I've posted this on my local forum here in Hellas since 1-8-2004 (or 8-1-2004).......
I've started this as a poll to our local forum IF they wanted me to manufacture it or not........The votes (over 94%) were YES..........
I was on vacations and I came yesterday so........as ppl asked , I started to design it's cirquit.........
It will be called "DDR Maximizer diagnostic tool"
Here's the link of it.........You have to translate it somehow........
L I N K .......
It will have THREE Led Displays for MORE accurate Voltage reading......ex. 3.47Volts ..... Those led displays will be ON TOP of the PCB and not on it's side , so as the reading of the volts will be easier(don't have to put our heads into the computer's box to read it)......
Trimmer of 25 turns so as the Voltage trimming will be MORE accurate and "softer".......
PLUS.......It will have a FRONT PANEL for "anytime trimming"......Not to have our computer's box always open......
This front panel is been designed for diskette bay and later on for a 5.25 bay........
Here's how the front panel of the DDR Maximizer looks........
Front panel will be optional.......
As you can see there are three led displays , two dip switches(12 and 4) and a trimmer of 25 turns........
The dip swiches(tiny switches on-off) are for the voltage as the trimmer is........When ALL of the dip switches are OFF then the voltage will start from 2.80Volts( I don't think that is nessesary for lower voltage starting).........When the first dip switch is ON , the voltage will be 2.85Volts......When we put AND the second dip switch to ON , then the voltage will be 2.90Volts......When we put AND the third dip switch to ON , then the voltage will be 2.95Volts and so on......The voltage WITH the dip switches will go up to 3.60Volts(for more "secure" reasons) and with the trimmer will be up to 4Volts for more "dangerous" overclocking.......
This is the front panel of the DDR Maximizer.........How it looks???......I also would like some input of you guys of WHAT you would like to have on it for better and easier use........Thanks a lot.......
Bookmarks