Thanks. Not bad for a 219MHz FSB, but I have not updated that score since I got my Mushkin 2-2-2 special. Might do it tonight.
Got a link for that Gigabyte BIOS?
Thanks. Not bad for a 219MHz FSB, but I have not updated that score since I got my Mushkin 2-2-2 special. Might do it tonight.
Got a link for that Gigabyte BIOS?
Within the archive mateOriginally posted by StormPC
Thanks. Not bad for a 219MHz FSB, but I have not updated that score since I got my Mushkin 2-2-2 special. Might do it tonight.
Got a link for that Gigabyte BIOS?
http://paddy007uk.freeservers.com/VG...ga%20flash.rar
Thanks Michael.Originally posted by Paddy007uk
Within the archive mate
http://paddy007uk.freeservers.com/VG...ga%20flash.rar
Last edited by StormPC; 06-30-2004 at 09:10 PM.
I take it this mod is only for the VIVO versions of the X800 Pro??
"The command and conquer model," said the EA CEO, "doesn't work. If you think you're going to buy a developer and put your name on the label... you're making a profound mistake."
Yes, ViVo only.
My Club3D ViVo arrived 1-2 hours ago and is now running at 16 pipes!
I even have the XT sticker upon the cooler.
Viva ATI!
I bought a powercolour x800 pro and it wasn't a vivo and it worked. the actual board had the rage chip and so on, but the product that I bought was an x800 pro
Pentium 4 2.8 @ 3.3ghz
Abit IS7 mobo
1024mb ddr 400 ram
Powercolour X800 pro @ XT
That's Correct.... they all seems to be XT cores with 1.6ns DDR3...Originally posted by Kunaak
I take it this mod is only for the VIVO versions of the X800 Pro??
Mollov,
Runnin' a 700MHz SlotA Thunderbird...
HardwareSight.com Owner
I'm having troubble
While benching my system hangs. Screen goes blank and goes to standby. I have restart the whole
This happens after a while. Maybe it's heat-related?
I have it running @
GPU: 472
MEM: 450
:o
Why is this happening?
I flashed fiorst with the Gainward bios, then with the ATi X800 XT one.
HAHA!
Problem solved!!!
I flashed back to my X800 Pro BIOS. Clocks went back to normal, no more unstalility, i can overclock again and all 16 pipelines are working!
Just playes FarCry online for 30 minutes.. didn't freeze once!
Last edited by fixxer; 07-01-2004 at 01:49 AM.
specs: http://fixxer.sytes.net/hardware.htm
so your running an x800 pro bios and still have all 16 pipelines?
Yes!
specs: http://fixxer.sytes.net/hardware.htm
maybe that was the problemOriginally posted by fixxer
I flashed fiorst with the Gainward bios
funny typo
interesting to hear the 16 pipes are working even when you flash back to a pro bios.
can you oc better with the pro or the xt bios?
I just bought a PowerColor X800Pro w/ VIVO...so hopefully it will flash just fine.
Do any of you guys notice a heat issue when doing this mod? I'll be on stock cooling for a while, so I don't want my card to heat up badly and render it useless.
Thanks
Shock'D:
CPU: Intel 2500k @ 5.0GHz
Motherboard: ASUS MIVE
RAM: GSKill 1866 @ 7-9-7-24
Video: 2 x HD6970 @ 940/1425
PSU: Corsair AX1200W
Case: Custom TJ07
Cooling: Cooled by EK and HWLabs
Originally posted by saaya
maybe that was the problem
funny typo
interesting to hear the 16 pipes are working even when you flash back to a pro bios.
can you oc better with the pro or the xt bios?
Sorry bout the typo's
While using the XT BIOS i could not overclock as much as i could using the PRO BIOS.
I got over 57.000 in Aquamark 03 with the PRO and 16 pipelines.
Last edited by fixxer; 07-01-2004 at 06:50 AM.
specs: http://fixxer.sytes.net/hardware.htm
With 60 pipelines you may play farcry at 500 fps but you need a 1 kW power supply!
