Mounted a GPU block, what is your opinion on this?
I need a nother rad, thinking about a single BIP, need it to cool down the warm water from the cpu, gpu is not cold enough :/
Mounted a GPU block, what is your opinion on this?
I need a nother rad, thinking about a single BIP, need it to cool down the warm water from the cpu, gpu is not cold enough :/
Opteron170/X1900XT/OCZVX: 42128 3d01se - 22447 3d03 - 14037 3d05
Main:
Gigabyte P35 DS4 Rev 2.1
Core 2 Q6600 @ 3.81 Ghz, 1,45v
4x2GB Kingston HyperX PC-6400 LL
Powercolor HD5870 LCS Edition, EK Fullcover block shizle
2x Intel X25-M 80GB Gen2, RAID0
Asus Xonar D2X
Looking real good LenniZ what pump are u using?
I think u should remove the 90 degree elbow fittings. They will make your waterflow more restrictive.
Btw. is the rad able to "breath", I mean have u cutted the bottom of your case?
System #1: DFI nF4 Ultra-D/SLI mod || Athlon 64 X2 3800+ 2.85g w/Storm || Swiftech H20-Apex Watercooled
--------------SLI EVGA 7800GT 590/1280 w/ MCW55 & MC14's || Gskill PC4000 (2x1gig) || SB Audigy 2 ZS
--------------WD 10,000rpm 74gig Raptor -=- WD 250 16mb SATAII || Asus 16x DVD - E616P2 -=- NEC 16xDVD-RW ND3520A
--------------PSU OCZ 520w Powerstream || ThermalRock Circle || Dell 2005FPW 20.1" Widescreen || CPU-Z Verified
System #2: MSI Neo 2 Plat || Athlon 64 3200 Winchester 2.5g w/Freezer 64 Pro || Gskill PC4400 (2x512)
--------------ATI X800 XT PE w/ Silencer 4 || WD Caviar 120G DH || DVD & DVD-R/Rw Drives
--------------PSU ASPIRE 520W || Kingwin Aluminum Case || Hyundai L90D+ 8ms LCD
those are some tiny tubes m8, 1/4?
Originally Posted by freecableguyCheck out my forum: http://www.anarchyst-it.comOriginally Posted by Xeon th MG Pony
yep those are 1/4 or 3/8 looks like he's using the TT bigwater
when i get my new case, and get evthing fiting on the inside of it, i'll post pics but untill then .... noone get's to see my wonderful set up xD
emptiness
Yeah, its 1/4" tubing, and yes, its a Bigwater SE. And it cost a fraction of the price a custom setup would of cost me.
maybe, but custom would give much better temps
Originally Posted by freecableguyCheck out my forum: http://www.anarchyst-it.comOriginally Posted by Xeon th MG Pony
My temperature today, was flickering from 27*C to 28*C and after half an hour of playing battlefield 2 the peak the temperature graph hit was 32*C. My friend spent £150 on his water cooling, and he gets 25*C on idle. Considering he spent 1.5 times more than me (I spent £60 on mine.) I don't see this as a good enough temperature difference.
(my CPU hits mid 50's on load when I had air cooling.)
sorry but the line + teh image = (but everyone note NO 90 degree ANGLES )Originally Posted by LexDiamonds
I spent 200 USD (80-90 euros??) on my custom set up, and am getting temps of 33C/46C in a warm room, approx 77-78 FOriginally Posted by trifid
so yea, ur friend definantly spent too much
anyways guys, i need a big, roomy case so i can fit my W/C set up INSIDE instead of having the rad and pump laying on teh floor outside of my case, any suggestions?
Last edited by trance565; 11-07-2005 at 07:59 AM.
emptiness
200 USD are something like 200.00 USD = 169.514 EUR
oh, used to be like 2.3 euros ... or something per usd wait... no that was pounds
emptiness
Ok. Here's my case at the moment:
and little detail on the window:
All stuff are in case. And of course silence is gold
This all get's updated asap I'll get that X1800 XT
Last edited by RistoEe; 11-07-2005 at 12:23 PM.
Desktop: SuperPi 8m: 6m 43s
Motherboard:DFI LanParty UT RDX200CF-DR
Processor:AMD64 3000+ (Venice) @ 2250 MHz
Memory:Mushkin Redline dual-kit PC4000
Graphic:Club3D X1800 XT 512
Power:BeQuiet 470W
Cooling:Hydro Seltz L20 O4P-SE, Zalman ZM-WB3 Gold CPU , Zalman ZM-GWB2 VGA, Evo 240 and Innovatek Tank-O-Matic
you do that etch yourself?
