sweet! whats your load temp?
and can you get higher clocks now?
sweet! whats your load temp?
and can you get higher clocks now?
Load at around -52°C, can get higher but till i get no higher voltage it's quite limitedOriginally posted by Der_KHAN
sweet! whats your load temp?
and can you get higher clocks now?
Look for the superpi and pifast threads in the xtreme oc section for results
I am number 1
just completed
See sig.
dude, you're the man!
wow.. , Congrats SAE. that is indeed very impressive score. Time to update the chart? ricjax99Originally posted by SAE
I am number 1
just completed
See sig.
Last edited by IamAnoobieCheez; 05-05-2004 at 06:50 AM.
very nice work SAE, though u could still work on the radeon clocks :P
oml congratsOriginally posted by SAE
I am number 1
just completed
See sig.
wdwd
260+fsb is just
NF7 v2.0 | 2400XP-M @ 220 x 13.5 2970mhz | Prometeia Mach 2 Cooled | 2 x 256MB XMS3500| R9800Pro (497/430) on air |
2x WD800JB Raid 0 | 1 x WD800JB (storage) | Antec TrueControl 550
3dmark2001
Mine is with a watercooled 9800np too I think that's pretty good score
Thank you all
My radeon is maxed cause i get artifacting and don't get higher with more voltage It's not a good core. Mem is at 2.7V default, and I tried to mod it some time ago. But even 3.2V did not get me higher but more terrible artifacts
Bad card. So this score is PURE FSB/BARTON POWER
I would gain some points with cooling it better but that's a problem too. Maybe I can mod my vapo classic a little but it takes time IMO, and I dunno if I I don't damage sth then
With a Mobile Barton at 3G you'd be right up there with the strongest P4's in system scores S.A.E.
Amazing fkn run there.
Proud Founder of Redline 3D
I already ordered a 2600+ today Hope it performs wellOriginally posted by Hallowed
With a Mobile Barton at 3G you'd be right up there with the strongest P4's in system scores S.A.E.
Amazing fkn run there.
oh no. lol
I hope you can get some good fsb clocks on that board of yours
gr8 score SAE!
so what and where did u buy your mobile from? what stepping?
Gigabyte GA-X58A-UD3R rev 2.0
Intel Core i7 950
2x MSI N460GTX Cyclone 768D5/OC in SLI
Corsair 6GB (3x2gb) DDR3 1600mhz C7
Silverstone ST75F-P 750w psu
Samsung F3 1TB
MY HEATWARE
Get ready for my pelt cooled R9800np
A64 3200+ Newcastle @ 2900mhz MachII Chilled | Dfi Lanparty UT 250GB | 160GB Maxtor | 74GBWD Raptor | 512MB BH-5 @240 2-2-2-11 | x800pro VIVO@16pipes 610/600 80w pelt cooled
30k 3dmark2k1
Excellent work SAE. I would have loved to have been able to offer you a challenge. But sadly, I no longer have my 2.8Ghz wonder mobile and my attempts at raising my Fsb with some new ram have failed. It's going to be a while now untill I best my current score.
£58.73 - This is the amount of money a loyal customer is worth to Overclockers.co.uk
Beware of buying from overclockers.co.uk, they will swindle you by abusing the consumer law if they need to refund you for faulty hardware. Thieving gits
so predictable!Originally posted by SAE
I already ordered a 2600+ today Hope it performs well
going for a vcore mod?
with your cooling id try 2.3v. let it burn!
Thx again at all
@Der_KHAN
Why predictable?
Vcore mod makes me unstable
@Thommy
This one I know (me has, too LOL)
@FlyingHamster
No stepping known Surprise effect...
CSSC here in Germany
Wow i missed a new number one-er
Ive been away for a while guys sorry i missed things will start updating now
Big CONGRATS SAE uber score m8
[Team CPUCITY] #6 Aircooled Athlon XP, 3D Mark 2001.
AMD Barton XP2800+ AQUCA SPMW 0328 2.4 GHz @1.825V | SLK900U, Vantec 92mm & Nexus | DFI NFII Ultra Infinity w/Bios 12-17 alpha @1.60V | 2X256MB Mushkin Level II BH-5 240.5MHz 11-2-2-2,0-13-15 @3.30V | Sapphire R350 & VGA Silencer @440/380 | Enermax 460W EG465AX-VE (G) FMA | 21,321 - 24/7 Gaming OC
3DMark 2001 SE = 22299 at 11x235MHz 11-2-2-2-2,0-9-12 w/NFII Ultra Infinity & R350 @ 459-390
3DMark 2003 = 6878 at 10.5x240MHz 11-2-2-2-2,0-9-12 w/NFII Ultra Infinity & R350 @459-390
AM3 = 51174 at 10.5x240MHz 11-2-2-2-2,0-9-12 w/NFII Ultra Infinity & R350 @459-390
SAE if ur card has 2.7Vmem default, then it must be samsung 8E ram..
what bios u running? recommend u try an E-die bios if u havent already
my mate gained 25 MHz from the bios on mem alone
Yeah, already have e-die bios by ati... but no real gainsOriginally posted by Ragnarok
SAE if ur card has 2.7Vmem default, then it must be samsung 8E ram..
what bios u running? recommend u try an E-die bios if u havent already
my mate gained 25 MHz from the bios on mem alone
Mem always oced bad on this card... artifacting appears after a while. 380 would never be gameable because of that, but at 374 I can play without glitches. Wish I had a better card.
P.S. Thanks, Richard
Last edited by SAE; 05-06-2004 at 08:31 AM.
try another one :P?
heheh I love pure FSB bruteforced scores, reminds me of my own scores (I always have video cards too)
Originally posted by Ragnarok
try another one :P?
heheh I love pure FSB bruteforced scores, reminds me of my own scores (I always have video cards too)
Bad luck with vid cards ever
I'll be on here soon.. Just you wait!
LOL @ avatar
Proud Founder of Redline 3D
Bookmarks