Question for All AMD+DDR users

[Entuscan]

Wel we all know DDR clocks higher on Intel riggs but I would like to know how fast u guys get your FSB going.

Plz Only post Fast cpu decode;MAX timings (and I mean every value of cas ras etc to the lowest as possible) AND verry important 1T command !!!
As that's all I'm interested in, heck the fast timings are the only thing that matters for amd.

Oh yeah it has to be a "stable" FSB to, I mean completing a run of SuperPi 1M or higher and a 3Dmark run.

So for example im running a FSB @202mhz CAS2 2-5-2 2 1T on my KX7-R.

Why am I interested in your results?
Well I sadly have to Upgrade to 512mb memory, so I'm in need of a good stick.
But I'm guessing I have a verry good stick already. And it will be damm hard to find a new, equally good or even better memory module.

Thanks for helping out

Entuscan

[LBJGH]

my corsair xms will only do 170mhz cas 2, 1T but as high as 205mhz on the fast settings.

[Bob21]

This is with XMS3200@2.85v and the KX7 with the Rubycon caps. I am sure it would have gotten higer with more voltage to the mem

[Marci]

Can't really comment due to a debate going on as to what the KD7's "normal" is... as it doesn't feature an "ultra" option the opinion is going round that the KD7's NORMAL might be the same settings as the KX7's FAST, and the KD7's FAST being the KX7's ultra... this would also explain why my cpu won't clock as high as it would on previous boards when set to NORMAL decode.

If suspicions are confirmed, and KD7 normal is fast equiv, then 205 is highest I can go at max 2-2-6-2-1T rates... 3v to mem

[Shuki]

200 with samsung pc2700 CTL at 2.5 2-6-2-1

[Chong345]

Corsair XMS3000 at 2.9V does 195 on my KX-7 with the timings you described. I can run 3d in loops like this. Any higher and I get no posts.

Chong

[Jeff]

My stick of Corsair XMS PC3000C2 will do 214MHz on my 8K3A+(2719 bios) with 3.1v and maximum settings which produces around a 3200 score on Sandra memory test.

This stick will also do 213MHz@3.2v on my 8K3A with the 2912 bios and maximum timings which results in just under 3300 on Sandra.

I'm supposed to be getting a stick of Corsair XMS PC3500C2 tonight or tomorrow and I'm hoping this will allow me to go into the 220's at max. timings.

[X Men SS]

256MB TwinMos PC3200 with Winbond BH-5 chips @

187MHz :: Fast, 2, 4way, 2-6-2-2, Enhanced, 1T
2.85V

Maybe it's not the max (stable) speed of the RAM but I have locked CPU, soo ...

[N8]

Bob21,

Welcome to Xtreme

[Henry]

211Mhz, cl2, 2-5-2, fast, enhance, 4way, 2T, Kingston PC3200 (Winbond BH-5 chip), 3.2v (modded KX7-333), unlocked XP1600+


With 1T timing it maxed out at 202mhz :

[TodB]

Originally posted by X Men SS

Maybe it's not the max (stable) speed of the RAM but I have locked CPU, soo ...

You go girl ( just joking )

Try for 200FSB

[Trevor]

I run this setup 24/7 it passes golmemv5.07/memtestv3.0

[Godfather]

Ive never messed with cas ras timings and what not when overclocking i set my thing at SPD i have my processor running at 10*185= 1850 with my ddr mhz at 370mhz also set on turbo mode. Was wondering do I jsut set all the timings to 2 or something?