Page 1 of 301 12341151101 ... LastLast
Results 1 to 25 of 7519

Thread: Air Cooled Gallery

  1. #1
    Xtreme Member
    Join Date
    Mar 2004
    Location
    Virginia
    Posts
    432

    Air Cooled Gallery

    The other cooling forums have their own galleries. Why doesn't the air cooling forum have one ? I say we start it up Air cooling doesn't mean you can't be extreme
    Attached Images Attached Images
    • File Type: jpg pc.jpg (112.4 KB, 58747 views)

  2. #2
    Xtreme Member
    Join Date
    Mar 2004
    Location
    Virginia
    Posts
    432


    post em up fellas
    Attached Images Attached Images

  3. #3
    Xtreme Member
    Join Date
    May 2004
    Posts
    312
    How do you upload imagse thru the forums? If not whos a good host i can use?

    *sigh* my mom took her digi cam with her today, ill get pics up tommorrow
    Last edited by SuperDude; 06-12-2004 at 12:34 PM.

  4. #4
    Xtreme Member
    Join Date
    Mar 2004
    Location
    Virginia
    Posts
    432
    when you make a post, theres an attach file button down there below the smiley box.. click browse and select the pic, must be gif, jpg, png, txt, zip, bmp, jpeg, or doc no bigger then 204800 bytes

  5. #5
    Xtreme Member
    Join Date
    May 2004
    Posts
    312
    hrmm, says i may not post attatchments.....

  6. #6
    Xtreme Guru
    Join Date
    May 2004
    Location
    the cold place Temp: 5C
    Posts
    3,764
    It works for me.


    Thats a 120x38MM 1amp fan. Its not even too loud. The HS is a heavily modded VGA silencer.
    Attached Images Attached Images
    For those of you about to post:

  7. #7
    Xtreme Addict
    Join Date
    Jun 2004
    Location
    USA, Vermont
    Posts
    1,065
    craig what did you do to the VGA?
    http://smbach.com/mad.gif

    Opty 175 Rig
    Lian-Li PC75B case, Thermaltake BT w/ 165 CFM delta fan, Enermax 550watt PSU (36A on 12+), x1950 Pro, DFI Lanparty NForce 4 Ultra-d (moded for SLI so that i can use the second slot at 8x), Opteron 175 CCBWE 0547 TMPW (2.80, 280x10, 1.5 volts), 2x1gb Mushkin Redline xp4000 (280 3-3-2-8, 2.65 volts), 80GB WD

    AM3 Rig
    Lian-Li PC-75b case, Asus Crosshair III Formula, 965 x4 C3 @ 4.1 1.525 volts 2.8 NB 1.25 volts, 2x2gb Dominator GT Cas 8 2000Mhz@ 1720 6-6-5-18-22 1.725 volts, Asus 5770 VT @1010/1435, Seasonic 850watt PSU 2x12v rails 40 amps each, 36GB raptor boot drive, 80GB WD storage drive, HeatKiller LT cpu block, BI GTX 360 with 6x Scythe 3000RPM fans in push/pull, MCP 655 variable pump on setting 5, EK 150ml res, all 1/2 inch

    DFI NF4 BIOS Guide

  8. #8
    Xtreme Enthusiast
    Join Date
    Apr 2004
    Location
    aarhus, denmark...
    Posts
    534
    Does this Radeon 9800 Pro air cooling mod qualify for the Xtreme Air Cooling label?
    Attached Images Attached Images
    Last edited by comment; 06-14-2004 at 07:28 AM.
    • DFI LANParty LT X38-T2R Rev. AA1
    • Core 2 Duo E8500 @ 4009MHz, 1.31V
    • TRUE @ 2x Scythe S-Flex SFF21F, 5V
    • 4 x 2GB G.Skill Pi PC2-8800
    • MSI R4870X2-T2D2G-OC
    • 3x 74GB Raptor ICH9R Raid0 @ 128KB Stripe Size
    • Plextor PX-716SA/T3KB DVD-RW
    • Auzen X-Fi Prelude @ TI OPA637AU - Thule - Dali/Ultimate Ears - Argento
    • SilverStone OP700
    • CM Stacker 830 Evo
    • Eizo FlexScan HD2441W - Audioquest DV-X
    • WinVista Ultimate 64bit SP1

  9. #9
    Xtreme Member
    Join Date
    Aug 2002
    Location
    virginia beach
    Posts
    192
    im speechless ...
    msi k8n neo2 plat
    3200+ winchester (10x262)
    bfg 6800gt
    pdp pc3200 xbl
    thermalright xp-90 w/7v tornado 92mm

  10. #10
    Xtreme Enthusiast
    Join Date
    Mar 2004
    Location
    Denmark
    Posts
    558
    http://www.mainboard.dk/upload/files/DSCF0025.JPG

    Darn comment... Looks insane... I only need to Vmodd mine... Thkin of gettin Revoltec Heastsinks for my gfx ram...

