The other cooling forums have their own galleries. Why doesn't the air cooling forum have one ? I say we start it upAir cooling doesn't mean you can't be extreme
The other cooling forums have their own galleries. Why doesn't the air cooling forum have one ? I say we start it up
post em up fellas
How do you upload imagse thru the forums? If not whos a good host i can use?
*sigh* my mom took her digi cam with her today, ill get pics up tommorrow
Last edited by SuperDude; 06-12-2004 at 12:34 PM.
when you make a post, theres an attach file button down there below the smiley box.. click browse and select the pic, must be gif, jpg, png, txt, zip, bmp, jpeg, or doc no bigger then 204800 bytes
i try it but i am failledOriginally Posted by All Kill3r
when you make a post, theres an attach file button down there below the smiley box.. click browse and select the pic, must be gif, jpg, png, txt, zip, bmp, jpeg, or doc no bigger then 204800 bytes
GOOD GOOD STUDY DAY DAY UP
ugg shoes
replica jersey
Vast spirit,active thought and industrious heart make a genius.
hrmm, says i may not post attatchments.....
It works for me.
Thats a 120x38MM 1amp fan. Its not even too loud. The HS is a heavily modded VGA silencer.
For those of you about to post:
craig what did you do to the VGA?
http://smbach.com/mad.gif
Opty 175 Rig
Lian-Li PC75B case, Thermaltake BT w/ 165 CFM delta fan, Enermax 550watt PSU (36A on 12+), x1950 Pro, DFI Lanparty NForce 4 Ultra-d (moded for SLI so that i can use the second slot at 8x), Opteron 175 CCBWE 0547 TMPW (2.80, 280x10, 1.5 volts), 2x1gb Mushkin Redline xp4000 (280 3-3-2-8, 2.65 volts), 80GB WD
AM3 Rig
Lian-Li PC-75b case, Asus Crosshair III Formula, 965 x4 C3 @ 4.1 1.525 volts 2.8 NB 1.25 volts, 2x2gb Dominator GT Cas 8 2000Mhz@ 1720 6-6-5-18-22 1.725 volts, Asus 5770 VT @1010/1435, Seasonic 850watt PSU 2x12v rails 40 amps each, 36GB raptor boot drive, 80GB WD storage drive, HeatKiller LT cpu block, BI GTX 360 with 6x Scythe 3000RPM fans in push/pull, MCP 655 variable pump on setting 5, EK 150ml res, all 1/2 inch
DFI NF4 BIOS Guide
Does this Radeon 9800 Pro air cooling mod qualify for the Xtreme Air Cooling label?
Last edited by comment; 06-14-2004 at 07:28 AM.
- DFI LANParty LT X38-T2R Rev. AA1
- Core 2 Duo E8500 @ 4009MHz, 1.31V
- TRUE @ 2x Scythe S-Flex SFF21F, 5V
- 4 x 2GB G.Skill Pi PC2-8800
- MSI R4870X2-T2D2G-OC
- 3x 74GB Raptor ICH9R Raid0 @ 128KB Stripe Size
- Plextor PX-716SA/T3KB DVD-RW
- Auzen X-Fi Prelude @ TI OPA637AU - Thule - Dali/Ultimate Ears - Argento
- SilverStone OP700
- CM Stacker 830 Evo
- Eizo FlexScan HD2441W - Audioquest DV-X
- WinVista Ultimate 64bit SP1
im speechless ...
msi k8n neo2 plat
3200+ winchester (10x262)
bfg 6800gt
pdp pc3200 xbl
thermalright xp-90 w/7v tornado 92mm
http://www.mainboard.dk/upload/files/DSCF0025.JPG
Darn comment... Looks insane... I only need to Vmodd mine... Thkin of gettin Revoltec Heastsinks for my gfx ram...
Just need to clench my butt cheeks and get it over with...
P4 3.0C 800@3.64 242FSB 1.625Vcore on Ic7 max3(Watercooled)
Corsair 2x512@DDR484Mhz PC4000( 3-4-4-8 )2.8V
X800XT@586/594(Watercooled)
3*Maxtor 120 GB fluid +9 SATA RAID-0
3Dmark01: 25250--Aquamark3: 66423--3Dmark03: 13780--3dmark05: 6361
Cool mod Mini :thumbsup:Originally posted by Mini
http://www.mainboard.dk/upload/files/DSCF0025.JPG
Darn comment... Looks insane... I only need to Vmodd mine... Thkin of gettin Revoltec Heastsinks for my gfx ram...
