Page 16 of 302 FirstFirst ... 6131415161718192666116 ... LastLast
Results 376 to 400 of 7528

Thread: Air Cooled Gallery

  1. #376
    Xtreme Member
    Join Date
    Jan 2006
    Posts
    276
    My setup:

    Asrock Conroe865PE
    Intel Core2Duo E6600
    Zalman Fatal1ty FS-C77
    Corsair TwinX1024 XMS Xpert 3200XLL (Latency: 2-2-2-5 @ 200 MHz effective / Programmable LED Displays)
    OCZ DDR400 2x512MB Platinum 2K Extreme (2-3-2-5 @ 200 MHz)

    Gainward Bliss 7800GS+ G71 Core Golden Sample 512MB DDR3 Core: 540 MHz MEM: 1400 MHz
    OCZ Modstream 520 Watts PSU
    Promise FastTrack TX2000 RAID Controller
    2x Seagate Barracuda 7200.10 320GB ATA133 16MB CACHE in RAID0
    Promise FastTrack TX2300 RAID Controller
    2 x Western Digital Caviar RAID Edition 2 750GB SATA300 16MB CACHE in RAID1
    NEC ND-4550A

    Akasa Eclipse-62 Case
    Sunbeam Chrome Windmill Fancontroller
    (Together with 2 x 120 mm Aerocool Aeroturbine 3000 fans)

    --
    Samsung 913N (19"TFT, 8ms response time)
    Logitech G15 keyboard
    Logitech MX518 mouse (With Hyperglides)
    Logitech Rumblepad II
    Logitech Formula Force Feedback Wheel
    Sennheiser PC140 Headset


    --
    New photos! 24-02-07
    The Zalman cooler is back on, yay!




    Last edited by Da_maniaC; 04-23-2008 at 01:54 PM.

  2. #377
    Registered User
    Join Date
    May 2006
    Posts
    71
    lovin the setup maniac, but I must ask. Does your psu'z cables seem realllllllly hard to move around? like theyre really stiff? thats how mine are but there sure do look kicka$$
    3200+ (looking for nice opty or 4400+) stock clocks :: Ocz gold 2x1GB ddr500 @ 250mhz
    BFG 7900gtx OC stock (saving for another):: dfi lanparty ultra-d modded to SLI
    OCZ modstream 520W :: 160gb WD IDE

  3. #378
    Xtreme Member
    Join Date
    Jan 2006
    Posts
    276
    The motherboard power cable is almost impossible to bend, but the others are quite easy to move actually.

    Thanks for the compliments.

  4. #379
    Registered User
    Join Date
    May 2006
    Posts
    71
    mine too, I actually broke the clip that clips the connector to the 24 pin socket off just trying to get the d4mn thing to bend
    3200+ (looking for nice opty or 4400+) stock clocks :: Ocz gold 2x1GB ddr500 @ 250mhz
    BFG 7900gtx OC stock (saving for another):: dfi lanparty ultra-d modded to SLI
    OCZ modstream 520W :: 160gb WD IDE

  5. #380
    My own little world
    Join Date
    May 2005
    Location
    The Septic Isle
    Posts
    699


    Rig on the right is my main, X2-4200, ASRock Dual SATA2, 1GB CH-5, X800XT, FSP 500W, Stacker, 4x120mm (1 is Delta 190CFM )

    Can't show my 2nd rig here (SD 3700, 2GB, MSI neo2 Plat, Sonic Tower), as it just sit's on a box

    Rig on left is the Fiancee's, XP2400, NF7-S, 1GB DR400, Radeon 9000 Pro, FSP 350W, some case I picked up, 4x80mm

    She likes the silver+blue thing, I like the Space & Airflow
    Quote Originally Posted by JF-AMD View Post
    Dual proc client systems are like sex in high school. Everyone talks about it but nobody is really doing it.

  6. #381
    Xtreme Member
    Join Date
    Sep 2005
    Posts
    149
    AGP 6800GT and 7900GT. I decided to see what running AGP and PCIe cards togeather are like on the Asrock 939Dual.


    Yes its a pretty cramped case, which I doubt I could fit any sort of watercooling into.
    Last edited by Dr_at_Home; 06-16-2006 at 05:18 PM.
    Q6600 @ 3.2Ghz w/ TRUE -- Abit IP35 Pro -- G.skill 2x2GB PC2 8000
    EVGA GTX 260 Core 216 + 24" Acer X243w + 23" Acer H233H 1920x1080 + 22" Gateway FPD2275W
    Logitech Z-680 + Sennheiser HD485
    80GB x25-m - 300GB VR - 500GB - 500GB - 650w Mushkin

  7. #382
    Xtreme Member
    Join Date
    Apr 2006
    Location
    Belgium
    Posts
    468

    On the left also an 120mm Blue LED fan & a 80mm transparant fan in front of the left harddisks.
    If the side panel is attached there are three 80mm transparant fans.