    Just need to clench my butt cheeks and get it over with...
    P4 3.0C 800@3.64 242FSB 1.625Vcore on Ic7 max3(Watercooled)
    Corsair 2x512@DDR484Mhz PC4000( 3-4-4-8 )2.8V
    X800XT@586/594(Watercooled)
    3*Maxtor 120 GB fluid +9 SATA RAID-0
    3Dmark01: 25250--Aquamark3: 66423--3Dmark03: 13780--3dmark05: 6361

  11. #11
    Xtreme Enthusiast
    Join Date
    Apr 2004
    Location
    aarhus, denmark...
    Posts
    534
    Originally posted by Mini
    http://www.mainboard.dk/upload/files/DSCF0025.JPG

    Darn comment... Looks insane... I only need to Vmodd mine... Thkin of gettin Revoltec Heastsinks for my gfx ram...

    Just need to clench my butt cheeks and get it over with...
    Cool mod Mini :thumbsup:

    I was thinking about using one of the big SLK's for the core too, but settled for the smaller SLK600 as I wanted to make some HUGE sinks for the BGA's. Seeing your mod I might reconsider the mod though - xtreme is never xtreme enough

    Btw: Why aren't you using two fans on top of that SLK900U
    • DFI LANParty LT X38-T2R Rev. AA1
    • Core 2 Duo E8500 @ 4009MHz, 1.31V
    • TRUE @ 2x Scythe S-Flex SFF21F, 5V
    • 4 x 2GB G.Skill Pi PC2-8800
    • MSI R4870X2-T2D2G-OC
    • 3x 74GB Raptor ICH9R Raid0 @ 128KB Stripe Size
    • Plextor PX-716SA/T3KB DVD-RW
    • Auzen X-Fi Prelude @ TI OPA637AU - Thule - Dali/Ultimate Ears - Argento
    • SilverStone OP700
    • CM Stacker 830 Evo
    • Eizo FlexScan HD2441W - Audioquest DV-X
    • WinVista Ultimate 64bit SP1

  12. #12
    Xtreme Member
    Join Date
    May 2004
    Location
    Germany
    Posts
    170
    Really Huge Coolermaster Hyper 6 Heatpipe with two YS Tech w. poti

  13. #13
    Xtreme X.I.P.
    Join Date
    Jun 2002
    Location
    Belgium
    Posts
    4,904
    Good idea, All Kill3r.
    I'll sticky this one.
    Rig #1
    Gigabyte P67A-UD4 trying to figure out this POS board
    2600k @ ?????
    2x2Gb GSkill RipJaws-X 1333 (7-7-7-21)
    ATI 5850
    Coba Nitrox 750W
    Watercooled with HK 3.0 CU, Watercool GPU-X³ 5870 Nickel, PA120.3, Laing Ultra with XSPC top


    Rig #2
    DFI UT P35-T2R (0317 bios)
    E8200 @ 4000 (1.216V) / 4100 (1.248V) / 4200 (1.296V) / 4300 (1.344V)
    2x2Gb Chaintech Apogee GT PC2-8500
    Powercolor 4870
    Corsair 520HX
    Watercooled with HK 3.0 CU, EK-FC4870, Feser tripple, Laing Ultra pump


    Quote Originally Posted by Movieman View Post
    I've got Supermicro boards that lasted longer than one of my marriages!

  14. #14
    Xtreme Member
    Join Date
    Jan 2004
    Location
    Manchester, UK
    Posts
    159
    The Hyper 6 is a nice heatsink, isn't it? Here's a crappy phonecam pic of my work in progress mod of it on my 9800 Pro



    It'll probably end up with 2 Tornados in push-pull, it all hinges on whether the AGP extender I'm getting will run the card alright, as otherwise I'd need to dremel out my PCI slots for the cooler to fit centrally on the core Need to chop up some huge BGA sinks for it too, the current ones are abysmal, and the new ones aren't big enough for my liking - turned two of these, i865 NB sinks...