Just need to clench my butt cheeks and get it over with...
I was thinking about using one of the big SLK's for the core too, but settled for the smaller SLK600 as I wanted to make some HUGE sinks for the BGA's. Seeing your mod I might reconsider the mod though - xtreme is never xtreme enough
Btw: Why aren't you using two fans on top of that SLK900U
- DFI LANParty LT X38-T2R Rev. AA1
- Core 2 Duo E8500 @ 4009MHz, 1.31V
- TRUE @ 2x Scythe S-Flex SFF21F, 5V
- 4 x 2GB G.Skill Pi PC2-8800
- MSI R4870X2-T2D2G-OC
- 3x 74GB Raptor ICH9R Raid0 @ 128KB Stripe Size
- Plextor PX-716SA/T3KB DVD-RW
- Auzen X-Fi Prelude @ TI OPA637AU - Thule - Dali/Ultimate Ears - Argento
- SilverStone OP700
- CM Stacker 830 Evo
- Eizo FlexScan HD2441W - Audioquest DV-X
- WinVista Ultimate 64bit SP1
Really Huge Coolermaster Hyper 6 Heatpipe with two YS Tech w. poti
Good idea, All Kill3r.
I'll sticky this one.
Rig #1
Gigabyte P67A-UD4 trying to figure out this POS board
2600k @ ?????
2x2Gb GSkill RipJaws-X 1333 (7-7-7-21)
ATI 5850
Coba Nitrox 750W
Watercooled with HK 3.0 CU, Watercool GPU-X³ 5870 Nickel, PA120.3, Laing Ultra with XSPC top
Rig #2
DFI UT P35-T2R (0317 bios)
E8200 @ 4000 (1.216V) / 4100 (1.248V) / 4200 (1.296V) / 4300 (1.344V)
2x2Gb Chaintech Apogee GT PC2-8500
Powercolor 4870
Corsair 520HX
Watercooled with HK 3.0 CU, EK-FC4870, Feser tripple, Laing Ultra pump
I've got Supermicro boards that lasted longer than one of my marriages!
The Hyper 6 is a nice heatsink, isn't it? Here's a crappy phonecam pic of my work in progress mod of it on my 9800 Pro
It'll probably end up with 2 Tornados in push-pull, it all hinges on whether the AGP extender I'm getting will run the card alright, as otherwise I'd need to dremel out my PCI slots for the cooler to fit centrally on the core
...into eight of these
Pics of the complete card when finished
"Can anyone tell me the best way to find out what the ludicrously named
'System Idle Process' is actually doing? I can guarantee it's going to take
up 95% of processor resources, just when I'm in the middle of something
important." - god i love the internet
OMFG!
will you install the vga normally ? i mean... 1KG copper
Well it's not going in a case, I can tell you that for freeOriginally posted by TM30
OMFG!
will you install the vga normally ? i mean... 1KG copper
"Can anyone tell me the best way to find out what the ludicrously named
'System Idle Process' is actually doing? I can guarantee it's going to take
up 95% of processor resources, just when I'm in the middle of something
important." - god i love the internet
damn nice ramsinks there m8
Yeah, nice work on the BGA sinks Kameleon
- DFI LANParty LT X38-T2R Rev. AA1
- Core 2 Duo E8500 @ 4009MHz, 1.31V
- TRUE @ 2x Scythe S-Flex SFF21F, 5V
- 4 x 2GB G.Skill Pi PC2-8800
- MSI R4870X2-T2D2G-OC
- 3x 74GB Raptor ICH9R Raid0 @ 128KB Stripe Size
- Plextor PX-716SA/T3KB DVD-RW
- Auzen X-Fi Prelude @ TI OPA637AU - Thule - Dali/Ultimate Ears - Argento
- SilverStone OP700
- CM Stacker 830 Evo
- Eizo FlexScan HD2441W - Audioquest DV-X
- WinVista Ultimate 64bit SP1
Thanks guys - yours are pretty godlike too, LOLOriginally posted by comment
Yeah, nice work on the BGA sinks Kameleon
"Can anyone tell me the best way to find out what the ludicrously named
'System Idle Process' is actually doing? I can guarantee it's going to take
up 95% of processor resources, just when I'm in the middle of something
important." - god i love the internet
What did you do to that video card?Originally posted by comment
Does this Radeon 9800 Pro air cooling mod qualify for the Xtreme Air Cooling label?
