Adjustable Version and High heat load Version
Capillary Tube Version
The infamous tristage
Adjustable Version and High heat load Version
Capillary Tube Version
The infamous tristage
Last edited by chilly1; 04-02-2005 at 01:30 AM.
nice pics chilly!
Last edited by blinky; 05-16-2004 at 09:17 AM.
can you see the light? is it shining too bright? can you see the light at the end of the tunnel, i know i do, i know its true.
Retawi@cox.net my addy.... got anything you need... working ona website
NiceCould you lable the second one with all the parts though?
Phenom II 940 BE / ASUS M4A79 / HD5770 Crossfire
3770mhz CPU 2600mhz NB | DDR1040 5-5-5-15 | 900/1250
If you look at the first picture you can lurk it out what components the second cascade uses. If you don't know what those parts are you obviously shouldn't be into cascades. (bad english)
I'm to lazy
Wth is a subcooler?
Last edited by chilly1; 05-17-2004 at 03:25 PM.
Phenom II 940 BE / ASUS M4A79 / HD5770 Crossfire
3770mhz CPU 2600mhz NB | DDR1040 5-5-5-15 | 900/1250
A subcooler is an HX used for lowering the temperature of the liquidline and raising the temperature of the suctionline in other words cooling the superheated gas/liquid in the liquid line..
Used to make the system more effecient.
I edited the posts for the desuperheater that is actually a device that is connect after the compressor to desuperheat the discharge gas from the compressor..
Last edited by chilly1; 05-17-2004 at 03:27 PM.
I drew these in autocad and colored them in photoshop..Originally posted by blinky
nice pics chilly!
What you are describing is a subcooler. A desuperheater lowers superheat, which this does not. This in fact adds superheat to the suction vapor. The vapor/liquid mixture in the liquid line is subcooled, not superheated.Originally posted by chilly1
A subcooler is an HX used for lowering the temperature of the liquidline and raising the temperature of the suctionline in other words cooling the superheated gas/liquid in the liquid line..
Used to make the system more effecient.
Thx Gary missed the error...
Last edited by chilly1; 09-06-2004 at 06:43 AM.
you guys 0 \/\/ /\/.
Last edited by runmc; 11-03-2007 at 08:02 PM. Reason: language edit
ASCII stupid question, get a stupid ANSII
I think hes half asleep when he writes these sometimes Gary.
Basicly a problem with "smoke"
Imagination is a powerful tool.
?????
He's from the city that never sleeps.I think hes half asleep when he writes these sometimes Gary.
I'm still trying to figure out what a CPEV is. As near as I can tell, it's an AEV.
Last edited by Gary Lloyd; 05-18-2004 at 02:21 AM.
Constant Pressure Expansion Valve Yes it is an Automatic Expansion Valve.
Berlin? :oOriginally posted by Gary Lloyd
He's from the city that never sleeps.
dual ... quad ... hexal ... octal ... hexadecal?
Isn't the CPEV on the evap modified ... seems I read that in a very early post.Originally posted by chilly1
Constant Pressure Expansion Valve Yes it is an Automatic Expansion Valve.
Only the settings are changed the device remains the same... O teah the internal is set a little different I lower the sprinc tention a half anotch..Originally posted by Hobocrow
Isn't the CPEV on the evap modified ... seems I read that in a very early post.
Ya the strangeness has something to do with all the flashing lights and noisy buzzers, I think. Either that or Fugger keeps him up all night wanting to see that Ultimate O/C.He's from the city that never sleeps.
Imagination is a powerful tool.
They say it's the heat ... working on rooftops for the last nine years in the summers and temps around 140 with the rubber of your sneakers melting away in two weeks or less...
If only we could all be so lucky...I feel for you guys down there.
140F... Do you guys get alot of blow offs from pressure reliefs or by passes opening up?
I'd be afraid to even carry around refrigerant jugs. I've seen an old boss of mine do that.. /rolls eyes.
Imagination is a powerful tool.
Chilly1, hehe ... I just knew that cpev on the evap was tweaked!
I used to be very afraid. The iside of the van parked could reach 150F But never a one... Some guys who over charge the recovery tanks get a blow off or two. and you hear of someone not tying their tank down and it blew in the truck but not much...Mostly wear out shoes and drink way too much water ten 2 liter bottles a day plus what I drink at home.. At a minimum... We get a hugh number of burned out condenser fan motors with this heat they operate about 10 degrees above their maximum temperature. Even the new R410 systems dont have trouble.. The head is a little high at 550 psi discharge, but it appears to work ok.. So this is for all the worriers about cascades out there the cascade systems we build the head pressure seldom exceeds 300psi...Originally posted by Redwolf
If only we could all be so lucky...
140F... Do you guys get alot of blow offs from pressure reliefs or by passes opening up?
I'd be afraid to even carry around refrigerant jugs. I've seen an old boss of mine do that.. /rolls eyes.
Nice, so with this system you can run 24/7 at around -50 and them drop it to -100 for benchmarking?
AMD FX-57, ATi EXPRESS 200 Motherboard, 1GB TCCD, 74GB Raptors in 0-Raid, RADEON X850 XT Platinum PCI Express, Logitech Z-5500 Speakers, Samsung 191T+
Phase-Cooling
Not really if you build a chiler that is an option. with phase change a Temp range of -70 to -100 is possiable. Fractional HP compressors don't have unloaders..
Ok, but is -70 ok to run 24/7 and safe
AMD FX-57, ATi EXPRESS 200 Motherboard, 1GB TCCD, 74GB Raptors in 0-Raid, RADEON X850 XT Platinum PCI Express, Logitech Z-5500 Speakers, Samsung 191T+
Phase-Cooling
Posting Permissions
Reply With Quote
Bookmarks