Opps! I ment 16!
hehe..
specs: http://fixxer.sytes.net/hardware.htm
That brings up an interesting question. Has anybody tried the Gigabyte BIOS on a non-VIVO card that has been modded?Originally posted by Kunaak
I take it this mod is only for the VIVO versions of the X800 Pro??
tried it on a moded Club3D Non Vivo with moded bridge.Originally posted by StormPC
That brings up an interesting question. Has anybody tried the Gigabyte BIOS on a non-VIVO card that has been modded?
No go
Cpu: Core i7 930 @ 4.5 Ghz 1.4V (24/7)
Mainboard: Classified E760 @ B3 X58 + EK Waterblock
Memory: 6GB Kingston Hyper @ 2150Mhz 8-8-8-28 -> 1.72V
Graphics Card: HD5870 + EK-Waterblock
Soundcard: Auzentech X-Fi Forte
Boot HDD: WD Velociraptor 300 GB
Stuff HDD: 4x 1TB Samsung HD103UJ @ Raid5 (Perc 5i + 512MB)
PSU: Corsair 1000Watt Modulair
Water Cooling Setup: WC Setup --> Swiftech Apogee XT / Black Ice 360 GTX / 3x Triebwerk TK-122 / 2x DDC 355 Plus + XSPC Dual Top / EK-Spin Bay Reservoir
All build in a Corsair Obsidian 800D
It is a no go because the non vivo pro uses the AA chipset that is different from the AD used by XT and VIVO.
It has a different asic code and any piece of software can recognize that it is not an XT card.
What about the cards that were modded successfully that are not VIVO? Do you think they lied or do their cards have the AD chipset?
No, first pro core releases (AA) have not any further protection than the lasercut.
Latest GA, every GB and GC cores seem to have another protection that controls the GPU I/O addresses where there is the asic code and if someone try to change it, it is suddenly restored the original one.
I just tried the Gigabyte bios on my nonVIVO Pro.
flashing went well, but pipes are still 12
I have Overdrive feature and coretemp reading available now.
Recognised as "R420" with 4.7beta Cats.
215RAACGA11F
GC0018.1
0421AA
21st week!
Last edited by Goldlocke; 07-01-2004 at 11:04 AM.
AMD Phenom II 940 black edition, DFI LP DK790FXB-M2RSH @ 240 x 15.5 | 4GB OCZ Platinum CL4 | NexXxos X² Highflow | 2x Eheim 1048 | Enermax EG701 | 2x WD3200AAKS Raid 0 | HD4870 watercooled | Win7 64bit
I have this video card:
http://www.newegg.com/app/ViewProduc...102-364&depa=0
Its a vivo
I tried the rx80x256v.f1 biod with this command:
gvf11 -p -f rx80x256v.f1
no go...
any ideas, or something im missing? Do i have to install new drivers after the flash? help pls
The flash works i got the xt speeds, but 12 pipes
If the card in the picture is the card you actually received it's not VIVO, but TVO.Originally posted by advanced
I have this video card:
http://www.newegg.com/app/ViewProduc...102-364&depa=0
Its a vivo
I tried the rx80x256v.f1 biod with this command:
gvf11 -p -f rx80x256v.f1
no go...
any ideas, or something im missing? Do i have to install new drivers after the flash? help pls
The flash works i got the xt speeds, but 12 pipes
Be careful RMA'ing to Newegg. They are ba$tards!
Here's a screenie of my current setup.. Do you think i can get the clocks any higher?
What do you have them set at? I think it's verry odd that some can clock way higher than others on the same card!
Notice the 16 pipelines.
(My card is a sapphire x800 pro if that is of importance...)
specs: http://fixxer.sytes.net/hardware.htm
At stock volts (1.3v) you should be able to run around 540/580 on average. At 1.4v it's more like 570/610. These are averages plus or minus 5-10 points, on stock air.
You have to play with it. If memory's too high you'll get arties and if GPU core is too high it will freeze.
Posting Permissions
Reply With Quote
Bookmarks