I just looked everywhere and i cant find the open GL properties.
Here is a screenshot of the properties option.
With 9800 pro i had options for both.
Whats going on here?
I just looked everywhere and i cant find the open GL properties.
Here is a screenshot of the properties option.
With 9800 pro i had options for both.
Whats going on here?
Well that phucken sucks then. Now im stuck with 60hz on my monitor while playing doom3. It Sucks playing with only 60hz in doom 3 cuz the whole picture tears when moving side to side. I had the same problem with 9800 pro but upping the hz to 85 made it so much better. Now wtf am i suppose to do.Originally posted by m0nk33y
i don't think new drivesr have opengl settings anymore
Another thing. How come my Gainward 6800gt doesnt allow me to manual oc my video card? It did come with its own software tweaker which runs at 400/1100 default but i still want to be in control. Look, this is what i mean: it wont let me "accept" to agree to written terms. Sad. The tweaker that came with the gt only goes up to 420 on core and 1200 on memory.....
You have to scroll dow nthe window and it should then enable the accept/deny options.
can't you use refreshforce or nvhardpage to fix the refresh rate ? You can also fiddlel with the opengl settings if you use nvhardpage... guru3d.com have it..
Gigabyte P55 UD5 | i5 750 @ 4.00GHZ | HD5850 | Corsair 650w
You need to use a utility such as refreshfroce, or refreshlock to allow for higher refresh rates than 60hz in games.
Refreshforce:
http://www.pagehosting.co.uk/rf/
Refreshlock:
http://www.pagehosting.co.uk/rl/
I prefer Refreshforce, but it created problems when attempting to run Counter-Strike: Source beta, so now I'm using Refreshlock without any problems.
Scrool down to the
"Refresh Rate Overide Tab"
In the drivers
have u tried coolbit 2.... cause in that there are opengl options....
Nforce3 K8nnxp Athlon64 3200+ @2.6GHZ 10x260 2-2-2-11 no mods) @ 8x290 2.5-3-3-6(no mods)
Nforce2 A7N8X Barton 2500+ @2.4GHz 10x240 2-2-2-3
Tbreadb 2400+ @2.5GHz 12.5x202 cas 2-2-2-3
Pentium IT7Max2 2.26 @3.1GHz (air)
1.6a @ 2.58GHz (air),samsung pc2700 @230fsb CAS 2.5 (3.0v)
MSI KT266pro2RU 1600+ @2000+
FIC KT133 TB 1GHz
XFX 6800GT @ 430/1200
2X 36GB WD Raptor 10,000rpm
1x 120GB seagate 7200.7
Hercules Rad9800pro @ 411/378
19'' Sony G420 1280x1024 @ 100hz
corsair 256mb pc3500 3.23V
Leadtek ti4400 315/661
LianLi pc-75
COOLING: Prometia cooled
Yeah that sets the refresh rates. Also scroll down the bottom of that EULA...Originally posted by Blue078
Scrool down to the
"Refresh Rate Overide Tab"
In the drivers
System
ASUS Z170-Pro
Skylake i7-6700K @ 4600 Mhz
MSI GTX 1070 Armor OC
32 GB G.Skill Ripjaws V
Samsung 850 EVO (2)
EVGA SuperNOVA 650 G2
Corsair Hydro H90
NZXT S340
You can set doom3's refresh rate with the cvar r_displayrefresh. Add something like "r_displayrefresh 100" to autoexec.cfg in doom3's base directory.
what he said ^^Originally posted by -=TriX=-
You have to scroll dow nthe window and it should then enable the accept/deny options.
rivatuner gives you access to all opengl tabs...not that u need them...I would not use coolbits2 if I were u
Bookmarks