Great, now i have a good reason to upgrade to amd64, now that the prices dropped on the 3200+ im gonna get this mobo and the 3200+ newcastle- weee
Great, now i have a good reason to upgrade to amd64, now that the prices dropped on the 3200+ im gonna get this mobo and the 3200+ newcastle- weee
WHAT BOARD?Originally posted by OPPAINTER
I'll run some tomorrow, right now I hooked up a 939 mobo.
Just got a new FX-53 I'm testing.
OPP
WHAT RAM?
WHAT VOLTAGE??
oh my god ... show us moreOriginally posted by OPPAINTER
I'll run some tomorrow, right now I hooked up a 939 mobo.
Just got a new FX-53 I'm testing.
OPP
P4 3.0 sl6wu | Abit IC7 Max3 |2*512 Ocz 3700EB | Antec truecontrol 550
2*120 Maxtor Sata Raid0 | Ati radeon 9200 | Custom W/C
That BIOS is gonna put me out of a jobOriginally posted by bigtoe
Bios pics
<snip pics>
So now you know what to expect, there may be more tweaks in the next bios which i haven't recieved yet..i will update.
Tras of 0 is really 5 clocks
X800Pro class 3DMark01 : 36670
X800Pro class 3DMark03 : 16092
Ti4200 class 3Dmark01 No 1 : 22213
Super Pi 1M : S754 28 sec, FX53 25 sec
HEXUS Pifast : S754/Prom 40.55sec, FX53 36.92sec
Author of A64 Tweaker
Co-author of NF2 Tweaker
Well I thought that but 5 showed some instability, so maybe there are other tweaks along the way. I fully expect most of the options this bios has will disapear on the shipping bios though.
Its nice to show for giggles though..LOL
Got a problem with your OCZ product....?
Have a look over here
Tony AKA BigToe
Tuning PC's for speed...Run whats fast, not what you think is fast
I think its great that the BIOS writers started making ALL the options available to the users. They'll probably have to limit the ranges to those officially supported (and documented) by AMD though.Originally posted by bigtoe
Well I thought that but 5 showed some instability, so maybe there are other tweaks along the way. I fully expect most of the options this bios has will disapear on the shipping bios though.
Its nice to show for giggles though..LOL
Does the BIOS has all the CAS Latency values avaiable? If so could you do me a small favour and dump the DRAM controller registers using WPCREDIT (bus 0, device 24, function 2) with CAS Lat set to 1.5 clocks. I have two possible decoding schemes for the reserved CAS values ... just need to double check.
I am also curious about the drive strength setting. AMD docs show only two possible values:
0 - Normal (default)
1 - weak (beware) <--- exact words out the AMD doco
Ive tried "weak" and it was very very bad, so I left it out of A64 Tweaker. Maybe there are some more controls in the reserved fields
X800Pro class 3DMark01 : 36670
X800Pro class 3DMark03 : 16092
Ti4200 class 3Dmark01 No 1 : 22213
Super Pi 1M : S754 28 sec, FX53 25 sec
HEXUS Pifast : S754/Prom 40.55sec, FX53 36.92sec
Author of A64 Tweaker
Co-author of NF2 Tweaker
Cas 1.5
2
2.5
3
all work it seems
all others crash the system.
I will try and have a look at the registers for you.
Got a problem with your OCZ product....?
Have a look over here
Tony AKA BigToe
Tuning PC's for speed...Run whats fast, not what you think is fast
I may have missed it but.....
What Happens when you stick a mobile A64 chip in?
This question is for all of us who want a DFI and a 35w A64 3200 mobile WITHOUT having to buy a desktop chip to boot with first!?!?!?
Good results in answer to this question will open the floodgates even further
wow i want this without even trying my kv8 pro yet
ABiT is crying right nowOriginally posted by reject
wow i want this without even trying my kv8 pro yet
I bet it would work flawlessly (thats why Oskar gives Vid control as an optionOriginally posted by mad mikee
What Happens when you stick a mobile A64 chip in?
This question is for all of us who want a DFI and a 35w A64 3200 mobile WITHOUT having to buy a desktop chip to boot with first!?!?!?
Good results in answer to this question will open the floodgates even further
That board is crazy, DFI will win again...
Dahl @ Techsweden.org
what about VCore-drops and fluctuations.....the DFI nF2 Infinity is ja very good board as well, but in that thing its the last crap on earth.....i love my board and i hate it at the same time....
----- AMD K6-2 300 "Chomper" xxxxx xxxx xxxx /// 300 MHz @ 2,200 V -----
----- AMD Athlon XP 1700+ "Thouroghbred B" JIUHB 0306 MPMW /// 2400 MHz @ 1,900 V -----
----- AMD Athlon XP-M 2500+ "Barton" AQXEA 0327 UPMW /// 2450 MHz @ 1,850 V -----
----- AMD Athlon XP-M 2600+ "Barton" IQYHA 0401 XPMW /// 2500 MHz @ 1,750 V -----
----- AMD Athlon 64 3000+ "Newcastle CG" xxxxx 0418 WPMW /// 2600 MHz @ 1,600 V -----
----- AMD Athlon 64 3200+ "Winchester D0" xxxxx 0433 SPMW /// 2750 MHz @ 1,616 V -----
----- AMD Phenom II X2 555 BE "Callisto" xxxxx xxxx xxxx /// 4080MHz @ 1,375 V -----
----- AMD Ryzen "Zen" xxxxx xxxx xxxx /// TBA @ TBA -----
Due to the fact that they have upped the max vcore to 2.1v, where the most seen before on other boards is 1.7-1.85v, I think they paid special attention to the NF2s vcore problem, and fixed it on this board accordingly
But that's only a guess
Last edited by LilGator; 07-29-2004 at 08:33 AM.
I don't get a v-core drop. The voltage actually goes up around .05 under load.Originally posted by p4z1f1st
what about VCore-drops and fluctuations.....the DFI nF2 Infinity is ja very good board as well, but in that thing its the last crap on earth.....i love my board and i hate it at the same time....
OPP
Any idea how much longer we have to wait for the retail version release? :drool: Also, will it support Mobiles right off the bat?
aahh, very goodOriginally posted by OPPAINTER
I don't get a v-core drop. The voltage actually goes up around .05 under load.
OPP
----- AMD K6-2 300 "Chomper" xxxxx xxxx xxxx /// 300 MHz @ 2,200 V -----
----- AMD Athlon XP 1700+ "Thouroghbred B" JIUHB 0306 MPMW /// 2400 MHz @ 1,900 V -----
----- AMD Athlon XP-M 2500+ "Barton" AQXEA 0327 UPMW /// 2450 MHz @ 1,850 V -----
----- AMD Athlon XP-M 2600+ "Barton" IQYHA 0401 XPMW /// 2500 MHz @ 1,750 V -----
----- AMD Athlon 64 3000+ "Newcastle CG" xxxxx 0418 WPMW /// 2600 MHz @ 1,600 V -----
----- AMD Athlon 64 3200+ "Winchester D0" xxxxx 0433 SPMW /// 2750 MHz @ 1,616 V -----
----- AMD Phenom II X2 555 BE "Callisto" xxxxx xxxx xxxx /// 4080MHz @ 1,375 V -----
----- AMD Ryzen "Zen" xxxxx xxxx xxxx /// TBA @ TBA -----
Well...400HTT anyone
Last edited by Tony; 06-20-2008 at 01:46 PM.
Got a problem with your OCZ product....?
Have a look over here
Tony AKA BigToe
Tuning PC's for speed...Run whats fast, not what you think is fast
wowoww, what are you runnin your ram at?
Well the max i could get was 425HTT at the 4 multi which doesn't seem all wacko on this board.The ram is running 140 mode so ddr600 or so but this is not a good divider for memory bandwidth.
Just a HTT screenie for jollies.
Last edited by Tony; 06-20-2008 at 01:46 PM.
Got a problem with your OCZ product....?
Have a look over here
Tony AKA BigToe
Tuning PC's for speed...Run whats fast, not what you think is fast
jesus....
thats insane.
I can't wait for DFI to finally release this board.
"The command and conquer model," said the EA CEO, "doesn't work. If you think you're going to buy a developer and put your name on the label... you're making a profound mistake."
whats the world record for HTT speed? is it higher than that?
Got a problem with your OCZ product....?
Have a look over here
Tony AKA BigToe
Tuning PC's for speed...Run whats fast, not what you think is fast
Man, I think yours is the recordOriginally posted by bigtoe
whats the world record for HTT speed? is it higher than that?
All I could find was this 400 shot.
http://www.xtremesystems.org/forums/...010#post332010
OPP
this is one SICK, NASTY motherboard! DFI isALL!!
C
Posting Permissions
Reply With Quote
Originally Posted by bh2k
Bookmarks