Arnt people with the Giga Byte NF boards haveing the same type problems with Winnies ? Seems like I read in some thread that they were.Originally Posted by GravediggA
Arnt people with the Giga Byte NF boards haveing the same type problems with Winnies ? Seems like I read in some thread that they were.Originally Posted by GravediggA
1.36beta, worked great
look at pifast link
What are the max VCores for the new BIOSes (1.41mod, 1.5x, 1.51)?!
I am kinda "stuck" @ 1.55V +10% (1.700V) with my 1.41 Bios.
Cant you make it 1.55 + 18%?Originally Posted by pk0r
Intel FTW!
Beanna
max Vcore for every bios, except 1.36, is 1.7V, if i remember right.Originally Posted by pk0r
Only the 1.36 bios has a working 1.55V+18% (=1,829V)
you can find the changelogs for the biosses here
Last edited by Jack; 12-19-2004 at 04:02 AM.
Quick question what's MSI's official warranty stance of boards returned/rma'd with black plate glue having been pryed off ???
---
Actually, the back plate is "double sided sticky taped" on... so when you pull off the backplate, keep it in a safe place and put it back on there if you have to return/rma. shouldn't be an issue at all... the tape comes off with the back plate and is reusable...Originally Posted by eva2000
I put mine in a small poly bag and let the bag stick to it, otherwise it'll get stuck to some paper or something
AMD Athlon 64 X2 4200+ (@ stock)
Arctic Cooling Freezer 64 Pro
MSI K8N Neo2 Platinum (BIOS 1.D)
2x512MB OCZ PC3200 Platinum Rev 2 (2-2-2-5)
Sapphire ATI X1950 Pro 512MB (@ stock)
Antec NeoPower 480W
Have to replace thermal interface on this board for sure
Shaotai
Welcome to the sickness.
i5 750 4.20GHz @ NH-D14 | 8GB | P7P55DLE | 8800U | Indilinx SSD + Samsung F3 | HAF922 + CM750W
Past: Q6600 @ 3.60 E6400 @ 3.60 | E6300 @ 3.40 | O165 @ 2.90 | X2 4400+ @ 2.80 | X2 3800+ @ 2.70 | VE 3200+ @ 2.80 | WI 3200+ @ 2.75 | WI 3000+ no IHS @ 2.72 | TBB 1700+ @ 2.60 | XP-M 2500+ @ 2.63 | NC 2800+ @ 2.40 | AB 1.60GHz @ 2.60Originally Posted by CompGeek
There's a chipset voltage? :?Originally Posted by IvanAndreevich
viccyran
No, there isn't. I was being stupid in the middle of the night.
I think I was trying to say whether you've tried a VDD mod on it or not.
i5 750 4.20GHz @ NH-D14 | 8GB | P7P55DLE | 8800U | Indilinx SSD + Samsung F3 | HAF922 + CM750W
Past: Q6600 @ 3.60 E6400 @ 3.60 | E6300 @ 3.40 | O165 @ 2.90 | X2 4400+ @ 2.80 | X2 3800+ @ 2.70 | VE 3200+ @ 2.80 | WI 3200+ @ 2.75 | WI 3000+ no IHS @ 2.72 | TBB 1700+ @ 2.60 | XP-M 2500+ @ 2.63 | NC 2800+ @ 2.40 | AB 1.60GHz @ 2.60Originally Posted by CompGeek
i seen what mosfets that should have heatsinks on them but where can i buy some that will fit.
odb
Any BGA ramsinks for videocards should fit
i5 750 4.20GHz @ NH-D14 | 8GB | P7P55DLE | 8800U | Indilinx SSD + Samsung F3 | HAF922 + CM750W
Past: Q6600 @ 3.60 E6400 @ 3.60 | E6300 @ 3.40 | O165 @ 2.90 | X2 4400+ @ 2.80 | X2 3800+ @ 2.70 | VE 3200+ @ 2.80 | WI 3200+ @ 2.75 | WI 3000+ no IHS @ 2.72 | TBB 1700+ @ 2.60 | XP-M 2500+ @ 2.63 | NC 2800+ @ 2.40 | AB 1.60GHz @ 2.60Originally Posted by CompGeek
Am i the only one that cant get agp cards to work with this board :O ?
