Results 1 to 16 of 16

Thread: So close to 20k 01 finally..

  1. #1
    c[_]
    Join Date
    Nov 2002
    Location
    Alberta, Canada
    Posts
    18,728

    So close to 20k 01 finally..

    Almost to 20k on my 9700 pro finally.. with crappy fsb and only 2400mhz cpu too lol

    http://service.futuremark.com/compare?2k1=8320294

    Had to drop to 425/355 so nature wouldnt bug... this is more or less everyday settings too.

    All along the watchtower the watchmen watch the eternal return.

  2. #2
    Xtreme Addict
    Join Date
    Nov 2003
    Location
    happy place
    Posts
    2,337
    congrats, nicely done. 20K has been the biggest barrier for me too.
    --===== proud owner of new razor tarantula gaming keyboard =====--

  3. #3
    Xtreme Addict
    Join Date
    May 2004
    Location
    Perth, Western Australia
    Posts
    1,622
    24k was the hardest, got it on my old cpu/board and getting back was difficult with 100mhz less cpu clocks
    hey why didnt you use the UT?
    nice score for axp+8 pipes
    Quote Originally Posted by bh2k
    sorry m, OI'm a bit drunkz!
    Air benches with 3000+, DFI nf3 and 6800GT 2001SE: 26312 3d03: 13028

  4. #4
    c[_]
    Join Date
    Nov 2002
    Location
    Alberta, Canada
    Posts
    18,728
    Waiting on new PSU before I put the UT to use.. I had to put my "spare" PSU that was on the bench in here since my daily use one stopped working for some reason.

    Still works actually, but if I put it on this rig it wont go into windows anymore.. need to test it out thoroughly and redo the 3.3v sense mod while i'm at it. Antec 400w Smartpower..


    I might swap the fan on the 9700 pro (modified VGA silencer rev2 with 70mm "silent" fan) and see if I can crack 20k at 2400mhz heh...

    All along the watchtower the watchmen watch the eternal return.

  5. #5
    Xtreme Mentor
    Join Date
    Apr 2003
    Location
    Ankara Turkey
    Posts
    2,631
    try using an old omega driver which one i cant remember (3.2 to 3.5 range catalyst moded i think)but the one with 9700pro 9800pro softmod (dont know what actually it does) it give me extra 1k and that made me pass 20k good luck


    When i'm being paid i always do my job through.

  6. #6
    c[_]
    Join Date
    Nov 2002
    Location
    Alberta, Canada
    Posts
    18,728
    that mod is in all drivers after 3.1 iirc... and 4.12's are faster than 3.2's so far.

    Omega are slow.

    All along the watchtower the watchmen watch the eternal return.

  7. #7
    Xtreme Enthusiast
    Join Date
    Oct 2003
    Location
    Alpine, TX, USA
    Posts
    672
    Quote Originally Posted by STEvil
    that mod is in all drivers after 3.1 iirc... and 4.12's are faster than 3.2's so far.

    Omega are slow.
    Omega 8.07 Hotfix were gewd But the 4.12's are better afaik

    Score looks pretty good for the clocks. Can't you get more out of that Mobile?

    Redline 3D Socket 754 = 40,179
    Retired

  8. #8
    Xtreme 3DMark Addict
    Join Date
    Sep 2003
    Posts
    4,225
    If you upgrade to win2k youd probably have 20k right there. nice gpu clocks your crushing me by 20fps in nature but now that my gpu clocks higher I should be no more than 10fps below your nature
    3000+ Venice 240x9=2.16GHz(ondie controller limit) 2x512mb patriot tccd ram
    9700pro at 325/310 runs all games buttery smooth!

    9700(8 pipe softmod, 128m) at 410/325 23821 at 325/310 21287 at 275/270 19159
    9500(4 pipes, 128m) at 420/330 18454 at 275/270 13319
    9500(8 pipe softmod, 64m) at 390/310 19201 at 275/270 16052
    9500(4 pipes, 64m) at 400/310 16215 at 275/270 12560
    3dmark scores with Ti4200 and Ti4800se
    Ti4200 at 340/730 19558 at 300/650 18032 at 275/550 16494 at 250/500 15295
    3dmark scores with older gpus
    Ti500 at 275/620 14588 Ti200 at 260/540 13557 MX440 at 380/680 11551

  9. #9
    c[_]
    Join Date
    Nov 2002
    Location
    Alberta, Canada
    Posts
    18,728
    I can bench it at 2446, but i'm trying to stay at or under 2400mhz and 200fsb.. the problem is the motherboard I think because it only takes 1.75v for 2430mhz stable, but even with 1.9v 2450mhz isnt stable...

    Two friends grabbed chips from the same batch and they both do 2650 at 1.9 on air on an Epox 8rda+... should test this one on that board I guess.

