xp 2400 less than 2500 mhz
xp 2400 less than 2700 mhz
xp 2400 more equal more 2700
xp 2500 less than 2500 mhz
xp 2500 less than 2700 mhz
xp 2500 equal more than 2700 mhz
xp 2600 less than 2500 mhz
xp 2600 less than 2700 mhz
xp 2600 equal more than 2700 mhz
an moblie barton equal more than 2900 mhz
OK I want to know max overclocking results on air with the mobile barton!
Please post yours in the poll lots of options in this poll because I'm polling 2400, 2500 and 2600 bartons 512 kb cache stable on air I just want to get a feel for what these things can do!
just stable results please and if you post a reply please keep it very short without sig to we cangat a database going.
multiple votes by users allowed please only one vote per CPU.
In order to keep the statistics real
terramir
Last edited by OPPAINTER; 03-27-2004 at 10:57 AM.
well where are some more votes cmon ppl
I wanna see some
BTW can a moderator rename this moblie barton poll since I can't do that
Last edited by terramir; 03-26-2004 at 06:19 PM.
it really depends on the temperature of the room the pc's in. people are getting 2700mhz on air with the 2600-m's... but that is sweet sweet air
Asus A7N8X-E Deluxe
Athlon XP 2800+ Barton @ 3200+ (200x11)
Mushkin DDR400 BASIC 2*512mb
Albatron GeForce 6600GT 128mb (Being Repaired)
Samsung SyncMaster 730BF 17" (4ms RT, 600:1 CR)
my buds got 2.55Ghz prime stable with only 1.7vcore on his 2400m
I hate your bud
Nah, but I need 1.9v just to get over 2.5GHz. It seems likequite a bit less volts would work, but long term stability is a no go without it. Maybe better when I put it in my water setup. Some of these bartons really start to tail off the benfits of extra v at least without extremecooling.
we can't just have 11 peeps with a mobile athlon hmmmm come on people vote, I will vote too when I see what mine can't dothey shipped today not yesterday so
terramir
Vote vote vote remember you got two chips two votes
Last edited by terramir; 03-26-2004 at 06:18 PM.
your sig is very big, one of th biggest i think i've seen and you forgot to remove it from your more recent post.Originally posted by terramir
please keep it very short without sig
I would vote for my results, but I don't have any on air, just water. I bet i could get 2.6 ghz on my 2600+ on air, but i dont have any hsf to try on it. sorry.
do u want me to vote on what i "feel" my chip can do on air? i can do that
fixed :P
and I changed my sig today too
Last edited by terramir; 03-27-2004 at 02:50 AM.
My 2600m does 2700MHz on air at 1.85v
AMD XP-M 2600+ @ 2.4GHz (12x200) - 1.75v
DFI NFII Ultra Infinity Rev. A
2x1GB Crucial Ballistix Tracer PC4000 @ 400MHz 2-2-2-5 - 2.8v
BFG 7800GS @ 475/1550
OCZ Powerstream 600W (+3.6, +5.4, +12.6)
Swiftech MCX462-V-->92mm Tornado-->MCX159-A
nForce UDP 5.10
Forceware 97.44 XtremeG
Win XP Home SP2
please vote also hey how are your voltage?
stable?
how can there be 4 people with an aircooled AXP mobile @ 2.9ghz?
*sigh*
i7 920 D0 @ 2.8ghz // GTX 670 // Rampage II Extreme // 14GBs DDR3 // 550w PSU // corsair H100i // Corsair 800DMay 30th, 2007Originally Posted by Haltech
i7 3770k stock // Maximus V Gene // 16GB @1600 // OCZ z850 //
i7 3930k @ 4.5ghz // 780 SLI // P9X79-E WS // 16GB @ 1600 // AX1200i // and a horrible swiftech h220 // Carbide Air 540
Heres my mobile 2500+
Hey PCBliss how much is 2730mhz in + ? , ????+
I dont understand how do u count on AMD processors?
Asus P4C800-E Deluxe.
Intel Pentium 4 XE - 3.8GHz @ 4.3
Leadtek GeForce 6800 ultra@ ultra extreme 480/1250
Kingston 1GB Kit HyperX pc4000.@ 2-5-2-2
Vupichill LE
GigaByte GA-8ANXP-D.
Intel Pentium 4 w 3.6GHz @ 4.1GHz
Corsair 1GB PC3200 DDR DIMM.
Leadtek GeForce 6800 GT @ ?.