Other than that it works pretty good accually
Murmlos
You got a fup'ed board. RMA/replace it
i5 750 4.20GHz @ NH-D14 | 8GB | P7P55DLE | 8800U | Indilinx SSD + Samsung F3 | HAF922 + CM750W
Past: Q6600 @ 3.60 E6400 @ 3.60 | E6300 @ 3.40 | O165 @ 2.90 | X2 4400+ @ 2.80 | X2 3800+ @ 2.70 | VE 3200+ @ 2.80 | WI 3200+ @ 2.75 | WI 3000+ no IHS @ 2.72 | TBB 1700+ @ 2.60 | XP-M 2500+ @ 2.63 | NC 2800+ @ 2.40 | AB 1.60GHz @ 2.60Originally Posted by CompGeek
wanted to update, I've been keeping my FX at stock for now, I've been using the 1.51 bios and I beleive its most likely my cpu maxing out but I'd like to know if anyone else is using an fx53 here, also here is my cpu spec:
Main Rig:
2 x Dell 2001FP 20.1" TFT Monitor
AMD X2 4400+ @ 2.6Ghz
DFI LANPARTY UT NF4 SLI-D
2 X 1GB Mushkin Redline XP4000 [3-3-2-8 @ 2.7v]
BFG 7800 GT OC
WD Raptor 74Gb - SATA
Maxtor 120Gb - SATA
Maxtor 250Gb - IDE
Creative Sound Blaster Audigy2 ZS
Logitech G5 Wired Mouse
Logitech Z-5500 5.1 Speakers
PC POWER & COOLING TURBO-COOL 510 DELUXE
Water Kit: DD A64 TDX 1/2", Thermochill 120.3, Hydor L35
ZTCDESIGN.COM - Web Design/Hosting/Game Servers
uniacid,
it looks like more people have a similar cpu
http://xtremesystems.org/forums/showthread.php?t=46810
What is the BEST bios for achieving HIGH HTT? 300x3 is not stable.
i5 750 4.20GHz @ NH-D14 | 8GB | P7P55DLE | 8800U | Indilinx SSD + Samsung F3 | HAF922 + CM750W
Past: Q6600 @ 3.60 E6400 @ 3.60 | E6300 @ 3.40 | O165 @ 2.90 | X2 4400+ @ 2.80 | X2 3800+ @ 2.70 | VE 3200+ @ 2.80 | WI 3200+ @ 2.75 | WI 3000+ no IHS @ 2.72 | TBB 1700+ @ 2.60 | XP-M 2500+ @ 2.63 | NC 2800+ @ 2.40 | AB 1.60GHz @ 2.60Originally Posted by CompGeek
Hmm, 1000 is standard, why is it not stable? Try the 1.3b6!
PC : Asrock Z68 Extreme3 Gen3 + Intel Core i5 i2500k + 2 x Asus HD6870 DirectCU + 2x2GB PC12800 G.Skill Eco 7-8-7-24 + Creative X-Fi Titanium PCIe + Scythe Mugen 3.
Digicam : Pentax *istDL2 + Pentax smc DA 18-55mm F3.5-5.6 AL + Cosina F3.5/100mm Makro.
Heimkino : Samsung LE-46B450 FullHD + Arion AF-4000HDCI + Onkyo TX-SR505E + Quadral Quintas 5.0 + Heco Victa 25A.
I just received and tested my 0412, superb!!
