bios/battery issue? My infinity was pushing 3.5v to my BH-6 when set to 3.3v once for some reason.. no vmods done to it then.
bios/battery issue? My infinity was pushing 3.5v to my BH-6 when set to 3.3v once for some reason.. no vmods done to it then.
All along the watchtower the watchmen watch the eternal return.
Aha. I thought you were talking about the battery trick to up your vdimm. Can be an issue too, in case the board cannot supply a stable high vdimm (had some Infinity boards like that)...Originally Posted by STEvil
some update...
6-19 3D Fire R2
Change Log from 6-19 3D Fire:
1) SATA Bios upgrade to Version 5044
2) CPU Disconnect Function Patch
3) Side Band Addressing Enabled
4) PCI Latency 128clock
5) EXT P2P Discard Time 1ms
6) LAN Latency 128clock
7) SATA Latency 128clock
Download Link
http://www.tictac.katrourke.com/bios/DFI-N...9-3DFire-R2.zip
Important Notice!!!
You must enable SATA in bios. I inject it through SATA Bios.
If you have problem booting into windows After Bios boot....
Restart ... go into bios and Disabled SATA...
It will boot fine to windows
If this problem occured please report it to me. Thank you
One thing to Audigy or sound problem. I think is not Audigy 1 problem. This message Audio switcher out is all audio output, not only Audigy. Where is a problem? That problem have only my? Its verry uncomfortable problem. I run any important programs and in the middle upsss > audio switcher out and no sound . Must restart. Thats gonna make me crazy.
o/c und u/c is my fun
Undervolting rulezz. Gigabyte Z68XP-UD4+ i2500k@3GHz@1.000v+ next extra low voltage settings, CM Hyper 212+, Gigabyte HD7750 2GB DDR3+Sapphire 7750 Oc 1GB DDR5, 2x4GB Corsair DDR3 1600@1.3v, Samsung 1TB-F3, Thermaltake Armor Jr.,2x120 Revoltec,Zalman Fan mate2, FSP Aurum 400w GOLD, 59w idle. WCG 2x gpu load- 85w,
Seti@home benchmark
@tictac, any idea how this bios will effect performance over the hellfire rev3?
ive always had good luck with the HF/1-21 bios' but i dunno maybe this will help the board be more consistent...
ill be the guniea(spelling?) pig here i guess....
Originally Posted by ex.treme
Hehe... yeah, sound problems are not very seldom with these NF2 at high clocks.
Soon you will have my board/cpu in your hands (if you still want it ) and maybe it gets better (I do hope so)... :thumbsup:
I have no idea how it perform compare to Hellfire / Merlin / Evilous modded biosOriginally Posted by Revv23
anyway here is the bootup logo in that bios
thats cool, im still not home
hopefully ill have time tonight to load it up... i just hope this bios makes stuff more consistent ya know?
SAE: i wanna and hope too
o/c und u/c is my fun
Undervolting rulezz. Gigabyte Z68XP-UD4+ i2500k@3GHz@1.000v+ next extra low voltage settings, CM Hyper 212+, Gigabyte HD7750 2GB DDR3+Sapphire 7750 Oc 1GB DDR5, 2x4GB Corsair DDR3 1600@1.3v, Samsung 1TB-F3, Thermaltake Armor Jr.,2x120 Revoltec,Zalman Fan mate2, FSP Aurum 400w GOLD, 59w idle. WCG 2x gpu load- 85w,
Seti@home benchmark
Hi all
i have purchased a DFI Infinity from about a week.
I'm, for now, satisfied... But i want to ask a question regarding this mobo
Is there a software that concern me to view VDD voltage from windows? MBM seems not do this...
Thanks for help
read through this guide. the software in unreliable. use a multimeter. points are on first page of this guide.Originally Posted by FireFoxII
there isnt VDD monitor on the board, hence the bios not showing VDD and no software reading it out to you...
hey, newegg is out of LPB mobos so they cant rma it. they are just giving me my money back. so should i just get another LPB from zipzoomfly or should i get a NF7-S?
First off: Welcome to the sicknessOriginally Posted by FireFoxII
And referring to the vdd readout the other are fully right... sad but true. You have to reliably measure with a DMM.
When u've used LP B u surely DON'T want to switch BACK to NF7-S ...Originally Posted by stealth17
Get another one
or should i hold off on the DD and just water cool a nice 64bit nf4? like what chip would i want and would i need a new video card since i have a agp?Originally Posted by Massive
At least i saw the 2650
Without any mosfet cooling etc.
Will come soon if i have time!
DFI Lanparty B
XP-M 2600+ IQYHA 0401XPMW
2x256MB Corsair XMS3500 BH5 11-2-2-2-2.0
Gainward FX5900XT Ultra GoldenSample
Hey Esox, my friend
:thumbsup:
Up the vcore to 1.85V and it should work
i`ll try
DFI Lanparty B
XP-M 2600+ IQYHA 0401XPMW
2x256MB Corsair XMS3500 BH5 11-2-2-2-2.0
Gainward FX5900XT Ultra GoldenSample
Originally Posted by stealth17
you could ask them for an infinity...
same board really...
From my experiences the Lanparty boards are better in general, but DFI themselves officially deny it.Originally Posted by Revv23
Originally Posted by SAE
really?
ive always felt that the difference was non existent, and the TW boards were the good ones...LP or not...you have much more experience then me though.
Hehe, I've had 7 Infinities (two TW ones) and 5 Lanparty Bs (three TW ones)... and I can say for sure, the China boards sucked compared to the TW ones, and the LP B boards beat the InfinitiesOriginally Posted by Revv23
damn, did you sell them or kill them hehe?
i wonder what the differences are, from a design standpoint they are the same in the important stuff, maybe they pick better clocking NB's?
who knows...
Hey guys. You have Xp or Win 2000 system? ( Which S.pack)
How is best for overclockers?
o/c und u/c is my fun
Undervolting rulezz. Gigabyte Z68XP-UD4+ i2500k@3GHz@1.000v+ next extra low voltage settings, CM Hyper 212+, Gigabyte HD7750 2GB DDR3+Sapphire 7750 Oc 1GB DDR5, 2x4GB Corsair DDR3 1600@1.3v, Samsung 1TB-F3, Thermaltake Armor Jr.,2x120 Revoltec,Zalman Fan mate2, FSP Aurum 400w GOLD, 59w idle. WCG 2x gpu load- 85w,
Seti@home benchmark
Bookmarks