Water Cooled Case Gallery

**~~septim~~** · 06-02-2007, 02:09 AM

malik thats a broken link i think...

**Malik** · 06-02-2007, 03:40 AM

Originally Posted by septim

malik thats a broken link i think...

Now is ok

**InsaneOne** · 06-02-2007, 04:33 AM

and now my new system in a case

http://jannheik.daug.net/kuvat/tietokoneeni_28_5_2007/

**2k7zero** · 06-02-2007, 04:37 PM

Originally Posted by bundymania

A bunch of pics from various rigs.....

....greetings to ya all from the sunny side of germany

Is that a pc-7b? Could u show me better pictures inside and out in daylight, what rad are u using, and the space between the rad and psu if possible? Thank You.

**USFORCES** · 06-02-2007, 04:47 PM

**Exedy** · 06-02-2007, 08:24 PM

Lol :d

**Yozzman** · 06-03-2007, 01:24 AM

Originally Posted by USFORCES

I'd like to see more pics

Rad, Res and pump

**KAMILcom** · 06-03-2007, 03:34 AM

MY LC

**LethalSmite** · 06-03-2007, 08:42 AM

Originally Posted by OCFX

Lol :d

OMG ALIENINVASION

**barzi** · 06-03-2007, 10:04 AM

Originally Posted by KAMILcom

MY LC

I see you have the same case as me. But what kind of setup do you have?(proc and GPU)
And you only have a BIP I right? Is this enough for your cpu + chipset + gpu?
I want to cool my e6600(cpu only) with a BIP, and i want to know if it will perform better or worse then a tuniq tower or something.

**KAMILcom** · 06-03-2007, 01:22 PM

Originally Posted by barzi

I see you have the same case as me. But what kind of setup do you have?(proc and GPU)
And you only have a BIP I right? Is this enough for your cpu + chipset + gpu?
I want to cool my e6600(cpu only) with a BIP, and i want to know if it will perform better or worse then a tuniq tower or something.

hi
my config:
Intel Core 2 Duo E6300 @ 3.6 Ghz 1.4v 24/7 (ambient 22*C now is to hot)
Asus P5B Deluxe WIFI sb @ NB47J
Geil Ultra 2x1Gb
Samsung Spin point® 200Gb S-ATA ll 8Mb 7200 RPM
Galaxy GeForce 7900GS 256MB DDR3 1,2ns Zalman Edition
Leadtek WinFast TV 2000XP Expert
Creative SB Audigy 2 & Sennheiser HD 202 & Logitech X-530
Anteck Plusview II @Maty BeQuiet
topower P6 530w

yes it's BIP becouse i buy all parts very cheap 300zł (~80$) CPU GPU NB bloks, radiator, rubber tubes (used), pump only fans are maine

cpu 3200mhz @1.1v
ambient 30-32°C fans@12v
CPU 50/60-62 ilde/stress
GPU 50/60 ilde/stress
fans @5v (only night)
CPU 60 ilde
GPU 60 ilde

with air-conditioning ambient 22°C
fans@12v
CPU 40/52 ilde/stress
GPU 42/50 ilde/stress

this cooling ran one month, now i have more money and i will buy 2x120mm radiator this week

with ninija and fan @5v temps was under 70*C

sorry for my bad English

**buffbiff21** · 06-03-2007, 01:37 PM

Originally Posted by ranker

You are my idol Bundy. I love your builds, your work, and the attention to detail you put in. Not to mention, you're one of the few sane German's that doesn't swear by 1/4" tubing.

Hey! I'm German and I used 1/2 tube.

**barzi** · 06-03-2007, 01:41 PM

Originally Posted by KAMILcom

hi
my config:
Intel Core 2 Duo E6300 @ 3.6 Ghz 1.4v 24/7 (ambient 22*C now is to hot)
Asus P5B Deluxe WIFI sb @ NB47J
Geil Ultra 2x1Gb
Samsung Spin point® 200Gb S-ATA ll 8Mb 7200 RPM
Galaxy GeForce 7900GS 256MB DDR3 1,2ns Zalman Edition
Leadtek WinFast TV 2000XP Expert
Creative SB Audigy 2 & Sennheiser HD 202 & Logitech X-530
Anteck Plusview II @Maty BeQuiet
topower P6 530w

yes it's BIP becouse i buy all parts very cheap 300zł (~80$) CPU GPU NB bloks, radiator, rubber tubes (used), pump only fans are maine

cpu 3200mhz @1.1v
ambient 30-32°C fans@12v
CPU 50/60-62 ilde/stress
GPU 50/60 ilde/stress
fans @5v (only night)
CPU 60 ilde
GPU 60 ilde

with air-conditioning ambient 22°C
fans@12v
CPU 40/52 ilde/stress
GPU 42/50 ilde/stress

this cooling ran one month, now i have more money and i will buy 2x120mm radiator this week

with ninija and fan @5v temps was under 70*C

sorry for my bad English

Thank you very much

Think does temps are quite nice, because you have a GPU and CPU in your loop, and it's still cooler then your scythe ninja..
I will get my setup soon.