    ...into eight of these



    Pics of the complete card when finished


    "Can anyone tell me the best way to find out what the ludicrously named
    'System Idle Process' is actually doing? I can guarantee it's going to take
    up 95% of processor resources, just when I'm in the middle of something
    important."
    - god i love the internet

  15. #15
    Xtreme Member
    Join Date
    May 2004
    Location
    Germany
    Posts
    170
    OMFG!

    will you install the vga normally ? i mean... 1KG copper

  16. #16
    Xtreme Member
    Join Date
    Jan 2004
    Location
    Manchester, UK
    Posts
    159
    Originally posted by TM30
    OMFG!

    will you install the vga normally ? i mean... 1KG copper
    Well it's not going in a case, I can tell you that for free The weight would shear the card in half. It'll just be a motherboard-sitting-on-box job like it is now, with the cooler resting on the PCI slots. I've had to buy an AGP extender too, which will make the board even less portable Expect some sort of ghetto mod like Coke bottle caps to hold the cooler up off the PCI slots as with the extender in there'll be a bit of a gap between it and the board. HaLDoL just broke Stang's aircooled XP record, I'd like to shoot for that if at all possible


    "Can anyone tell me the best way to find out what the ludicrously named
    'System Idle Process' is actually doing? I can guarantee it's going to take
    up 95% of processor resources, just when I'm in the middle of something
    important."
    - god i love the internet

  17. #17
    Xtreme Member
    Join Date
    Mar 2004
    Location
    Virginia
    Posts
    432
    damn nice ramsinks there m8

  18. #18
    Xtreme Enthusiast
    Join Date
    Apr 2004
    Location
    aarhus, denmark...
    Posts
    534
    Yeah, nice work on the BGA sinks Kameleon
    • DFI LANParty LT X38-T2R Rev. AA1
    • Core 2 Duo E8500 @ 4009MHz, 1.31V
    • TRUE @ 2x Scythe S-Flex SFF21F, 5V
    • 4 x 2GB G.Skill Pi PC2-8800
    • MSI R4870X2-T2D2G-OC
    • 3x 74GB Raptor ICH9R Raid0 @ 128KB Stripe Size
    • Plextor PX-716SA/T3KB DVD-RW
    • Auzen X-Fi Prelude @ TI OPA637AU - Thule - Dali/Ultimate Ears - Argento
    • SilverStone OP700
    • CM Stacker 830 Evo
    • Eizo FlexScan HD2441W - Audioquest DV-X
    • WinVista Ultimate 64bit SP1

  19. #19
    Xtreme Member
    Join Date
    Jan 2004
    Location
    Manchester, UK
    Posts
    159
    Originally posted by comment
    Yeah, nice work on the BGA sinks Kameleon
    Thanks guys - yours are pretty godlike too, LOL Anyone got any quick suggestions as to what would be relatively safe to push the voltages to with this cooling? I'm also thinking of trying to get something for the backside of the GPU but I have no idea how I'd buffer it from crushing the SMD resistors...


    "Can anyone tell me the best way to find out what the ludicrously named
    'System Idle Process' is actually doing? I can guarantee it's going to take
    up 95% of processor resources, just when I'm in the middle of something
    important."
    - god i love the internet

  20. #20
    Registered User
    Join Date
    Jun 2004
    Location
    Mississippi/USA/Earth
    Posts
    19
    Originally posted by comment
    Does this Radeon 9800 Pro air cooling mod qualify for the Xtreme Air Cooling label?
    What did you do to that video card? Have you ever had it to run hot by any chance?

    I just had to ask.

    Yep, first post. Noobie over here, well to here anyway.

    My rig: Gigabyte GA-770T-USB3 mobo || AMD Phenom II X4 955 3.2GHz || ZALMAN CNPS10X Performa CPU cooler
    G.SKILL 16GB DDR3 PC3 12800 Memory || Nvidia GT-220 video card || LG W2253 Monitor
    HP Deskjet D4260 printer || LG GH22NS50B DVD R/W || WD1600AAJS & WD2502ABYS & Samsung HD753LJ hard drives
    Cyberpower 1250AVR UPS || Cooler Master HAF-932 Case

    Gentoo Linux | NO WINDOZE HERE

  21. #21
    Xtreme Enthusiast
    Join Date
    Apr 2004
    Location
    aarhus, denmark...
    Posts
    534
    Originally posted by Kameleon
    Thanks guys - yours are pretty godlike too, LOL Anyone got any quick suggestions as to what would be relatively safe to push the voltages to with this cooling? I'm also thinking of trying to get something for the backside of the GPU but I have no idea how I'd buffer it from crushing the SMD resistors...
    I've been told that the max voltage on the core is about 2.0V and on the mem 3.20-3.40V. For record benching you could go 2.10V on the core and 3.4-3.5V on the mem. Mine is fed 1.96V on the core and 3.08V on the mem on a daily basis.

