My x800XL with a gutted Arctic Silencer 5, extended duct, and a panaflo U1A 80mm fan attached.
My x800XL with a gutted Arctic Silencer 5, extended duct, and a panaflo U1A 80mm fan attached.
"If the representatives of the people betray their constituents, there is then no resource left but in the exertion of that original right of self-defense which is paramount to all positive forms of government"
-- Alexander Hamilton
Originally Posted by Andrew LB
My x800XL with a gutted Arctic Silencer 5, extended duct, and a panaflo U1A 80mm fan attached.
[mg]http://www.kalionzes.com/panacooler/panacooler2.jpg[/img]
That's so cool
The design of that cooler is supposed to have a fan INSIDE the plastic housing. Sitting on top like that will actually make it less efficient and probably make your card hotter. The air flow isn't supposed to be flowing down, but actually flows off the side of the fan.My x800XL with a gutted Arctic Silencer 5, extended duct, and a panaflo U1A 80mm fan attached.
Last edited by tytlyf; 06-13-2005 at 10:46 AM.
DFI LP UT NF4 Ultra-D 623-3
Opty 170 @ 2.8 z9500
G.Skill 1GBFX @ DDR560
eVga 6800GS @ 485/1.15
2xRaptor74 R0 sata
OCZ 700w GXSSLI
Antec SuperLanboy Case
dats one heck of a fan mounting on the silencer..wats the temp between stock n the modded panaflo on?
Do aircooled TEC's belong here too?
Anyway:
MOBO: Asus P5A
CPU: P200 @ Still working on it (Mobo won't post above 110FSB).
MEM: 128MB Mushkin PC150 Rev.3
Vid: Ti4200 with PEP66 and 60x38 Delta Screamer.
Cooling: PEP66 + 1cm Coldplate + 72W TEC + 80CFM Delta + Homegrown shroud.
DFI nF3 Ultra-D - 3000+ Venice @ 300x9 - 2x512MB OCZ Value - Asus 6800 @ 16x1,6 - 80GB Hitachi 7K80 - PVR 150MCE - Tagan TG480-U22 2Force
Abit ST6 - Tualeron 1.2 @ 1.6 or 1.0A @ 1693 (168FSB) - 2x 256MB MDT PC150 - Sparkle 235W - 80GB Maxtor - V8420S @ 335/705+ - 2K1 = 11485 - 2K3 = 1610
Asus P5A - K6-III 400 - 128MB Mushkin PC150 Rev.3+ - Asus V3800 Ultra Deluxe or Asus V7100 - 2x 12MB Voodoo II - 40GB Hitachi - Q-Tec 550W
I'm NOT watching pr0n, I'm studying anatomy
I never knew TEC's can be air cooled, i thought air is not enough.
Intel E6300 1.86ghz @ 3.6ghz w/ Zalman CNPS 9500
Gigabyte IP35 DS3
Crucial Ballistix Tracer 4gb
XFX 256mb 7600GS
Seasonic S12
1.5tb hdd space
ok i did some research and found that air cooled tec's are not really that good. What kind of temps are you getting?
Intel E6300 1.86ghz @ 3.6ghz w/ Zalman CNPS 9500
Gigabyte IP35 DS3
Crucial Ballistix Tracer 4gb
XFX 256mb 7600GS
Seasonic S12
1.5tb hdd space
Added some fans around hot areas, ie the RAM and the chipset.
That's right, it doesn't work as well as a watercooled TEC but it does work better than any real aircooling.
With my Celeron 1.2 @ 1.6 full load temps are about 2-3C above ambient, idle temps are less than 10C.
I promised to cool a P4 3.8GHz with aircooled TECs to ambient temps, but since I'm building an AMD rig that won't happen anymore.
Now I'm gonna (try to?) cool a (probably) 3200+ Venice below ambient @ full load using aircooled TECs.
DFI nF3 Ultra-D - 3000+ Venice @ 300x9 - 2x512MB OCZ Value - Asus 6800 @ 16x1,6 - 80GB Hitachi 7K80 - PVR 150MCE - Tagan TG480-U22 2Force
Abit ST6 - Tualeron 1.2 @ 1.6 or 1.0A @ 1693 (168FSB) - 2x 256MB MDT PC150 - Sparkle 235W - 80GB Maxtor - V8420S @ 335/705+ - 2K1 = 11485 - 2K3 = 1610
Asus P5A - K6-III 400 - 128MB Mushkin PC150 Rev.3+ - Asus V3800 Ultra Deluxe or Asus V7100 - 2x 12MB Voodoo II - 40GB Hitachi - Q-Tec 550W
I'm NOT watching pr0n, I'm studying anatomy
The whiney little 50mm~ fan on my Leadtek 6800GT was getting annoying so i stripped the card down to the bare heatsink and made a custom Plexi shroud/duct that i can attach an 80mm fan to. Much quieter + same cooling performance, OR louder and much better cooling performance - depending on which fan is used
Opteron 170 @ 3.0Ghz on air, Opteron 144 @ 3.1Ghz on air
busta`:........ WOW, best wire organization in the world.
TMM : nice mod man, i love it, looks well thought through
Intel E6300 1.86ghz @ 3.6ghz w/ Zalman CNPS 9500
Gigabyte IP35 DS3
Crucial Ballistix Tracer 4gb
XFX 256mb 7600GS
Seasonic S12
1.5tb hdd space
![Send a message via ICQ to =[PULSAR]=](images/misc/im_icq.gif)
![Send a message via Skype™ to =[PULSAR]=](images/misc/im_skype.gif)
TMM thats a nice and neat setup you made, I love the ingenuity of the fan shroud, but I have to ask why not a 120mm fan or atleast a 92mm
This is my modded Arctic Cooling Freezer 64. Stock fan is dead.
Asus P5B Deluxe | Intel Core 2 Duo E6400 | 2x1Gb Geil Ultra 800
7800GT @ 550/1300 | Iiyama ProLite E481S
Audigy 2 @ 4 stuff | Altec Lansing MX 5021
Laing DDC-1T | Cooltek Maxistream + 3x120mm @ 5v | PowerX | Abadon Pro | Cube DFI Pro
w00t, Card-board is for the best of modders.
Sunon 120's, 84cfm at 12v and 34dba. My computer is so silent as of lately, My case yields many more loud fans.Hell, well THAT is ghetto
Which fans are that btw?
ahhhhhhhh thats is fantastic, takes me back to the days between cases, cardboard all the way!!!
love it
ghettowned......
the front intake fan is held on by duct tape btw
3 pics on end are my "upmarket ghetto" mem + mosfet cooling idea
It works....
Nothing special but effective...PWMIC 42 and nF4 chipset 40 under prime95 blend.
How are you supplying it with 24-26v??? I need to know, my PC is so nearly a Hovercraft... Add a little remote control, and It'll fly round the front room
I need piccies
Mine.....
dats very colourful..n alot of fans
my eyes hurt from al thsoe color and that bright HL2 wallpaper :P
Orange hurts your eyes??..and a white wallpaper too?......¬¬
Reply With Quote
Bookmarks