Have I achieved an AMD overclockers dream?

[TheJackal]

finally got my last stick 2day

1gb of BH-54 (i think) memory

1x 512mg 3200C2PT v1.1, 99.9% sure this is BH-5
1x 256mg 3200LLPT v1.1, 100% sure this is BH-5
1x 256mg 3500C2 v1.1, 100% sure this is BH-5

[Belgian_Dude]

What speed ?

[Endre]

XMS3200C2 v1.1 should be BH-6.

[Çhrist0ph]

2/2/2/2/9?

try 2/2/2/2/11

[sexsymbol]

yep go for 2-2-2-11 for nforce2 platforms seems to be faster.

[TheJackal]

i was under the impression that 2,2,2,2,11 was best for the NF7, i could be wrong thou

speed is 215mhz, i got a 2500 that don't like high fsb's

whats the deal with BH-6 then if it turns out that one of my sticks is that

[blinky]

what exactly is an amd overclockers dream, scpecifically?

[Endre]

Originally posted by sexsymbol
yep go for 2-2-2-11 for nforce2 platforms seems to be faster.

Depends on the FSB. Lower FSB = lower Tras.

[TheJackal]

bad news the 3500 stick was giving me problems, took the heat spreader off, and its missing 2 resistors, will post pics later

[CrashOv3r1De]

Looks good

[TheJackal]

heres a pic of the missing bits, sorry bout pic quality

but you can see its missing 2 small resistors,

i take it these are nessisary as there on the stick in the first place

[jfr0]

If you look right above that a whole ram chip is missing.

there is a good possibility that there are not supposed to be resistors there.

[hrhrhrfoot]

lol he catches the transistors but not the ram chip XD

in all seriousness, you should RMA that baby stat.

[Boyne7]

im wondering, what does this have to do with "an AMD overclockers dream?"
lol
nice find on the ram though
and yes as jfr0 said there is a possibility that there were never resistors there in the first place

[TheJackal]

yes there was, as i still got one of them somewhere, no point in RMA'ing as i won't get BH-5 back will I? if i can get the same resistors i can easily fix it

as for "an AMD overclockers dream" tis the best memory to have in an AMD rig IMO

[Soulburner]

Originally posted by TheJackal
as for "an AMD overclockers dream" tis the best memory to have in an AMD rig IMO

Don't see why this is specifically aimed at AMD, low latency is the best memory for any rig.

[st0nedpenguin]

My idea of an AMD overclockers dream would be some BH-5 that will run a decent FSB.

[TheJackal]

i managed 245mhz last night, timings 2,3,3,3,11

[TheDogFather]

How many volts is that with ?

TDF.

[st0nedpenguin]

I can "manage" 250x10 @ 3v easy, it's for how long that's causing me problems.

[TheJackal]

thats at 3.2 volts

[sexsymbol]

Originally posted by Endre
Depends on the FSB. Lower FSB = lower Tras.

My personal expirience with NF7 gave me same results or better with 2-2-2-11 over 2-2-2-5. Using as benchmark sandra. I´ve tried those results with 230FSB up to 245FSB.

[HELLBOY]

WTG

[benonmsn]

i can 245 2-2-2-11.. thats closer to a dream i guess.. but still not a dream ,its reality for atleast 10,000 people. i dont see the point ::the jackal::... but thats just me. good work! or soemthing

[TheJackal]

i aint gone xtreme enough for some people it seems.......