Finally no more memory errors @ 260 with my BH-5 :thumbsup:
Now if I can bench 10x280...
sigh if only I could go above 2.6 :/
Main Rig:
2 x Dell 2001FP 20.1" TFT Monitor
AMD X2 4400+ @ 2.6Ghz
DFI LANPARTY UT NF4 SLI-D
2 X 1GB Mushkin Redline XP4000 [3-3-2-8 @ 2.7v]
BFG 7800 GT OC
WD Raptor 74Gb - SATA
Maxtor 120Gb - SATA
Maxtor 250Gb - IDE
Creative Sound Blaster Audigy2 ZS
Logitech G5 Wired Mouse
Logitech Z-5500 5.1 Speakers
PC POWER & COOLING TURBO-COOL 510 DELUXE
Water Kit: DD A64 TDX 1/2", Thermochill 120.3, Hydor L35
ZTCDESIGN.COM - Web Design/Hosting/Game Servers
2 out of 3 boards of mine are FUBARed,
1st board had 2 smd resistors fall off from near the cpu.
That happened while changing CPU's. I did not put any pressure on those smd resistors. They were so badly soldered on that as soon as they were touched by accident, they fell off.
2nd board has 3 faulty dimm slots.
Using a 3200+ 0441, I tested using only 1 dimm & only slot 1 works. As soon as I place the same dimm in any of the other slots, my rig beeps its head off. .
Funny thing is I had memtest running 20 hours+ @ 250MHz 1:1 (slots 1&2) & booster in slot4 & it ran fine. WTF??
Thinking it was a 90nm problem, I put in my 3500+ NewCastle & straight away got those damn beeps...
MSI have a good board if it's been through their Quality Testing Procedure . The only good board I have is the one I'm typing this on...
Still wondering why dual channel runs memtest fine but single channel beeps it's head off. Also, although dual channel ran fine, as soon as winxp loads up; it's only a matter of minutes before I get the infamous BSOD or my rig just freezes on me...
Oh well, looks like MSI are gonna be getting 2 of their "Platinum" Editions back .
Minh
Cheers,
Minh
Mine:3770k @ 4.6Ghz @1.25v, Corsair H80, Asus SabreTooth Z77, 4 x 4GB Corsair Vengeance 1600C8, XFX 7870DD, Corsair HX850w, Sandisk 240GB Extreme SSD, Corsair Graphite 600T
Kids: 2500k @ 4.6Ghz @1.368v, TRUE120, 2 x 4Gb Corsair Vengeance 1600C9, Gigabyte Z68X-UD4-B3, Gigabyte HD6870, Sandisk 240GB Extreme SSD, 850w Thermaltake 850w PSU, Antec P182 Case
Kids2: i3 3225, 2 x 4Gb Kingston HyperX 1600C9, ASUS P8Z68-M PRO, Sapphire HD4870 1GB, 128GB Samsung 830 SSD
Server: Core2Quad 9450, 2 x 2Gb Kingston HyperX 1066, 2 x 2Gb Corsair XMS1066, Gigabyte EP45-DS5, Corsair HX650w, OCZ 120GB Vertex 2E SSD, WD 1TB Black, 2TB Seagate 5900rpm, 2TB Seagate 7200rpm
GravediggA
I was running 1.36b when I said it's not stable. I am trying 1.37mod now.
i5 750 4.20GHz @ NH-D14 | 8GB | P7P55DLE | 8800U | Indilinx SSD + Samsung F3 | HAF922 + CM750W
Past: Q6600 @ 3.60 E6400 @ 3.60 | E6300 @ 3.40 | O165 @ 2.90 | X2 4400+ @ 2.80 | X2 3800+ @ 2.70 | VE 3200+ @ 2.80 | WI 3200+ @ 2.75 | WI 3000+ no IHS @ 2.72 | TBB 1700+ @ 2.60 | XP-M 2500+ @ 2.63 | NC 2800+ @ 2.40 | AB 1.60GHz @ 2.60Originally Posted by CompGeek
How can u tell if your motherboard is having a problem with the powersupply? the reason i say this is because i think mine does. It detects certain things on the motherboard everytime i reboot, and if i change around the power connectors to the hardware it will detect new items...
also has anyone had problems with this power supply?
X-Connect 500W and the neo i plan to get this if it is indeed my psu.
Bookmarks