Asus A8N32-SLI Deluxe
Asus Extreme N7800 GT DUAL
AMD Athlon 64 fx-60
OCZ pc3800 platinum
__________________________________
Sorry my english is not wonderfull but im still learning it!!!!
Can you guys get high FSB's with your mobiles? 270-280MHz FSB on Infinity/LP Rev. B....
Have you done the L12 mod?
I've had it upto 233 x 12 @ 2.1 volts, cooled by airconditioning
:22706
£58.73 - This is the amount of money a loyal customer is worth to Overclockers.co.uk
Beware of buying from overclockers.co.uk, they will swindle you by abusing the consumer law if they need to refund you for faulty hardware. Thieving gits
2706
M-Barton XP2500
Abit NF7-S Rev2 (unmodded as yet)
OCZ EL PC3500
Asetek Waterchill Cooling
Still got a lot of burning in to do, hopefully get stable at this speed.
M-Barton XP2500 @ 2678Mhz (12.5x214) 2v|2*256Mb OCZ EL PC3500 @ (2, 3, 3, 11) 2.8v| Abit NF7-s rev2 | Gf4 ti4200 @ 320x605 AGP 66Mhz
3DMark :: 2001SE = 15507
Project -::Y::- : Project : Clear -::Y::-
www.yodasarmpit.co.uk
CPU: Amd XP-M 2500 Barton
Stepping: IQYHA 0351 MPMW
Motherboard: ABit NF7-S v 2.0
Cooling: Thermalright SLK 900A
Default Speed: 1866Mhz (14 x 133Mhz)
Default Voltage: 1.45v
Overclocked Speed: 2600MHz (13 x 200MHz)
Overclocked Voltage: 1.95 volts (Bios)
Stability: Prime95 #8 hours
Probably a little more to go, but not much!
yea guys new guy here
-=-=- 2500m
IQYHA 0348RPMW
2.4 1.75v stable 24 p95 10pr 11.5x210
2.5 1.95v stable 24 p95 10pr 12x210
Oops . I voted for "xp 2400 more equal more 2700" before I realised you wanted air cooling results only
Currently, I'm experiencing power supply issues but mines stable enough for games (and a coupe of hours of Prime). 2.7GHz at 1.825V 12.5 x 218 @ 2.9Vdmm.
Hope to get more after an L12 wire mod and a pin mod to get to the higher multis. (after my fortron 530 arrives).
Enjoy!
Last edited by Happy Joe; 04-11-2004 at 08:43 AM.
I got 226 x 12 after the l-12 mod
2500 barton-m/2707mhz 2vt/31c
NF7-s 2.0
2x256/Bh-5 @11-2-2-2 2.9
h20/ BIE /silver block/11c delta
5054 in PCMark04
http://service.futuremark.com/compare?pcm04=2298901
Last edited by ZENNZZO; 04-15-2004 at 09:14 AM.
I've got my XP-M2500+ @ 2505mhz - 200x12.5 - 1.875Vcore .
Looking good too, Prime stable 40hours priority 10 "Was out for the weekend"
Stopped it when i returned home from my sisters to play
ut2k4straight after a reboot it was fine and dandy .
I have had it at 2605mhz - 200x13 - 2.0Vcore stable just for a
test run with 3dmark01se and 03, And i know i could get more
but i am happy for now at 2505mhz, Kick ass cpu's these ...
Have a 0333 that does 2533 max @ 2.2v set. (2.04vmin)
Have a 0414 that does 2600 max @ 2.2v set. (2.04vmin)
0414 does 2450 @ 1.95v set (1.83vmin)
And these are some of the worst results I've seen on these chips.
2600 IQYHA
SLK900+90mm
8rda3+
TwinmoS 50D
Quite scatisfied with this chip. I'm sure it has a lot more potential. Just need to keep the temps down and i know i can hit 2900 and maybe even 3000 soon.
Greetz, Carlito
yup so does mine on air but i need alittle more i need 1.9v! i got lucky and got one of them 2600-m 0401UPMW's from new egg before they ran out a few months back. just got a mach1 and a mounting kit and once my nf7 gets back from hell fire ill be going for 3 gigs. 2700mhz was my max infact not verry stable but i did mange it on air. heres the money shotOriginally posted by Dojo | Warlord
My 2600m does 2700MHz on air at 1.85v
this pic is my best oc on air.
peace perc,
Last edited by Perc; 05-08-2004 at 07:13 PM.
Posting Permissions
Reply With Quote
Bookmarks