    As to the back of the GPU, I made a sink for my old GF 4 Ti 4200 that fit right in the middle of the core where there's no risistors. Mounted it with thermal tape. Meassures: 30x30x25mm (LxWxH). What you do is to cut away some of the base without resizing the overall deminsions of the base. The result should be a sink with app. 10x10mm contact surface that fits in the middle of the core back with a bigger overall base size of 30x30mm. I haven't got any pic's but I hope the description makes sense to you.

    I haven't been able to do that mod to my R9800Pro due to the Swiftech MCX159-R sitting on my northbridge.

    Good luck
    • DFI LANParty LT X38-T2R Rev. AA1
    • Core 2 Duo E8500 @ 4009MHz, 1.31V
    • TRUE @ 2x Scythe S-Flex SFF21F, 5V
    • 4 x 2GB G.Skill Pi PC2-8800
    • MSI R4870X2-T2D2G-OC
    • 3x 74GB Raptor ICH9R Raid0 @ 128KB Stripe Size
    • Plextor PX-716SA/T3KB DVD-RW
    • Auzen X-Fi Prelude @ TI OPA637AU - Thule - Dali/Ultimate Ears - Argento
    • SilverStone OP700
    • CM Stacker 830 Evo
    • Eizo FlexScan HD2441W - Audioquest DV-X
    • WinVista Ultimate 64bit SP1

  22. #22
    Xtreme Enthusiast
    Join Date
    Apr 2004
    Location
    aarhus, denmark...
    Posts
    534
    Originally posted by dalek
    What did you do to that video card? Have you ever had it to run hot by any chance?

    I just had to ask.

    Yep, first post. Noobie over here, well to here anyway.

    Welcome to the madness

    You can rest assured that the card runs hot when gaming a few hours
    Last edited by comment; 06-22-2004 at 10:18 AM.
    • DFI LANParty LT X38-T2R Rev. AA1
    • Core 2 Duo E8500 @ 4009MHz, 1.31V
    • TRUE @ 2x Scythe S-Flex SFF21F, 5V
    • 4 x 2GB G.Skill Pi PC2-8800
    • MSI R4870X2-T2D2G-OC
    • 3x 74GB Raptor ICH9R Raid0 @ 128KB Stripe Size
    • Plextor PX-716SA/T3KB DVD-RW
    • Auzen X-Fi Prelude @ TI OPA637AU - Thule - Dali/Ultimate Ears - Argento
    • SilverStone OP700
    • CM Stacker 830 Evo
    • Eizo FlexScan HD2441W - Audioquest DV-X
    • WinVista Ultimate 64bit SP1

  23. #23
    Xtreme Member
    Join Date
    Mar 2004
    Location
    Denmark
    Posts
    141
    Well..

    This is my Soltek Barebone...

    I have mounted a Zally CNPS7000A-Cu on my A64....




    I still need some Vmods on the mobo, cause i can only give the CPU 1.55vcore and 2.8vdimm, and thats just NOT enough for me
    I want to overclock this bastard

    So rigth now its just running stock-speed (Pretty Xtreme, huh ) and i cant live with that

    Another pic...




    Last edited by K32A; 06-23-2004 at 02:40 PM.
    Shuttle SN95G5 V2
    AMD Athlon64 3000+ Winchester @ 2430MHz, 1.47vcore
    Club3D X800Pro 256MB
    1GB Kingston Value PC3200 @ 221MHz, 3-3-8-3, 2.7v
    200GB Maxtor DiamondMax 10
    NEC 3500A DVD±RW
    Acer AL1715 17" TFT

  24. #24
    Xtreme Member
    Join Date
    Dec 2003
    Location
    Canada, Born in Serbia
    Posts
    126
    these are some of my pics. sory about the size.








  25. #25
    Xtreme Member
    Join Date
    May 2004
    Posts
    164
    I just need a host for the pics.


Page 1 of 301 12341151101 ... LastLast

Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •