Of own heatsink , I have not purchased separately
Of own heatsink , I have not purchased separately
Seasonic Platinum 1000W + SLI GTX 580 Zotac
Antec P280 + Full Nidec GT + Prolimatech Megashadow
P8P67 Deluxe + I5-2500K @ 4,7Ghz + 2x4 G.Skill 2133Mhz cl9
Crucial M4 128 GB + Velociraptor 150 GB + Barracuda Green 2 TB
Creative X-Fi Xtreme Gamer + Plantronics Gamecom 380 + Logitech X-540
Recent purchase? Or old timer?
I ask because when I bought two pairs of 38mm Megahalems clips, one pair was conventional (flat, mounting over the top and under the bottom) and one pair was sidewinder like yours. The extra 25mm clips I bought were both flat. I like the look of your sidewinders.
Hotrod: Core i7 860 22x182 4GHz Vcore 1.3125v | Noctua NH-D14 w/ P14 + 2 x AP-14's
Gigabyte P55A-UD3P f13 | 4GB Ripjaws DDR3-2000 @1820MHz | Gigabyte HD 4670 1GB
Kingston V+ 64GB SSD + Barracuda 1TB 7200.12 | NZXT Beta Evo | Seasonic X-650
Approximately 2 to 3 years
Seasonic Platinum 1000W + SLI GTX 580 Zotac
Antec P280 + Full Nidec GT + Prolimatech Megashadow
P8P67 Deluxe + I5-2500K @ 4,7Ghz + 2x4 G.Skill 2133Mhz cl9
Crucial M4 128 GB + Velociraptor 150 GB + Barracuda Green 2 TB
Creative X-Fi Xtreme Gamer + Plantronics Gamecom 380 + Logitech X-540
Ah. So we will expect no more, then. Guard yours. They are now precious items.
Hotrod: Core i7 860 22x182 4GHz Vcore 1.3125v | Noctua NH-D14 w/ P14 + 2 x AP-14's
Gigabyte P55A-UD3P f13 | 4GB Ripjaws DDR3-2000 @1820MHz | Gigabyte HD 4670 1GB
Kingston V+ 64GB SSD + Barracuda 1TB 7200.12 | NZXT Beta Evo | Seasonic X-650
you can find more and better res. in http://d3516n3r.deviantart.com/
cheers!
Simple performance..
Configuration:
i7 3820
Thermalright Venomous X
Rampage IV Extreme
16Go G*skill ripjaws Extreme Z 2133mhz @2400mhz 10-12-11-29
3 Way Sli EVGA GTX 580 SC
Corsair AX1200W
OCZ agility 3 120go
Gigabyte GZ-X3
3x120mm Cooler Master Excalibur
Zalman ZM-MFC1 PLUS
Asus DRW-24B5ST
Périphériques :
Asus VG278H
Logitech G110
Logitech G9x
Razer Destructor
Hercules Lounge 2.1 32w
Netgear Pack XAV5004 + XAV5001
Roccat Kave 5.1
Last edited by jujutrib; 10-24-2012 at 07:43 AM.
i7 3820
Thermalright Venomous X
Rampage IV Extreme
16Go G*skill ripjaws Extreme Z 2133mhz @2400mhz 10-12-11-29
3 Way Sli EVGA GTX 580 SC
Corsair AX1200W
OCZ agility 3 120go
Gigabyte GZ-X3
3x120mm Cooler Master Excalibur
Zalman ZM-MFC1 PLUS
Asus DRW-24B5ST
I still have a Venomous X, one of the few that offer great performance with a quieter fan. With my fan (single Delta EFB1212LE), it's only 2-3c higher at 50% than full speed.
CPU: i5 2500k @ 4.2ghz
RAM: g.skill 4gb ripjaws ddr3 1600
MOBO: ASUS P8P67 Deluxe
VID: HD6950 @ 850/1300 (for now)
SOUND: Auzen X-Fi Prelude
PSU: Seasonic X-560
HDD: Seagate 500gb :: Samsung 500gb SATAII :: Samsung 1tb
CASE: Antec P182 w/window
COOLING: Panaflo 120x38mm medium-speed 2x :: Panaflo 120x25mm medium/low :: Thermalright Venomous X/ Delta 120x38mm low-speed
Most teenagers (some adults, as well) have changed to decide that rap sounds musical. If you haven't, put this in your signature.
Black in black.
I have an addiction to black
The speakers aren't! Some nice black Pioneer bookshelves can go there with a black Pyle amp
i3-8100 | GTX 970
Ryzen 5 1600 | RX 580
Assume nothing; Question everything
Testing San Ace H4011 for CPU cooler. Pitch and RPM are higher than trusty Delta AFB1212LE and temperatures are about the same. Delta was put on as top exhaust fan. Probably switch them back later, the San Ace works better as a case fan at low RPM, Delta has a choppier sound.
CPU: i5 2500k @ 4.2ghz
RAM: g.skill 4gb ripjaws ddr3 1600
MOBO: ASUS P8P67 Deluxe
VID: HD6950 @ 850/1300 (for now)
SOUND: Auzen X-Fi Prelude
PSU: Seasonic X-560
HDD: Seagate 500gb :: Samsung 500gb SATAII :: Samsung 1tb
CASE: Antec P182 w/window
COOLING: Panaflo 120x38mm medium-speed 2x :: Panaflo 120x25mm medium/low :: Thermalright Venomous X/ Delta 120x38mm low-speed
Most teenagers (some adults, as well) have changed to decide that rap sounds musical. If you haven't, put this in your signature.
Hotrod: Core i7 860 22x182 4GHz Vcore 1.3125v | Noctua NH-D14 w/ P14 + 2 x AP-14's
Gigabyte P55A-UD3P f13 | 4GB Ripjaws DDR3-2000 @1820MHz | Gigabyte HD 4670 1GB
Kingston V+ 64GB SSD + Barracuda 1TB 7200.12 | NZXT Beta Evo | Seasonic X-650
Most of what you see on heatsink is just stuck to the fins, I blow it out regularly. I think it needs to be brushed off. I did change back to the 38mm thick Delta, the noise is much smoother and it has more static pressure. Without direct venting, the chopping noise isn't heard. San Ace fans are just great as case fans, you can easily run them at 5v and still get plenty of airflow.
CPU: i5 2500k @ 4.2ghz
RAM: g.skill 4gb ripjaws ddr3 1600
MOBO: ASUS P8P67 Deluxe
VID: HD6950 @ 850/1300 (for now)
SOUND: Auzen X-Fi Prelude
PSU: Seasonic X-560
HDD: Seagate 500gb :: Samsung 500gb SATAII :: Samsung 1tb
CASE: Antec P182 w/window
COOLING: Panaflo 120x38mm medium-speed 2x :: Panaflo 120x25mm medium/low :: Thermalright Venomous X/ Delta 120x38mm low-speed
Most teenagers (some adults, as well) have changed to decide that rap sounds musical. If you haven't, put this in your signature.
Cleaned the Venomous X today with a cheap toothbrush, what a difference. I think it shaved 2-4c off my load temperature.
CPU: i5 2500k @ 4.2ghz
RAM: g.skill 4gb ripjaws ddr3 1600
MOBO: ASUS P8P67 Deluxe
VID: HD6950 @ 850/1300 (for now)
SOUND: Auzen X-Fi Prelude
PSU: Seasonic X-560
HDD: Seagate 500gb :: Samsung 500gb SATAII :: Samsung 1tb
CASE: Antec P182 w/window
COOLING: Panaflo 120x38mm medium-speed 2x :: Panaflo 120x25mm medium/low :: Thermalright Venomous X/ Delta 120x38mm low-speed
Most teenagers (some adults, as well) have changed to decide that rap sounds musical. If you haven't, put this in your signature.
I had to buy a new PSU as my old Tagan BZ-1100 died, and decided to take new pictures. With the new cables being much thinner I was able to install an extra fan into my ancient Antec P182. Please excuse the crappy phone camera:
Its too empty in there though, I really want to add one of these, but dont need to go SLI just yet:
Also my idle CPU temps are awesome for an air cooler:
Last edited by Mungri; 11-23-2012 at 08:35 AM.
Just regged to this site, and scrolling through a few pages I feel like such a casual with my inaudible i5 3570K build and unpretty sleeving. I'll post pictures once I get my pretty Gainward GTX 580 Phantom in the mail. Awesome stuff right here! :3
Old Standby:
DFI LANPARTY nF4 Ultra-D (R.AD0) 623-3 BIOS
AMD Athlon 64 3800+ X2 (CCBWE 0529SPMW)
THERMALRIGHT XP-90 w/Panaflo FBA09A12H-1AZ 90mm (56.8cfm) - AS Ceramique
MSI NX6600GT-TD128E GF 6600 GT PCI-E
WD Raptor 74G Boot, WD 1200JB IDE
NEC ND-3520AW Black
OCZ OCZ600ADJ ATX 600W
ALPS Black 1.44MB 3.5" Internal Floppy Drive Model DF354H121F
Lian Li PC-60USB B2 Silver Aluminum ATX Mid Tower Computer Case
Win XP Pro (32-bit) SP2
Lian Li Pitstop T60 ...cute little thing, I have a weakness for black anodized aluminum Lian Li.
This project has a long history and previously looked like this:
CPU: Intel Core i7-3770K Motherboard: Asus Maximus V Formula Graphics: Asus GTX 670 DCII TOP RAM: CORSAIR PLATINUM 16GB DDR3 1866
Hard Drive: OCZ Vertex 3 120GB Cooling: Corsair H100i OS: Window 7 Ultimate x64 SP1 Monitor: Samsung S27B970D PLS LED
Keyboard: Logitech MK700 Combo Power: Corsair Gold AX750W 80 Plus Case: NZXT 410 ELITE Speaker: Logitech X530
[CENTER]
Finally we have reached the penultimate update of the silent Lian Li! I got my Arctic Cooling S1 Plus heatsink at last and installed it a few nights ago. I thought their G1 thermal adhesive was going to be hard to work with as after I applied pressure and let go, the VRM sinks slid around, but luckily after curing for a few hours they didn't fall off and I was able to mount the actual VGA sink. First off, it's BIG, but not ginormously so, thus most cases will be able to swallow it. Secondly you really do have to check the heights of any capacitors on the board itself, as it JUST clears the tops of the capacitors on my MSI 7770:
View from the front intakes, relatively unimpeded, straight to the two passive sinks. I may build a duct for the bottom fan to channel air directly to the GPU and out the exhaust, but temps look fine at the moment, we'll see.
I used MSI's Kombustor to stress the GPU for an hour, and as you can see the max temps reported by Afterburner (and Hardware Monitor) was around 75C (it plateaued there and wouldn't go higher, and in fact started to drop).
View from bottom intake.
View from top intake.
I had some braided wire left over from suspending my Ninja and used it to brace the GPU sink as well. Instead of drooping down, it hangs perfectly parallel.
Close!
Brendan
I BLEED TOXIC GREEN
Something different today
Worklog 1: ★★★ Project: Icebreaker ★★★
Bundymania @Facebook: Come and join me now
Triple (360) Radiator Roundup with 22 Rads !
Swiftech MCP35X Pump Review /// Roundup -> Bay Reservoirs & Laing Tops !
Review: 22 CPU Waterblocks // Review: 4x Tecnofront Reservoirs !
Quad Radiator Roundup - 11 Rads tested
Update: Mora 2 / Mora 3 / Phobya 1080 Xtreme & Supernova 1260
Tubing Comparison: 3/8" & 5/8" from Masterkleer, Primochill, Tygon, Kooolance, Nalgene
Worklog 1: ★★★ Project: Icebreaker ★★★
Bundymania @Facebook: Come and join me now
Triple (360) Radiator Roundup with 22 Rads !
Swiftech MCP35X Pump Review /// Roundup -> Bay Reservoirs & Laing Tops !
Review: 22 CPU Waterblocks // Review: 4x Tecnofront Reservoirs !
Quad Radiator Roundup - 11 Rads tested
Update: Mora 2 / Mora 3 / Phobya 1080 Xtreme & Supernova 1260
Tubing Comparison: 3/8" & 5/8" from Masterkleer, Primochill, Tygon, Kooolance, Nalgene
Bookmarks