Its Alpha...But we have a PR and final units ready to ship real soon.
let me know what you think it does
Its Alpha...But we have a PR and final units ready to ship real soon.
let me know what you think it does
Got a problem with your OCZ product....?
Have a look over here
Tony AKA BigToe
Tuning PC's for speed...Run whats fast, not what you think is fast
- Increases Vdimm, or...
- Tests RAM
Close?
What would you hope it did?
Got a problem with your OCZ product....?
Have a look over here
Tony AKA BigToe
Tuning PC's for speed...Run whats fast, not what you think is fast
I hope it would do one fo this:
- Increase Vdimm
- Find maximum NB overclock
- Test for RAM errors
- All
Edit: I've been stearing at the picture for like 20 minutes, nevermind if i post crap.
BTW, BT, if you want, you can PM me telling me what it is. That way, you let everybody else guess.
Last edited by enroscado; 06-12-2004 at 01:42 PM.
I think that it measures the Vdimm(the Volts are shown by the 2D dislpay) and propably increase it from the pot on the upper right corner.
It doesn't test ram...sorry on that one.
It will help make vdimm mods a thing of the past though
Got a problem with your OCZ product....?
Have a look over here
Tony AKA BigToe
Tuning PC's for speed...Run whats fast, not what you think is fast
It's ok, i'm not good at guessing.Originally posted by bigtoe
It doesn't test ram...sorry on that one.
Neat.Originally posted by bigtoe
It will help make vdimm mods a thing of the past though
But...isn't that encouraging OCZ customers to void their warranties?
Well yes and know..it works with other ram brands also..LOL
Got a problem with your OCZ product....?
Have a look over here
Tony AKA BigToe
Tuning PC's for speed...Run whats fast, not what you think is fast
Yes, I remember this product being talked about before. Looks promising, however people were worried it might slow the performance down clock to clock. What results have the tests yielded?
Fastest A64 3400+ in the world running at a nice 3359.59mhz:
http://valid.x86-secret.com/show_oc?id=18225
Originally posted by bigtoe
Well yes and know..it works with other ram brands also..LOL
* Big and might take up 1-2 ram slots
* Performance ?
* Expensive ?
Other than that, might be promising...
Well i told you it was Alpha..the final is a little different to this, and should only take 1 slot.
The other unit we saw a few weeks back is not a patch on this...this unit will power 2 dimms and is NOT fed off a fan header which would blow in a matter of secs at extreme clocks.
Got a problem with your OCZ product....?
Have a look over here
Tony AKA BigToe
Tuning PC's for speed...Run whats fast, not what you think is fast
Looks to me like it displays the (ram?) voltage. Guess it also supplies voltage as well?
If my answers frighten you, stop asking such scary questions...
- Hush V2
- Intel i7 4770K - XSPC Raystorm - Gigabyte G1.Sniper Z87 - Crucial Ballistix DDR3-1866 - 9-9-9-24
- Zoltac Geforce GTX 780Ti - EK-FC780GTX Ti
- SanDisk Ultra 480GB SSD - WD Black 1TB 64MB Cache
- Custom Water Cooled Fractal Designs Define R4 - Antec HCP-1000 Platinum
- EK Coolstream XTC 280 - Cougar CF-V14HB Vortex HDB - XSPC EX240 - Scythe GT AP-15
- Dazmode Storm DDC 3.25 - AquaComputer Aqualis DDC 150 Reservoir
Well BH5 loves it m8... but you need to keep it cool . Also you may have a board with no vdimm controll at all..this will give it to youOriginally posted by Jrocket
Yes, I remember this product being talked about before. Looks promising, however people were worried it might slow the performance down clock to clock. What results have the tests yielded?
Got a problem with your OCZ product....?
Have a look over here
Tony AKA BigToe
Tuning PC's for speed...Run whats fast, not what you think is fast
I'm convinced Where can I get one
If my answers frighten you, stop asking such scary questions...
- Hush V2
- Intel i7 4770K - XSPC Raystorm - Gigabyte G1.Sniper Z87 - Crucial Ballistix DDR3-1866 - 9-9-9-24
- Zoltac Geforce GTX 780Ti - EK-FC780GTX Ti
- SanDisk Ultra 480GB SSD - WD Black 1TB 64MB Cache
- Custom Water Cooled Fractal Designs Define R4 - Antec HCP-1000 Platinum
- EK Coolstream XTC 280 - Cougar CF-V14HB Vortex HDB - XSPC EX240 - Scythe GT AP-15
- Dazmode Storm DDC 3.25 - AquaComputer Aqualis DDC 150 Reservoir
Just tell us
Um, he has done that already.Originally posted by Cucumber
Just tell us
Well i can post some more info.
The unit is fully Patent applied for and has been for quite a while.
It features vdimm control from 2.5 to 4.2v although we "may" limit the max a little lower.It reads applied voltage on the readout so you see 2.6 2.7 etc.It has full voltage filtering on the dimm so should actually allow the ram to clock higher.
Most boards have a resistor divider network for VTT so this usually tracks ok with this unit, however the IC7 as we know doesn't so you would need a VTT mod on this board. We have had VERY good results with the voltage modules and they have allowed us to max every IC we have thrown at them on most every board.
Got a problem with your OCZ product....?
Have a look over here
Tony AKA BigToe
Tuning PC's for speed...Run whats fast, not what you think is fast
So how does it work? You plug it into one of the RAM slots, and then it changes the voltage to all?....Or you plug the RAM into the device ??
Either way, looks wicked ...and if the RAM plugs into it, would it not also help the issue with onboard A64 mem controllers
more importantly post some ram oc'ing results with it
---
up to 4v pleassssssse :p
*drool *
Overclocking made in Austria
I agree with eminem... please!
Fastest A64 3400+ in the world running at a nice 3359.59mhz:
http://valid.x86-secret.com/show_oc?id=18225
Well Eva trust you to show up looking for benches..LOL
Its 4.2V max at the mo but things may change..we will see.
Results for me were i was able to hit 262fsb EB@2.5-2-2-5 on the P4C800E where i got 3-2-2-5 at 256 with 2.85V..so i maxed my dimms here.
I had OVER ddr600 with 4400beta at 3.4V and my BH5 gained 6fsb over their last max on unmodded boards.
I must stress my unit is Alpha and has no filtering on board so the new units will be a little better..i can and will mod my unit to full shipping specs so there will be more results soon.
The unit does take one dimm slot..the ram plugs in the board as normal as if it didn't trace lengths would be a mile out and no voltage would help the dimm clock.
The shipping units will be available for A64 boards also with the pot vertical etc so you should still be able to run 2 dimms.
Got a problem with your OCZ product....?
Have a look over here
Tony AKA BigToe
Tuning PC's for speed...Run whats fast, not what you think is fast
Another pic for you guys...as you see its fed off the ATX line.Final product will be neater of course...
Got a problem with your OCZ product....?
Have a look over here
Tony AKA BigToe
Tuning PC's for speed...Run whats fast, not what you think is fast
So basically it plugs into an available dimm slot and overvolts to whatever u want for the remaining dimm slots?
PII X6 1055T 14x272
Gigabyte 890GX
2x4 GB Gskill DDR3@4890
XFX 7870
Bookmarks