Water Cooled Case Gallery

[3Tripnip]

Here's mine. I just finished it swapping out parts on Sunday... so please bear with the cable mess. I'll get to that soon. Anyway, here's mine:





My custom designed/machined reservior and mounting bracket



My custom shroud with 3 Nexus 120mm fans.

[en4cer]

/\

That looks NICE, I like the red water

[Gimmpy224]

what rad is that?

[3Tripnip]

what rad is that?

It's a Black Ice Pro III

[Gimmpy224]

what kinda temps u gettin with that?

im not sure if i should buy one next when I go to cool my gpu or if i should buy another 77 bonne

[3Tripnip]

what kinda temps u gettin with that?

im not sure if i should buy one next when I go to cool my gpu or if i should buy another 77 bonne

If you can find one, I'd go for it. I'm looking at temps around 26-28 idle, and I've seen maybe 35 under load right after some Doom 3. Awesome rad... best I've ever used. I'd definately mod it to have a larger shroud though. It seemed to really help my system.

Thanks for the kind words!

[mindwreck]

did you make that shroud? I've been looking for one for my BIP3 and haven't found one that looked like that

[Master_G]

What is the chipset heatsink you are using 3Tripnip?

G

[3Tripnip]

It's the Swiftech MCX159-CU. I found it for sale online without the included fan so it made it a few bucks cheaper. It's performing great so far.

[Andrew]

How about an old dual Athlon MP using old Gemini Cool Spirals? Used as a SQL server running 24/7 for almost 2 years. Finally replaced the Mag3 with a DC pump.

[vkbms]

How about an old dual Athlon MP using old Gemini Cool Spirals? Used as a SQL server running 24/7 for almost 2 years. Finally replaced the Mag3 with a DC pump.

fantastic!

[FourDoors]

bedda madre

[Flib]

Looks nice Andrews but the colour of the water is

[Jupiler]

I finally got on to it and installed a second Wc rig.
Had the heatercore laying around for 2 months without using it, same for the D5 pump, which I got as a replacement from DD after my D4 died.
So I ordered the NexXos XP bold S775 block a couple of weeks ago and started installing it.

Components :
NexXos XP Bold S775 block
Maze4 GPU block
DD D5 pump
Weapon Heatercore with shroud and 2*120mm San Ace fans.
Coolplex 25 reservoir
1/2" Masterkleer tubing.

Board is ASUS P5WD2 Prem, 630 @ 4450Mhz, X800GTO @ X800XT, 2*512 MB PC6400 OCZ EB, Enermax Liberty 500W PSU, 80Gb Hitachi SATA

The rig is not 100% finished. I need to finalize cabling and stuff.

[wildc4rd]

Minor update on mine, now got 2 cards to play with, lol.

[ghent915]

Wild...
You MIGHT want to shorten the run between one of your D5's and your GPU. That just seems a wee bit overkill to me. With the sleeving you have on your lines, you should be perfectly fine with a more direct run.

Just my $0.02
-Ghent

[ferrari_freak]

Wild...
You MIGHT want to shorten the run between one of your D5's and your GPU. That just seems a wee bit overkill to me. With the sleeving you have on your lines, you should be perfectly fine with a more direct run.

Just my $0.02
-Ghent

Agreed.

3TripNip, that is awesome . I'm hoping to have a WC along the lines of that one if I ever go liquid.

Usama aka Ferrari Freak

[Andrew]

Looks nice Andrews but the colour of the water is

LOL That is not the water. That is the wonderful staining power of WaterWetter. I no longer use it but the stain has held on.

[wildc4rd]

Wild...
You MIGHT want to shorten the run between one of your D5's and your GPU. That just seems a wee bit overkill to me. With the sleeving you have on your lines, you should be perfectly fine with a more direct run.

Just my $0.02
-Ghent

I did try a more direct route, but it was putting quite a bit of stress on the card. The tube has the wire moulded into it, which is great for lack of kinks, but can be a bugger to bend. Am getting 35 and 39 degrees load temp at about 23 ambient on GPU 1 and GPU 2, so am pretty happy. The CPU has its own loop as well, so is not affected.

[LenniZ]

Minor update on mine, now got 2 cards to play with, lol.

[/IMG]http://img.photobucket.com/albums/v340/LV38_Eagle/forum%20stuff/DSC00495.jpg[/IMG]

Nice, do you have a bigger picture?

[Unoid]

Heres pics from my latest project: Worklog at here: http://www.hardforum.com/showthread.php?t=983644





I can't really oc my athlon 2400 mobile barton any higher (maxing vcore on my dfi infinity nf2 alrdy) but my temps has dropped dramaticly comapred to my eheim1250,BI pro single 120mm setup on maze4 cpu block. Also all my fans on lowest speed gets the same temps as when i have the fans going full blast, that obviously shows I not even comming close to taxing my radiators cooling ability yet

When I upgrade my rig in hte spring/.summer to M2 and g80 or r600or r580 I'll go with a nice hot dual core M2 .65nm processor and hopefully TEC cool it, as well as the vid card, then i'll start using my rad's ability.

[mindwreck]

wow.. thats one damn nice looking box unoid

[Unoid]

Appreciate it

[Korpse]

If I had WCing, Id prefer a box like that Sit under my Lian Li Phase Change stylee

[Nettwerk]

saw your project on hardocp, Unoid. Looks awesome