Originally Posted by freecableguyCheck out my forum: http://www.anarchyst-it.comOriginally Posted by Xeon th MG Pony
Finished my other w/c box today
Yeap... with dremelOriginally Posted by Gimmpy224
Desktop: SuperPi 8m: 6m 43s
Motherboard:DFI LanParty UT RDX200CF-DR
Processor:AMD64 3000+ (Venice) @ 2250 MHz
Memory:Mushkin Redline dual-kit PC4000
Graphic:Club3D X1800 XT 512
Power:BeQuiet 470W
Cooling:Hydro Seltz L20 O4P-SE, Zalman ZM-WB3 Gold CPU , Zalman ZM-GWB2 VGA, Evo 240 and Innovatek Tank-O-Matic
STORM and peltier is a very bad solution!Originally Posted by beermanpro
STORM is only cooling a small spot but intensively... A peltier needs cooling covering all its surface... A Swiftech 6000 or an old DD Maze4 would work much better!
/Thomas
heres mine
I modded a zalman "reserator". Alot of people have negative reviews about this passive watercooling. I got the kit for free, and the first day i removed the crappy stock pump and replaced it with an ehiem 1050 pump. My idle temps are 32c with load temps at 40c, with my x2 4200+ oc'ed from 2.2ghz to 2.65ghz. Actually a really good solution, since its completly quiet. Absolutely not worth the money, but considerign what i spent on it, its just as good as most active watercooling solutions.
pics:
never realized the reserator was THAT big
emptiness
Awesome case! Makes me want to mod the #$(*%# outta my U2-UFO. Got any more pictures?Originally Posted by wildc4rd
Yan Booth
PS- Check your PM's!
i7
Dell 30" 2560x1600
Hi YanBooth, I did get your PM, but don't have many other pics, the one I have from my clear HD mod, and a shot of the rads, will get a few more over the weekend if you want them. All the cutting of the panels was done with a jigsaw and tidied up with a Dremel by me, no 'company' worked on it, and yes, that is the plain brushed ally case.
These are the only other photos I have, drop me a PM if you want any more.
Wow, the HD mod looks cool.Originally Posted by wildc4rd
I have another question or two.
Firstly, when you cut the fan holes, did you use the jigsaw? Secondly, how did you attach the acrylic to the case? And the black foamy, rubbery stuff, like this: http://www.crazypc.com/Merchant2/mer...uct_Code=83010 or this http://www.crazypc.com/Merchant2/mer...duct_Code=8302 ???
Thanks a lot, very helpful and insightful.
Yan
PS- if you have the camera out... more pics would be cool... but not pressure mate.
i7
Dell 30" 2560x1600
wasn't sure where to stick this so if yr a mod and its in wrong section move it please
Here is another pc-70 to add to this gallery, personally i think mine is the best (reason : its mine lol ), phil did this for me in a one off colour well, put it this way he has never anodised a red and then had it polished to this standard, the colour is what you would refer to as blood red and really is stunning in the flesh (but doesn't that apply to any thing?)
Here is a pic took of it before he shipped it
^^ there she is all ready to be shipped
Please note these are really shoddy pics and dont do it any justice, i need to take some in natural day light rarther than using the flash of the camera.
Temps wise im sitting at 26 - 27°c idle to 40°c load, ambient is 20°c (load tested using S&M which loads cpu more than any other program) but adverage load using bf2 which loads cpu and gpu is 36°c which aint bad considering all fans are 7v and produce very little noise considering, id say about 25db if that!!! Which aint bad at all, temps to noise ratio is very good considering!!
W/cin parts are.....
Pa 120.3 + 3 7 volted panaflo m1's
Cathars G5
Danger Den's Chrome Maze 4
Danger Den Dual floppy bay res
7ft of 7/16th tubing
Hopefully at i26 ill get loads of attention....
If you need any more ill stick em up, but ill replace them ones with some better ones 2morrow taken in the day light .
The psu is a biatch to try and wire, in that case as its posistion its quite hard to hide wires.
There is still more work to do, i was hoping to get my uv dye today but no luck from coolercases (been waiting 3 days for it now - naff service if u ask me), iv still got some wire braiding to do as well as get the bulgin lit up although im mot sure which pins go where lol, also got to get some new ide cable and sata cables
Phil
Wow, that case color is amazing, did you do that yourself?
Yan
i7
Dell 30" 2560x1600
Bookmarks