Air Cooled Gallery

[patrock84]

Custom black coated mainboard-heatsink:

[Jsunn]

[demonkevy666]

small rig was made for my mother.
Mini telstar
this is my mother computer
heat sink thremaltake V1 phenom 9550.
OCZ platinum ram 1066mhz 1gb x2.
two crossfire 3470's
old gateway monitor.
apevia telstar midtower green.
550 watt rocketfish power supply
3 78CFM Thermaltake thunderblade fan's
80gb SATA 1.5 gb
1 DVD burner drive.
Os windows XP.

[dpokrajac0]

Custom black coated mainboard-heatsink:

Nice pics

[IKIKUINTHENUTZ]

Custom black coated mainboard-heatsink:

As in manufacture did it for you upon request, or you took off the heatsink and anodized it?

[Andrea deluxe]

[patrock84]

.. or you took off the heatsink and anodized it?

That's right!


1526 gram copper beauty:

[IKIKUINTHENUTZ]

That heatsink looks nice but will you be putting up a comparison to the copper TRUE? Just wondering.

I need a actual size image but the heatpipes looks like 8mm away from where the base contacts the cpu. That's a bit too tad far away for the heatpipes don't you think?

[patrock84]

I wouldn't get a testsample of a TR True Copper and I wouldn't buy it. The Cooler I shown is about two years old and a prototype. I don't think, that Nanoxia will drop it to the market. Your right, the heatpipes are about 7-8mm away from where the base contacts the cpu, it's a tribute to the possibility to mount the cooler in 360 degrees. Look at the S775 mounting holes.

The Black AL-Edition:

[drnip]

CLICKY CLICKY CLICKY

[IKIKUINTHENUTZ]

@ patrock84: too bad the North bridge cooler is blocking the most ideal positioning.

@ drnip: soo much green standing out, reminds me of some souped up car (ie: ricerocket)

[Slyr7.62]

drnip, nice rig.

[patrock84]

@ patrock84: too bad the North bridge cooler is blocking the most ideal positioning.

Nope, the Northbridge-Cooler doesn't blocking anything, but in die position, i got the best cpu-temps, two 120mm on the top pull the warmed air out of the case!

[Demo]

Wont the anodize reduce heat dissipation ?

[IKIKUINTHENUTZ]

Wont the anodize reduce heat dissipation ?

If I'm not mistaken it's like nickel plating on heatsinks. The effect is so small it's nearly negligible. Unfortunate I don't have any links or charts to prove this claim rather than anodized heatsinks and nicked black TRUE with same performance numbers as regular TRUE that are already sold in markets.

[Demo]

I see, that explanation is good enough for me.

[Tommy_Hewitt]

[pcaddict]

Thermalright hoe

[croto5000]

those heatsinks are absolutely beautiful though

[nikon331]

[DeathTyrant]

Nice rig Nikon! I too have the Asus WS Revolution and an Enermax Revolution PSU.

[illidan]

pictures or didn't happen

[Jsunn]

those heatsinks are absolutely beautiful though

A agree except for the MOSFET heatsinks, those are just ugly! IMHO.

[elite.ire]

Lian Li Tyr X500

i said to myslef as i was reading that u wanted a case that the x500 would be perfect for you

[//GobliN//]

I couldnt find my nikkor 18-55 lens, Hence I had to shoot photos with 70-300 telephoto zoom lens. In a small room as I have it was the most difficult thing I had ever done in my room.
Stuff done: inside paintjob done.
Fan grills and sub grill painted uv yellow.
backplate was cut for cable managament. (I know still it is not enough but stacker needs lots of time)
cables sleeved.






Thinking of getting rid of those stupid green led fans.

ACRYAN will do their job perfect and in a sexy way
And will get nice red uv cathod.

And I'm still working on cutting the sidepanel. After mounting plexy my job will be completed. who am I fooling pc jobs never end

here is my stacker not too fancy not so great. just cables managed and painted.

all criticisms,advices are accepted and welcomed. thank you.