    You guys like my mecano mod?
    This way a 92mm fan is cooling the hot back of my 7900GT.


    Now it's a little bit different.
    (don't mind the X300SE, my 7900GT is being rma'd)
    Here are some links, posting the pics would make my post look gigantic
    http://img48.imageshack.us/img48/8471/dscn16966qw.jpg
    http://img439.imageshack.us/img439/7245/dscn16940zs.jpg
    http://img48.imageshack.us/img48/2818/dscn16995zg.jpg


  8. #383
    Xtreme Member
    Join Date
    Apr 2005
    Posts
    271
    Mine:





    XP90 with silentcat. Going to replace the back 120mm coolermaster white led to a arctic cooling 120mm fan soon.
    i7 4770 | 24GB | Z87 Mpower | 1070FE | 512GB/1TB/2TB | WiNDy FC500 | 2713hm | 2.0 | 650w


  9. #384
    Xtreme Member
    Join Date
    Jun 2006
    Location
    México
    Posts
    458
    I always wanted to add a Silentcat to the XP-90 or XP-90c
    .
    Very nice. Keep going.

  10. #385
    Xtreme Member
    Join Date
    Dec 2005
    Location
    Northern VA
    Posts
    181


    new case, new zalman cooler
    My Rig
    DFI LanParty UT nF4 Ultra-D 4/06 BIOS
    AMD Opteron 165 CCBBE 0615EPMW @ 2700Mhz
    OCZ 2GB Platinum @ 225Mhz 3-4-4-8
    eVGA GeForce 8800GTX @ Stock
    WD Raptor 74GB WD Caviar 250GB

  11. #386
    Registered User
    Join Date
    Apr 2006
    Posts
    20



    It's IntelBOX for Xeon Nocona on my Xeon Prestonia Low Voltage.

    That cools really well. My CPUs do 30~32° C idle
    P4 EE 3.2 s478 / 1 GB DDR PC4800 A-Data / 3 HD SCSI Ultra320 / 4 HD SATA RAID-5 / 9800XT 256 MB
    dual Xeon LV 1.6 / 2 GB DDR PC3200 CAS 2 / 1 HD SCSI U320 15k / 4 HD SCSI U320 15k RAID-0 / GF7800 GS EE

  12. #387
    Xtreme Member
    Join Date
    May 2005
    Posts
    423
    Dr at home, I like the dual cards. I probably won't end up doing that because of power consumption, and I plan on modding my XP-90 to my next card. I wish there was a ASRock driver hack to do some kind of AGP-PCIe quasi SLI.

    I like your style.
    ASRock 939Dual-SATA2 (04XX)
    O165 CCBWE 0551 UPMW 1.8 GHz @ 2.6 GHz (9x289x4) 1.525V IHSless (SI-120 Bolt Modded)
    Corsair XMS 2GB DDR-400 2-3-3-6 2.75V @ DDR-473 3-3-2-1 2.5V
    ATi X800 Pro 475/450 @ 535/500
    SB Audigy 4
    Samsung 80GB 2MB PATA HDD
    3DMark05: 6000


    Ishkur's Guide To Electronic Music

  13. #388
    Registered User
    Join Date
    May 2004
    Location
    Germany - Karlsruhe
    Posts
    27
    Last edited by Ceylon; 06-23-2006 at 05:39 AM.
    Intel P4 3.2c - Scythe Ninja (silent) - 4 x 512MB MDT_DDR400(dual) - ASUS P4C800 Deluxe Rev2.0
    Gigabyte 6800 (silent) - Etasis 300W (silent)- Plextor PX-716AL - Silverstone TJ04 (2xAerocool Turbine 1000 / Innovatek FOM) - 2 x EIZO 768AS

  14. #389
    Xtreme Member
    Join Date
    May 2005
    Posts
    423
    Ceylon, where did you get that gpu cooler? It looks like a new one I saw from Thermalright. What temps do you get with fanless Ninja?
    ASRock 939Dual-SATA2 (04XX)
    O165 CCBWE 0551 UPMW 1.8 GHz @ 2.6 GHz (9x289x4) 1.525V IHSless (SI-120 Bolt Modded)
    Corsair XMS 2GB DDR-400 2-3-3-6 2.75V @ DDR-473 3-3-2-1 2.5V
    ATi X800 Pro 475/450 @ 535/500
    SB Audigy 4
    Samsung 80GB 2MB PATA HDD
    3DMark05: 6000


    Ishkur's Guide To Electronic Music

  15. #390
    Xtreme Member
    Join Date
    Apr 2005
    Location
    Norway, approx. 1367Miles from the Northpole
    Posts
    257
    This is my friend`s PC, all aircooled Did someone say dust?!