I just had to ask.
Yep, first post. Noobie over here, well to here anyway.
My rig: Gigabyte GA-770T-USB3 mobo || AMD Phenom II X4 955 3.2GHz || ZALMAN CNPS10X Performa CPU cooler
G.SKILL 16GB DDR3 PC3 12800 Memory || Nvidia GT-220 video card || LG W2253 Monitor
HP Deskjet D4260 printer || LG GH22NS50B DVD R/W || WD1600AAJS & WD2502ABYS & Samsung HD753LJ hard drives
Cyberpower 1250AVR UPS || Cooler Master HAF-932 Case
Gentoo Linux | NO WINDOZE HERE
I've been told that the max voltage on the core is about 2.0V and on the mem 3.20-3.40V. For record benching you could go 2.10V on the core and 3.4-3.5V on the mem. Mine is fed 1.96V on the core and 3.08V on the mem on a daily basis.Originally posted by Kameleon
Thanks guys - yours are pretty godlike too, LOL
As to the back of the GPU, I made a sink for my old GF 4 Ti 4200 that fit right in the middle of the core where there's no risistors. Mounted it with thermal tape. Meassures: 30x30x25mm (LxWxH). What you do is to cut away some of the base without resizing the overall deminsions of the base. The result should be a sink with app. 10x10mm contact surface that fits in the middle of the core back with a bigger overall base size of 30x30mm. I haven't got any pic's but I hope the description makes sense to you.
I haven't been able to do that mod to my R9800Pro due to the Swiftech MCX159-R sitting on my northbridge.
Good luck
- DFI LANParty LT X38-T2R Rev. AA1
- Core 2 Duo E8500 @ 4009MHz, 1.31V
- TRUE @ 2x Scythe S-Flex SFF21F, 5V
- 4 x 2GB G.Skill Pi PC2-8800
- MSI R4870X2-T2D2G-OC
- 3x 74GB Raptor ICH9R Raid0 @ 128KB Stripe Size
- Plextor PX-716SA/T3KB DVD-RW
- Auzen X-Fi Prelude @ TI OPA637AU - Thule - Dali/Ultimate Ears - Argento
- SilverStone OP700
- CM Stacker 830 Evo
- Eizo FlexScan HD2441W - Audioquest DV-X
- WinVista Ultimate 64bit SP1
Welcome to the madnessOriginally posted by dalek
What did you do to that video card?
I just had to ask.
Yep, first post. Noobie over here, well to here anyway.
You can rest assured that the card runs hot when gaming a few hours
Last edited by comment; 06-22-2004 at 10:18 AM.
- DFI LANParty LT X38-T2R Rev. AA1
- Core 2 Duo E8500 @ 4009MHz, 1.31V
- TRUE @ 2x Scythe S-Flex SFF21F, 5V
- 4 x 2GB G.Skill Pi PC2-8800
- MSI R4870X2-T2D2G-OC
- 3x 74GB Raptor ICH9R Raid0 @ 128KB Stripe Size
- Plextor PX-716SA/T3KB DVD-RW
- Auzen X-Fi Prelude @ TI OPA637AU - Thule - Dali/Ultimate Ears - Argento
- SilverStone OP700
- CM Stacker 830 Evo
- Eizo FlexScan HD2441W - Audioquest DV-X
- WinVista Ultimate 64bit SP1
Well..
This is my Soltek Barebone...
I have mounted a Zally CNPS7000A-Cu on my A64....
I still need some Vmods on the mobo, cause i can only give the CPU 1.55vcore and 2.8vdimm, and thats just NOT enough for me
So rigth now its just running stock-speed (Pretty Xtreme, huh) and i cant live with that
Another pic...
Last edited by K32A; 06-23-2004 at 02:40 PM.
Shuttle SN95G5 V2
AMD Athlon64 3000+ Winchester @ 2430MHz, 1.47vcore
Club3D X800Pro 256MB
1GB Kingston Value PC3200 @ 221MHz, 3-3-8-3, 2.7v
200GB Maxtor DiamondMax 10
NEC 3500A DVD±RW
Acer AL1715 17" TFT
these are some of my pics. sory about the size.
Reply With Quote
Bookmarks