Yeah, I know
The stupid EK waterblock did not fitted perfectly on my x1950xtx. The screws were too short, so I had to use/make some custom screws. When I noticed the bended PCB I was prepared for the worst, but hey, it's still working. But maybe I will try loosen it up (if the screw is not too short).
Somehow my videocards always bend after adding custom cooling (you should had seen my 9800pro with zalman heatsink + fan).
PCB are quite strong, so I'm not afraid, and even if it fails, it's only a good excuse to buy a 2900xt
Thanks =) Opteron 290's, 4Gb RAM, XFX 7950GT Extreme SLi, X-Fi Platinum, 2x74Gb Raptors RAID 0, 1 TB storage, PVR 500 & other stuff
Thanks for the great compliment =) Cost? I wasn't keeping track.. *cough*
Thanks =)
Thanks and of course I Fold =). See Below.
That is correct. See below.
Hm.. close but not quite. Here they are..
Last edited by Dark Prodigy; 07-26-2007 at 12:19 PM.
[SIGPIC][/SIGPIC]
....forgive me Father..
These Flowblocks looks very cute
750W Thermaltake Modular PSU
DFI UT X58-T3eH8
Core i7 920 @ 20 X 200 1.325V
CORSAIR XMS3 DHX 4GB (2 x 2GB) DDR3 1600
768 MB EVGA 8800GTX
1 X 36GB WD Raptor
2 X 150GB WD RAPTORS
1 X SpinPoint P Series SP2504C 250GB
1 X Maxtor 6L300S0 300GB
16 X NEC DVD Burner
7 120mm Yate Loon LED Intake Fan
4 120MM Yate Loon Exhaust Fan
28" HANNSPREE Monitor
Watercooling Loop:
1 X PA120.3
1 X PA120.2
2 X Laing DDC's w/EK-DDC Dual Turbo Top
7 X Yate Loon Blue LED Intake Fans
4 X Yate Loon Blue LED Exhaust Fans
1 X Swiftech GTZ
1 X GPU EK Fullcover Waterblock
1 X XSPC Dual Bay Reservoir 5.25" with Bubble Window
Last edited by msgclb; 07-27-2007 at 02:40 AM.
| Intel Core i7-2600K | ASRock P67 EXTREME4 GEN3 | G.SKILL Sniper Series 8GB (2 x 4GB) DDR3 1866 | EVGA GTS 450 |
| Swiftech APOGEE Drive II CPU Waterblock with Integrated Pump | XSPC RX360 | Swiftech MCP655-B Pump | XSPC Dual 5.25in. Bay Reservoir |
| Thermaltake 850W PSU | NZXT SWITCH 810 | Windows 7 64-bit |
[SIGPIC][/SIGPIC]
Har Har i like it too But now i managet those cables for a better look. And grinch thanks for your ice cold beer i really enjoyed it My case getting dirty but i installed some Dust Guards in the bottom, maybe this should help.
Last edited by BeeN; 07-27-2007 at 02:16 AM.
wow BeeN thats some awesome wire management..
Evga X58 sli under cascade
http://www.xtremesystems.org/forums/...d.php?t=219788
Evga X58 Sli ultimate overclocking/ overview/ discussion thread
http://www.xtremesystems.org/forums/...d.php?t=221082
proud owner of E8600 Q822A435
Sound: Asus Essense ST | Wharfedale Diamond 9.1 | Norge 2060 Stereo amp | Wharfedale SW150 sub (coming soon)
Camera Gear: Canon 6D | Canon 500D | Canon 17-40L | Canon 24-105L | Canon 50mm f1.4 | Canon 85mm f1.8 | Rokinon 14mm f2.8 | Sigma 10-20EX HSM | Benro A3580F + Vanguard SBH250 | Bag full of filters and stuff
• - Asus P8Z68-V PRO
• - Intel I5 2500k @ 4.5Ghz (for now)
• - Asus Geforce 580GTX DirectCUII Fermi
• - 16GB Corsair Vengeance Low Profile
• - Ultra X3 1000 Watt
• - Asus Xonar DX 7.1 \ Klipsch Promedia 2.1 THX
• - Corsair Vengeance 1300 Gaming Headset
• - Crucial M4 SSD 128GB \ WD Caviar Black 1TB
• - CoolerMaster 690II Advanced
• - Dell UltraSharp 24''
• - Noctua NH-D14
January - SLI Rig Of The Month (2008)
Sound: Asus Essense ST | Wharfedale Diamond 9.1 | Norge 2060 Stereo amp | Wharfedale SW150 sub (coming soon)
Camera Gear: Canon 6D | Canon 500D | Canon 17-40L | Canon 24-105L | Canon 50mm f1.4 | Canon 85mm f1.8 | Rokinon 14mm f2.8 | Sigma 10-20EX HSM | Benro A3580F + Vanguard SBH250 | Bag full of filters and stuff
we just finished this one, QuietOnes 3000, 780 Gph, to see more pictures http://www.customsssolutions.com
I like the green.
