what temps are u guys reading on rivatuner and others on ur gpus cooled by phase change systems?
what temps are u guys reading on rivatuner and others on ur gpus cooled by phase change systems?
I don't use rivatuner, but the ATI probe with the newer drivers that read temps much higher, I get ~ -1C and 3-4C directly after benching. The evap however shows -96C. I would think it is wayyyy off.
Originally posted by LardArse
I don't use rivatuner, but the ATI probe with the newer drivers that read temps much higher, I get ~ -1C and 3-4C directly after benching. The evap however shows -96C. I would think it is wayyyy off.
Wow!!!! -96C on the GPU Gimme - Gimme
No no nooo give ME.....Originally posted by runmc
Wow!!!! -96C on the GPU Gimme - Gimme
//The Farbror....Has bad English and bad cooling...
Heh isn't it a norm with cascades though?
I have a Vapo XE cooled FX5950u and in windows it locks the temp at zero.
Everytime I look it says "0"
The world`s only triple phase-changer PC in one case.
The best way to check the temperature is thermal probe - it will really show what temps on your GPU, i don't believe temps, which bios tells me.
Duron 800@1120(x140) 2.3v/MSI KT133A Vmod/192MB PC133 CL2/Sapphire Radeon 9550 128MB All Vmods 250/200@533/290
3DMark2003
whoa...cooling to 0?...wat are u cooling with?...i thought gpus ran cooler than cpus...so shouldn't u get even lower temps?
I HAD a Vapo XE on my 9800XT that SHOWED -29C on the display, but in actuality it was around -6C with my Fluke thermal probe.
Time to start building ANOTHER Phase Change Rig!
4930K@5.2GHz/ASUS RIV BE/G-Skill 16GB/4x EVGA GTX 780Ti Classified Kingpin Edition with EK-WB's/4x Rosewill Hercules 1600W PSU's for GPU's/Thermaltake 1200W for MB/Cooling: CPU-Vapo, MB/GPU: A/C Conversion Chiller
Gimme, Gimme 2!Originally posted by runmc
Wow!!!! -96C on the GPU Gimme - Gimme
Mach1, with R134a and a Baker18 GPU turned upside down. Cap tube modded and super tweaked by Bowman and the Display was also calibrated. So .... -47c on the display under a load and - 20c off the back of the card, under the insulation.
Idle is: -48c on display and -31c off the backside of the Vcard.
i was asking cause i dont have a thermal probe and i have a stock prommy st on mah 9800xt, the rivatuner gives me idle temps of 6º and the ati probe never goes below 20º, 30º after benching...
at first i thought i had bad contact but redone it and temps only dropped 1 degree or 2
i think i need to regass it to r404 to be able to do 3dmark2003 at 600 on core
- graphic card: 9800 PRO
- cooling: Kryotech Super G 1000
Evaporator: Kryotech (-50 °C)
Back of the card: -27 °C
Bookmarks