**manu** · 06-03-2007, 04:23 PM

Originally Posted by KAMILcom

hi
my config:
Intel Core 2 Duo E6300 @ 3.6 Ghz 1.4v 24/7 (ambient 22*C now is to hot)
Asus P5B Deluxe WIFI sb @ NB47J
Geil Ultra 2x1Gb
Samsung Spin point® 200Gb S-ATA ll 8Mb 7200 RPM
Galaxy GeForce 7900GS 256MB DDR3 1,2ns Zalman Edition
Leadtek WinFast TV 2000XP Expert
Creative SB Audigy 2 & Sennheiser HD 202 & Logitech X-530
Anteck Plusview II @Maty BeQuiet
topower P6 530w

yes it's BIP becouse i buy all parts very cheap 300zł (~80$) CPU GPU NB bloks, radiator, rubber tubes (used), pump only fans are maine

cpu 3200mhz @1.1v
ambient 30-32°C fans@12v
CPU 50/60-62 ilde/stress
GPU 50/60 ilde/stress
fans @5v (only night)
CPU 60 ilde
GPU 60 ilde

with air-conditioning ambient 22°C
fans@12v
CPU 40/52 ilde/stress
GPU 42/50 ilde/stress

this cooling ran one month, now i have more money and i will buy 2x120mm radiator this week

with ninija and fan @5v temps was under 70*C

sorry for my bad English

What tube you use? PrimoFlex?

**3NZ0** · 06-03-2007, 04:47 PM

My new system

Project log

**danks** · 06-03-2007, 06:53 PM

Originally had a storm block and my gpu's all in the same loop and my temps could have been better. So rebuilt my u2-ufo over the weekend and added another loop. I have to sleeve my psu wires one of the days to tidy things up but overall I'm happy with the way it came out.

PC:

A8N-SLI Premium
Athlon X2 4800 @ 2.75ghz 1.45v
Corsair 2GB Ram
2x 7800GTX @ 495mhz

Cooling:

Loop 1: mcp655 -> Thermochill PA 120.3 -> Fuzion -> Ek Multires 200
Loop 2: mcp655 -> Swiftech MCR220 -> Maze4 (GPU1) -> Maze4 (GPU2) -> Ek Multires 200

Using push/pull config with YL D12SM's @ about 7v on the rads. My camera isnt that great but here's a few pics.

**KAMILcom** · 06-03-2007, 10:54 PM

Originally Posted by manu

What tube you use? PrimoFlex?

Innovatek 8x10mm UVR blue
http://www.cooling.pl/product_info.p...oducts_id=1438

**dnb#** · 06-04-2007, 01:13 AM

Originally Posted by 3NZ0

My new system

Project log

That's really nice!

I've got the same case (akasa eclipse) and it's the best case i know...
You can put your ATX + sli 12v's + HDD cables in the holes next to your MB. Those holes are very usefull and it's a little mess inside your case... SO USE IT !!

for the ones that are using a lianli BUY AN AKASA, i've had several li's and this eclipse is better than all lili's together

nice build man keep it up

**~~septim~~** · 06-04-2007, 02:21 AM

hmm twin vortex for danks...

**danks** · 06-04-2007, 05:45 AM

Originally Posted by septim

hmm twin vortex for danks...

I really like the way it looks and once all the air was out it was nice and quiet.

**Sparky** · 06-04-2007, 11:10 AM

My Aurora Project

inside shot

lights out!

Fuzion on my Opteron 165:

MCW60 and Enzotech ramsinks on my X1950XT:

Another lights out angle:

And with the mesh side panel installed:

**Polizei** · 06-04-2007, 12:39 PM

I was waiting for this to end up in the gallery...

**3NZ0** · 06-04-2007, 02:28 PM

Originally Posted by dnb#

That's really nice!

I've got the same case (akasa eclipse) and it's the best case i know...
You can put your ATX + sli 12v's + HDD cables in the holes next to your MB. Those holes are very usefull and it's a little mess inside your case... SO USE IT !!

for the ones that are using a lianli BUY AN AKASA, i've had several li's and this eclipse is better than all lili's together

nice build man keep it up

I would do but the tagans power leads are not long enough!

All 5 sata cables do go through the bottom one with the FP connector.