What pump and rad is in there?
The Cardboard Master Crunch with us, the XS WCG team
Intel Core i7 2600k @ 4.5GHz, 16GB DDR3-1600, Radeon 7950 @ 1000/1250, Win 10 Pro x64
Its a QuietOnes 3000, 1"NPT fittings 780gph 10.5 ft head, radiator has dual 120mm Coolermaster fans in custom stainless body http://www.customsssolutions.com to some better pictures of it
DFI ICFX3200 07/30 w/ MCW30
E6600 L632A407 w/ EK Supreme
Powercolor HD3870 w/ MCW60
OCZ Reaper 2x2GB CAS4
WD Caviar Black 1TB
Silverstone Strider 750W
MM U2-UFO Extended CYO
CPU & NB loop = PA120.3, DDC 18W w/ Petra's top, 7/16''
VGA loop = PA120.2, DDC 18W w/ Petra's top, 7/16''
10 fans on 7V, PX-750A, all on SM 930BF
" Having a DFI board is like having a hot girlfriend thats a total b1tch" ...
DFI ICFX3200 07/30 w/ MCW30
E6600 L632A407 w/ EK Supreme
Powercolor HD3870 w/ MCW60
OCZ Reaper 2x2GB CAS4
WD Caviar Black 1TB
Silverstone Strider 750W
MM U2-UFO Extended CYO
CPU & NB loop = PA120.3, DDC 18W w/ Petra's top, 7/16''
VGA loop = PA120.2, DDC 18W w/ Petra's top, 7/16''
10 fans on 7V, PX-750A, all on SM 930BF
" Having a DFI board is like having a hot girlfriend thats a total b1tch" ...
steffan...OMG the german rigs at effizienzgurus.de watercoolign section are just amazing; yours and xbox's.
cable ties holding fans onto ram ftw!!
There are so many sick rigs here, it is a wonderful and inspiring thread. Here is my hoopty rig.
Current config:
e6600 (soon to be q6600 G0)
p5n32-e
2 x 2gb Mushkin pc6400
Evga 8800 GTX
Netcell 3-port RAID card
Dvico HD TV tuner
150gb RaptorX (sys - Vista)
3 x 74 GB Raptors (apps - Netcell RAID)
Maxtor 200gb (Unbuntu + XP)
Seagate 250gb (PCLinuxOS)
WD 400gb (data)
Seagate 500gb (media)
Temjin tj07
Swiftech cp350
TDX (being replaced with an Apogee GTX)
Koolance vr block
Corsair nb
DD res
Swiftech dual 120mm 676 rad (old model but thin and has adjustable fittings)
Aqua computer single 120mm rad
and I think that's it. Here are some pics:
Can you find the iPhone in the picture? :-)
The whirlwind mess I make when building:
It is not fully done yet. Obviously I have to change the cpu block to accommodate the q6600 thermals, and might play around with some rad/fan configs. Also, I have to mod the upper hd cage in the 5.25" bays, and mod the bay covers. I have painted covers but will probably end up using LL perforated covers. Additionally, I might change the stock top exhaust grill to an AC Ryan or Aqua computer one.
I had 4 rigs, but now only have 1 and 2 Macs to streamline my setups since I can only give all my systems so much time each. But there is a need to build a second rig, and I am getting new ideas and amassing extra parts so it is high time that I start building. I'll post it when I am done. Hope you guys like it.
Last edited by FlimFlam00; 07-29-2007 at 10:29 PM.
Bookmarks