aah your right...But what the hell. better to have too much than too little right?
Got it somewhat stable.. But I don't think it'll be stable in 270 DC.. Never... but I'm sure as hell going to try!
aah your right...But what the hell. better to have too much than too little right?
Got it somewhat stable.. But I don't think it'll be stable in 270 DC.. Never... but I'm sure as hell going to try!
AMD Turion MT34 @ 250*9=2250MHz 24/7
ATI X800PRO
MSI K8NM FISR BIOS Rev 1.5 My first BIOS modification
2x80GB Maxtor drives @ RAID-0
1x160GB Seagate
Everything in a mATX case.
I can't get anywhere above FSB221 on my Rev. 2.0 mobo, stable that is, and it's not my Mushkin. I tried 2.5-3-3-6... didn't help. So now I see that I should disable APIC. Should I just reboot, disable APIC in BIOS, format my Windows partition, and then I should get more stable FSB?
ABit IP35 Pro BIOS 14
Q6600 G0
2*1GB Super Talent PC6400
Inno3D 8800GTX
Corsair HX620
I just read somewhere in this topic that the 10.5 multiplier provides better memory bandwitch. Here's my results from Sandra:
11x: 3397/3173
10.5x: 3411/3169
10x: 3384/3146
9.5x 3394/3137
ABit IP35 Pro BIOS 14
Q6600 G0
2*1GB Super Talent PC6400
Inno3D 8800GTX
Corsair HX620
hey TicTac, can you answer this for me,
in what situation would I need CPC to be ON or OFF? I do not know which version of the d10 i want
CPC On forOriginally Posted by Stang_Man
1 x 128MB
1 x 256MB
2 x 256MB
1 x 512MB
CPC Off for
2 x 512MB
3 x 512MB
2 x 512MB + 1 x 256MB
3 x 256MB
You need a CPC ON D10
Yes ... you should read the changelog carefully... i already inform that multiplier 10.5 ... got bandwith spikes in it... 1% higher than any other multiOriginally Posted by Alaza
you need D26 Manta Rays XT CPC OFF biosOriginally Posted by Alaza
Vdimm = 2.9V in bios
Vdd = 1.7V in bios
Vagp = 1.6V in bios
PCI latency = 128clck
Ext P2p discard time = 1ms
that should do the job done....
APIC disable it this way.... update processor driver in Device manager menu to Advanced ACPI driver
reboot... go to bios menu ......then Disable the apic...
lol... nice job there
PCI latency = 128clck
Ext P2p discard time = 1ms
what do these settings change/help exactly?
just want to make sure before i go messing with it
AMD XP-M 2400+ 35w @ 2552MHz 11x232 @ 1.9v on ABIT NF7 V2.0 - D26 Manta Ray XT by Tictac
2x 512mb DC - Corsair BH6 @ 2-2-2-11 232FSB @ 3.3v
Radeon 9500 Softmodded to 9700 @ 395/300
Enermax EG465P-VE PSU
Thermalright SI-97 HSF
This bios kicks ass. I have gone from 231 to 240 stable 2-2-2 timings with only 2.95 volts. Bravo!
I did. I just wanted to share my experience so people had an idea of how muth band width it actually gained.Originally Posted by tictac
PCI latency = 128clck
Ext P2p discard time = 1ms
Those two are BIOS settings, right? Never touched them before.
I already use D26 Manta Rays XT CPC OFF, but I was actually recommended to try Merlins BIOS because of the low FSB. And what is it about the D10 BIOS? Why are you modding that one, when it's so old?
I'm already at these:
Vdimm = 2.9V in bios
Vdd = 1.7V in bios
Vagp = 1.6V in bios
Just not the V-AGP. Isn't it at 1.55v standard?
ABit IP35 Pro BIOS 14
Q6600 G0
2*1GB Super Talent PC6400
Inno3D 8800GTX
Corsair HX620
How about for 1 x 512MB + 1 x 256MB?CPC On for
1 x 128MB
1 x 256MB
2 x 256MB
1 x 512MB
CPC Off for
2 x 512MB
3 x 512MB
2 x 512MB + 1 x 256MB
3 x 256MB
[q]PCI latency = 128clck
Ext P2p discard time = 1ms[/q]
I'm also curious as to what these do.