    Live to Mod.. Mod to Live!

  16. #391
    Xtreme Member
    Join Date
    Apr 2006
    Posts
    234
    Oh my god...

  17. #392
    Xtreme Member
    Join Date
    Jun 2006
    Location
    México
    Posts
    458
    Quote Originally Posted by ArcticOC
    This is my friend`s PC, all aircooled Did someone say dust?!



    !!! What about temps with that fan?

  18. #393
    IT Engineer in the making
    Join Date
    Jun 2003
    Location
    Former Kingdom of Bavaria
    Posts
    2,094
    @ArcticOC: Your friend smokes? It damn sure looks like he does. I know that ugly sticky dust that smoking creates.

    Really disgusting! Already had to clean some parts I bought from smokers. I'm so glad that noone in our family smokes and that we use the vacuum cleaner from time to time.
    Quote from one of our professors:
    "Reality is hiding in the imaginary part."

  19. #394
    Xtreme Cruncher
    Join Date
    Jul 2005
    Location
    London - UK
    Posts
    3,349
    Oh My ...!!

    Mate says: "it looks like its chewed up a teddybear"
    Core 2 Quad Q6600 @ 3GHz . DFI DK P45-T2RS Plus . XFX 9800GT 512MB . 8GB OCZ Blade PC2-9200 . WD6400AAKS AHCI .
    Creative X-Fi XtremeMusic . Hanns.G 28" LCD . Thermalright U120-E . Seasonic S12 600w . Windows 7 Professional E Retail x64 .

  20. #395
    Registered User
    Join Date
    May 2004
    Location
    Germany - Karlsruhe
    Posts
    27
    Quote Originally Posted by r3w4
    Ceylon, where did you get that gpu cooler? It looks like a new one I saw from Thermalright. What temps do you get with fanless Ninja?
    The gpu is a gigabyte 6800 Silent Pipe. You find my temps in this thread.
    Intel P4 3.2c - Scythe Ninja (silent) - 4 x 512MB MDT_DDR400(dual) - ASUS P4C800 Deluxe Rev2.0
    Gigabyte 6800 (silent) - Etasis 300W (silent)- Plextor PX-716AL - Silverstone TJ04 (2xAerocool Turbine 1000 / Innovatek FOM) - 2 x EIZO 768AS

  21. #396
    Xtreme Member
    Join Date
    Apr 2005
    Location
    Norway, approx. 1367Miles from the Northpole
    Posts
    257
    Quote Originally Posted by celemine1Gig
    @ArcticOC: Your friend smokes? It damn sure looks like he does. I know that ugly sticky dust that smoking creates.

    Really disgusting! Already had to clean some parts I bought from smokers. I'm so glad that noone in our family smokes and that we use the vacuum cleaner from time to time.
    Yes he smokes.. alot

    The brown dust was kinda sticky, I belive it was the tare that did the trick. He claened it one year ago. I belive you could fry a chicken inside the case before the cleanup
    Live to Mod.. Mod to Live!

  22. #397
    Xtreme Member
    Join Date
    Apr 2005
    Posts
    271
    OMG~

    I will NEVER that happen to my pc inside.
    i7 4770 | 24GB | Z87 Mpower | 1070FE | 512GB/1TB/2TB | WiNDy FC500 | 2713hm | 2.0 | 650w


  23. #398
    Registered User
    Join Date
    May 2006
    Posts
    25
    im surprised it didn't go in in flames!!
    DFI LanParty UT Nforce 3 Ultra-D 939
    AMD Athlon 64 3700+ @ 3.025GHz (11x 275MHz)
    2Gb Corsair XMS DDR4000 Pro
    XFX 6800GT @436/1150

  24. #399
    Xtreme Member
    Join Date
    Apr 2006
    Location
    Belgium
    Posts
    468
    http://techrepublic.com.com/2300-10877-5911196.html
    You think the owner of this computer smokes?


  25. #400
    Xtreme Member
    Join Date
    Jan 2005
    Location
    No(r)way
    Posts
    452
    Quote Originally Posted by SMa
    http://techrepublic.com.com/2300-10877-5911196.html
    You think the owner of this computer smokes?
    Nah, that's just insulation
    ArcticOC: That looks like a lawn mower put upside down on a motherboard. A Zalman lawn mower that is.
    Obsolescence be thy name

Page 16 of 302 FirstFirst ... 6131415161718192666116 ... LastLast

Tags for this Thread

Bookmarks

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •