the details. there's pifast at 2695mhz, that close enough?

[Mrki]

NOT BAD??? It's really hard to get stable 250 with 2 sticks on a 754. I'll be putting my system together next week, and I can only pray I'll hit 250 w/ 2 sticks. I'll be happy with 230 @ 3-2-2-10 1T

Hehe ...

Yes goods Results and Prime stable ... I post the screen today!

Timings are ... 2.5-2-2-6-10-12 @ 3.1VDimm

[RootX]

@3.2V, Abit AI7. 255 prime stable,

[moep]

That's where mine top out as well - I'm able to run 268 stable @ 3.2V, 3.0-2-2 on the Abit AS8 (865PE).

[Naughtyboy]

I´m currently running my 3200EB in my backup rigg...until I get my new stuff.

This is a crapy Max3 with a 350w PSU...with very low rails...so voltage is al over the place.... using vdimm above 3v is a no go...vtt is absolute crap and above 3.0 everything gets worse. My 2.6 800fsb starts to crap out at 250fsb....can´t get any stability at any voltage above 250fsb...anyhing over 260 is an absolute no go with air. And I´m running latest Omegadrivers(Quality) with gaming settings on my FX5950....so plzz don´t mind the 3dmk...it´s just for proving level of stability.


With my new system(939 ) I´m absolute sure I can squezze out alot more from thoose wonderful chips.



Highest 3dmk01 stable with 2,5-5-2-2 and 3.0v... 2x512mb DC




Still sandra stable




Highest I could get in to windows...but without any stability what so ever...because of the cpu.

[WesM63]

You know mine notor, about 257mhz is max on mine. I was able to hit 260mhz for a few mins before it chrased at 2.9vdimm. Just a tad bit more vdimm is all I need.

[notoriousformula]

very nice guys ..keep them coming!

[YoupY]

I'm very happy with mine too. The best I could currently do with my EB's is 292 @ 3.0-2-2-5-10-16-1T with only 3.2V, After that my proc is holding me back. On my ty Epox board the 9 multi doesn't work very well, I reach better cpu / HTT / mem speeds with 10 x.

Link to old pic: http://members.home.nl/youpy/a64prom11.jpg

[notoriousformula]

I'm very happy with mine too. The best I could currently do with my EB's is 292 @ 3.0-2-2-5-10-16-1T with only 3.2V, After that my proc is holding me back. On my ty Epox board the 9 multi doesn't work very well, I reach better cpu / HTT / mem speeds with 10 x.

Link to old pic: http://members.home.nl/youpy/a64prom11.jpg

That is insane O/Cing .. what kinda cooling you are using? temps? could you please post some superpi(1mb) and sandra benches?

thanks!

[Epsilon]

check this out


[IMG=400]http://members.home.nl/epsilon/temp/pifast_10x293_3700EB.jpg[/IMG]


290 3-2-2... def one of the better 3700eb sticks
3.5v
1.85v vcore
modded mach1
dfi lanparty

almost 3ghz... and 290 3-2-2... damn damn damn

At 3.5v, thats pretty much the trick

lol, what did he do make a waterjacket for it? lol thats nuts.

Just plain air

Btw this stick does 295 on those timings. This CPU does 2689on water so 9x290 is a nice speed for lanparty's and stuff .

[YoupY]

That is insane O/Cing .. what kinda cooling you are using? temps? could you please post some superpi(1mb) and sandra benches?

thanks!

Mem isn't cooled at all. I ripped of the spreaders and gained a lot of mhz. This mem tends to run very hot and the spreaders keep all the warmth on the mem. But running @ 292 also makes the mem pretty hot. With a good board and some cooling on the mem I probally can reach the 300 sync.

I hope at least