3.4C@3.7Ghz or 3.2E?

[$0m#0n#]

What so u think is gonna be better under Zalman 7000AlCu? The 3.4C is not going higher now, when its gonna be colder it ll go on max 3.74Ghz .

[saaya]

what??? are you sure? what are your temps? whats the highest vcore you tried? are you sure the memory and mobo are ok?

[$0m#0n#]

I tried 3 different memory no from them made more than 217Mhz in 1:1 realy stable, like after a few hours of memtest errors , but even with dividors nothing when I go above 217Mhz it usualy reboots after a few hours of Prime or whatever, it's stable but than it just restarts , my +12V line is like 12.40-12.50 idle & 12.00-12.10 under load, I dont think it's the mobo it's just >220 FSB. I ve got 32-34C IDLE & not more than 50C under load.

[saaya]

hmmm is that with the cou fan at full speed?
what mainboard?

[$0m#0n#]

y. the fan is @2700-2800rpm . The mobo is P4P800 DLX

[$0m#0n#]

Do u think it can be my PSU coze it's just Chieftec 360W with +12V 17A & tweaked +12V rail from 11.46V=>12.10V@load?

[$0m#0n#]

So it looks like it was the PSU after writing the post it turned off & it took the mobo also , my mobo is back from rma & the PSU still not, I think I ll try Fortron 350W.