Last edited by Jeff7; 10-17-2004 at 10:58 AM.
that will make your PCI deviceOriginally Posted by di_entropy
such as HDD,SoundStorm, ethernet,firewire
run alot smoother at high fsb
i'm using that setting
233MHz stable.... Mtec50D chip
But should we only use it, if we have problems with Soundstorm etc. when clocking, or should we change it anyway?Originally Posted by tictac
ABit IP35 Pro BIOS 14
Q6600 G0
2*1GB Super Talent PC6400
Inno3D 8800GTX
Corsair HX620
If you have trouble with soundstorm and pci devices check the southbrige. Mostly it's a cooling problem.Originally Posted by Alaza
AMD Turion MT34 @ 250*9=2250MHz 24/7
ATI X800PRO
MSI K8NM FISR BIOS Rev 1.5 My first BIOS modification
2x80GB Maxtor drives @ RAID-0
1x160GB Seagate
Everything in a mATX case.
tictac you should write some sort of manuals/tips for NF2 users
ASUS P5K-E // E8400 Q746A519
G.Skill F2-8000CL5D-4GBPQ
LC 550W GP// XPERTVISION 9600GT
since i got different ram now, i needed cpc off..Originally Posted by tictac
check this, not bad for the volts
thanks tictac!
Originally Posted by tictac
i did this mod along with the vmod with the pencil and i got my fsb from 220 to 240 stable
System Specs:
Antec Preformance II
Amd 2500+ mobile iqyha 0408rpmw
Abit nf7-s rev2.0 Merlin bios
2x 256 OCZ DDR-400 Premier 2.5-3-3-7
Asus Geforce Ti4200 8x (360/573) w/ thermaltake orb mod
SoundBlaster 5.1 live
1x 30G Maxtor
1X 120G Western Digital
400watt Antec True Power
Cooling Specs
Thermalright SP-97
Thermaltake Orb-Vid card
1x 120mm Sonon Front
2x 80mm Sonon Front
2x 80mm Antec Back
Temps: Case/28 Cpu/39
And the pencil mod raises the VDD?Originally Posted by Status:72
ABit IP35 Pro BIOS 14
Q6600 G0
2*1GB Super Talent PC6400
Inno3D 8800GTX
Corsair HX620
Yes, it does but IMHO i prefer the use of a VR for this so simple mod.
Silverstone Sugo SG01B
Biostar TForce 6100-939 (Bios A12)
Opteron 148 (CAB2E BPMW)
Saphire X800 GTO2 @ X850 XT
Gskill 4800 FF (1 of only 50 in the World)
Geil One TCCD (Max: Testing)
Geil Ultra-X PC3200 (Max: 287 2.5-4-4-8 2T @2.75v)
Enermax Liberty 500W
TFT HP 2035 20"
If you mod Vdd make sureOriginally Posted by Alaza
between 1.75V - 1.85V
234MHz here :banana4:
http://69.93.183.37/802/26/upload/p673920.gif
nice what is that program that u are using to test stability?
im still using prime95 but wondering if there is something better
AMD XP-M 2400+ 35w @ 2552MHz 11x232 @ 1.9v on ABIT NF7 V2.0 - D26 Manta Ray XT by Tictac
2x 512mb DC - Corsair BH6 @ 2-2-2-11 232FSB @ 3.3v
Radeon 9500 Softmodded to 9700 @ 395/300
Enermax EG465P-VE PSU
Thermalright SI-97 HSF
Hi,Originally Posted by LorD_Kvadd
Nice FSB! can you provide me some info like Vdimm, Vdd, BIOS, OS used? any tricks you wanna share? I got mine at 262FSB with 3.4V but I couldn't go any further (BH-5 DC)
nForce2 Ultra
Winbond BH-5
260MHz FSB 2-2-2-7
Vdimm 3.7V
Vtt 1.72V
Vdd: 2.2V
Originally Posted by KODE
3.4v!! bios maxes at 2.9 for me did you do a hardmod apposed to a softmod to get that voltage?
System Specs:
Antec Preformance II
Amd 2500+ mobile iqyha 0408rpmw
Abit nf7-s rev2.0 Merlin bios
2x 256 OCZ DDR-400 Premier 2.5-3-3-7
Asus Geforce Ti4200 8x (360/573) w/ thermaltake orb mod
SoundBlaster 5.1 live
1x 30G Maxtor
1X 120G Western Digital
400watt Antec True Power
Cooling Specs
Thermalright SP-97
Thermaltake Orb-Vid card
1x 120mm Sonon Front
2x 80mm Sonon Front
2x 80mm Antec Back
Temps: Case/28 Cpu/39
yep I did the VDimm mod, 2.9 in BIOS outputs 3.4V or higher if I want to, It´s just a hardware mod.Originally Posted by Status:72
nForce2 Ultra
Winbond BH-5
260MHz FSB 2-2-2-7
Vdimm 3.7V
Vtt 1.72V
Vdd: 2.2V
Bookmarks