my very old rig.. new one is almost finished. this one is completely watercooled - including the psu.
http://mitglied.lycos.de/mnaumer/wak...tagedetail.jpg
http://mitglied.lycos.de/mnaumer/wak.../frontradi.jpg
http://mitglied.lycos.de/mnaumer/wak...uebersicht.jpg
My Tea-Kwon-do teacher told me: Your arms and legs, your head, knees and your feet are dangerous weapons, because of that, be careful, I am armed and dangerous!
you need cable sleeving dude, its a mess!!Originally posted by fuqqa
a picture
what rad do you have?T hat waterblock looks nice, but its a bit restrictive right?(innit the cuplex evo sumthing?)
mmmm that's.................. sick!!!!!!! cot damn, innit loud or all the fans runnin @low rpm. Maybe you should run tecs in there, cos that radiator is overkill, i love itOriginally posted by NikolauZi
my very old rig.. new one is almost finished. this one is completely watercooled - including the psu.
http://mitglied.lycos.de/mnaumer/wak...tagedetail.jpg
http://mitglied.lycos.de/mnaumer/wak.../frontradi.jpg
http://mitglied.lycos.de/mnaumer/wak...uebersicht.jpg
Last edited by h0ok3r; 06-01-2004 at 05:34 AM.
all 120mm fans can be turned off (and are usually turned off). the 172mm fans in the middle are 24v fans @ 12v - so they are supersilent. so the loudest thing are the two hdds ;-)
niggo
My Tea-Kwon-do teacher told me: Your arms and legs, your head, knees and your feet are dangerous weapons, because of that, be careful, I am armed and dangerous!
Here's my radiator, made of 50' of 3/4" copper pipe:
The hole for the radiator has plastic so I can keep the ground wet to increase heat transfer.
Iwaki 20RZ.
The water is 10-15C. To prevent condensation without insulating, I sealed up the case so no air comes in or goes out. The air is recirculated inside and cooled by the heatercore, which of course has the cold water going through it.
Rest of the pics.
Last edited by pelikan; 02-24-2005 at 09:59 PM.
Come on.... this is unbelievable !!!
hahahahahhaahahhahaha
p35 Pro
q6600
2x 1GB Ballistix 8500
eVGA 8800 GTX Superclocked
hahahaha omg that is amazing
lol, i've seen peopel do that sort of thing, some dude did one in his garage underneath a big shelf. you must have a huge pump for that huh?
Yeah, I was using a Grundfos circulator pump that has 25' of head and 1250 gph, but it used 185W and I got sick of paying for it on my electric bill. So I just bought an Iwaki 20RZ. It uses about 55W and still has 22' of head. It's working great.
outside the box.................
{2012 27imac-3.4i7-680mx-32gb ram-768SSD+External TB Samsung840pro ssd + TB velociraptors-Moto828mkIII/Marantz/Amphion Sound-HPzR30w 2nd monitor}
.........and inside the box
{2012 27imac-3.4i7-680mx-32gb ram-768SSD+External TB Samsung840pro ssd + TB velociraptors-Moto828mkIII/Marantz/Amphion Sound-HPzR30w 2nd monitor}
here's mine:
was like this in the beginning:
ended but not finished here:
Conroe E4300 + Asus P5PE-VM + Geil 2GB 6-3-3-2.5 DDR 400 + Seagate 160GB HDD + ATi X1950 PRO + Creative Audigy 2 ZS + SCORPIO LC6480S 480W Free-Plug
www.madtech.com.pt
off my TREO phone so forgive the not so clear images. ***dreams of a 2 megapixel phone that japan currently uses***
Last edited by iboomalot; 10-21-2005 at 07:45 PM.
i7 6700K @4.8 ghz
XSPC RayStorm (very nice block)
Z170 Sabertooh ,, 32GB- Gskill (15-15-15-36 @3600 mhz) 1:1
XFX-7970 with Swiftech Komodo nickel block
Water Cooling - MO-RA3 Pro with 4 Silverstone 180mm @ 700 rpm, Twin Vario mcp-655 pumps
Samsung 850-1TB SSD,, OCZ ZX-1250W (powerfull and silent)
Crossfire 30" decent monitor for IPS too bad SED tech died
Docsis2.0
Docsis3.0
-- People who reject the idea that "government has a responsibility to reduce income inequality" give an average of four times more than people who accept that proposition.
wow those are some beautifull cases you guys!
(except for fuggas)
here is mine.....
wow, all these cases and loops are giving me ideas! i got a BIX2, TDX, maze4 gpu and NB blocks i need to pick up at the post office before i can get done to some real business. hopefully soon my pics will be up here. Godd work guys!
Specs
Asus 780i Striker II Formula
Intel E8400 Wolfdale @ 4050Mhz
2x2GB OCZ Platinum @ 1200Mhz 5-4-3-18
MSI 5850 1000Mhz/5000Mhz
Wester Digital Black 2TB
Antec Quatro 850W
Cooling
Swiftech Apogee
Swiftech MCP-600
HardwareLabes Black Ice Extreme 2
Audio Setup
X-fi w/AD8066, Clock mod, & polymer caps > PPAV2 > Grado SR60 & Grado SR325i & Beyerdynamic DT770 Pro & Beyerdynamic DT990 & AKG K701 & Denon D2000
I gotta post my setup soon. All the setups here have been looking good. My one is a mess, it kinda looks like my hair which is a mess too. As they say, the pet (in this case, my computer) resembles his master. LOL.
looking Jethro.
is the loop going through cesspit or something
if u notice the new hose i installed the fluid is perfectly clear its the hose that discolors over time. Also look at my bayres. 95% distilled water maybe 5% DEXCOOL orange coolant. Its clearflex hose perhaps i need to get tygon?> temps are great and blocks and rad hold up extremely well so i dont mind much.
ASROCK 970 Extreme 3 // FX-6200 @ 4.65 (245x? 64bit os) 1.45v,2200 nb/HT //8GB Mushkin DDR3 @833 8-8-8-24 cmd1 1.55v // HD7850// Silverstone 650w // ~32inch portal // WDgreen and blue // Kingston v300 120GB SSD // watercooled with Swiftech storm rev2, Fez 240 , 655 pump not packed into a Corsair Obsidian 650D///
chenbro xpider very small sized case, had to plan a lot to fit everything in here.
here is my casemod to fit the HC and how tight it is in the case.
here is the finish, 16 C drop at full load compared to the thermalright and zalman 7000 heatsinks I tried. And basically the same loudness, nearly silent, can kind of hear the DD D4 pump, but the panaflo 120mm M fan is turned down a little. =)
Last edited by travanx; 08-22-2004 at 09:04 AM.
heres my rig...
cables are a mess
Last edited by ocmyface; 08-24-2004 at 07:05 PM.
heres my prize trophy
cathar white water - #20 in production
EDIT: oh yeah, my digicam sucks btw
Last edited by proxg; 11-12-2004 at 02:50 PM.
here's mine heh
http://www.fileshosts.com/watercooling/DIY/6002_MCP650/
---
Here is my Rig. The specs are in my sig. I dont have much in the way of external pics as there is no point because i run withouth case panels at the moment. Besides they are boring white case panels.
the system is so celan looking becasue i only have one hd connected (usually 2 SATA drives) and only one cd drive connected. All of hte PSU cables are hanging out hte back of the computer at the moment. When i get my new parts i will fix it all up.
And the pics
Posting Permissions
Bookmarks