    All along the watchtower the watchmen watch the eternal return.

  10. #10
    Xtreme 3DMark Addict
    Join Date
    Sep 2003
    Posts
    4,225
    If you can get the fsb up even 10MHz, it will help BIG time. athlon xps lack an ondie controller so I find that each MHz on the fsb helps as much as 10, even 15MHz higher cpu clocks. 220x11=2.42GHz should easily give you your 20k. getting win2k will do that too. Those are some VERY nice gpu clocks there, its gonna scale well with more cpu power/fsb win2k
    3000+ Venice 240x9=2.16GHz(ondie controller limit) 2x512mb patriot tccd ram
    9700pro at 325/310 runs all games buttery smooth!

    9700(8 pipe softmod, 128m) at 410/325 23821 at 325/310 21287 at 275/270 19159
    9500(4 pipes, 128m) at 420/330 18454 at 275/270 13319
    9500(8 pipe softmod, 64m) at 390/310 19201 at 275/270 16052
    9500(4 pipes, 64m) at 400/310 16215 at 275/270 12560
    3dmark scores with Ti4200 and Ti4800se
    Ti4200 at 340/730 19558 at 300/650 18032 at 275/550 16494 at 250/500 15295
    3dmark scores with older gpus
    Ti500 at 275/620 14588 Ti200 at 260/540 13557 MX440 at 380/680 11551

  11. #11
    c[_]
    Join Date
    Nov 2002
    Location
    Alberta, Canada
    Posts
    18,728
    Odd thing really... I can memtest at 220 but the board just wont get into windows above 203.. ram size and amount has no effect, bios doesnt help either.

    anything more I get from this will be gpu/mem clocks on the card.. not gonna install win2k (dont have it actually) on my main rig just for a bench run...

    All along the watchtower the watchmen watch the eternal return.

  12. #12
    Xtreme Member
    Join Date
    Aug 2004
    Location
    Germany
    Posts
    280
    Nice Score.

    Hitting 19K with my 9700 Non-Pro and XP-M 2600+ was hardest for me so far. I could bench, but Prime 95 had errors.

    Your score with "only" 200 x 12 and RAS-to-CAS 3 is really good.

  13. #13
    c[_]
    Join Date
    Nov 2002
    Location
    Alberta, Canada
    Posts
    18,728
    yeah.. 19k wasnt easy either and I had a bunch more FSB behind me for that too back when my dfi infinity wasnt dead.. 432/345 max clocks on the 9700np when I was benching too, although about 3 hours before it died I had the mem up to 371.. lol.

    I think the drivers have a bunch to do with it

    All along the watchtower the watchmen watch the eternal return.

  14. #14
    Xtreme 3DMark Addict
    Join Date
    Sep 2003
    Posts
    4,225
    well when the time comes and you go a64 along with tccd youll find it too easy to break 20k, heck youd be like 23k I kinda doubt ill have 23k unless this ondie controller is much better than I thought. my gpu clocks is good enough for low 130s in nature, your gpu would give me 23k easy
    3000+ Venice 240x9=2.16GHz(ondie controller limit) 2x512mb patriot tccd ram
    9700pro at 325/310 runs all games buttery smooth!

    9700(8 pipe softmod, 128m) at 410/325 23821 at 325/310 21287 at 275/270 19159
    9500(4 pipes, 128m) at 420/330 18454 at 275/270 13319
    9500(8 pipe softmod, 64m) at 390/310 19201 at 275/270 16052
    9500(4 pipes, 64m) at 400/310 16215 at 275/270 12560
    3dmark scores with Ti4200 and Ti4800se
    Ti4200 at 340/730 19558 at 300/650 18032 at 275/550 16494 at 250/500 15295
    3dmark scores with older gpus
    Ti500 at 275/620 14588 Ti200 at 260/540 13557 MX440 at 380/680 11551

  15. #15
    Registered User
    Join Date
    Jul 2004
    Location
    Sydney
    Posts
    59
    Nice score for the 9700 mate. It makes me wanna stick my old 9500 in my new A64 rig .

    You're gonna need more mhz on the core and more fsb to have a chance at 20k. New cooling time

    edit: wow, just noticed you're putting 1.85v through your core... i was scared to go past 1.75v with a volcano 7+ on it. Mabye that's how your old one died? :P
    Last edited by sandwichamwin; 12-24-2004 at 04:08 AM.

  16. #16
    c[_]
    Join Date
    Nov 2002
    Location
    Alberta, Canada
    Posts
    18,728
    nah, old one died due to heatsink not touching the core... woops

    I've got BH-6, CH-5, and VX all capable.. dont need tccd

    All along the watchtower the watchmen watch the eternal return.

Bookmarks

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •