Here's my Zytrachill
Here's my Zytrachill
wow nice that things like 4 ft tall~!Originally Posted by misteroadster
It's awesome, but is the res not too big?
AMD Athlon XP Thouroughbred 1800+ @ 1800 Mhz
ASUS A7N8X rev2
ATi 9800 Pro @ 395-345
512 DDR 3200 Samsung TCCC
Brrrrr... Looks cool!
Lian-Li PC-75B, Asus P5WGD2 WS Pro (BIOS 502), Intel Q6600 G0@ 3.5GHz 1.50V, G.SKILL BHZ, 2048-6400C4,4:3@5-5-5-15-5,EVGA GeForce 8800GTX 768MB, CC-644MHz / MC-1100MHz, HT OMEGA CLARO 7.1, Logitech z-5500 5.1, Enermax 660W SLI, Boot Drive - Raptor X WD1500AHFD 150GB, Two Storage & Backup HD's-WD 320GB SATAII inclosed in ICY Dock Hot swapable HD racks, NEC DVD +/-RW ND-3550A, Lite-on DVD ROM SHOD-16P, 52-in-1 cardreader, Deck Legend-Ice Keyboard, Back to my Logi MX500 @1000Hz
-monitor#1 Dell 2407WFP rev. A04, res. 1920x1200
-monitor#2 TV Vizio GV42L, connected with 30' RapidRun cable, Audio - 30' S/PDIF, Belden/Canare cable-> Marantz AV9000 5.1-> 5X 600w ADCOM monoblocks, Veledyne SPL-1200 Sub, SpecResearch keyboard.
Custom Watercooled->CritiCool PowerPlant PCI Relay Card(modded)->Meanwell S150->Iwaki RD-30-> PA120.3 w/ shroud & Yate Loon D12SL-12 Fans, Nexus fan controller->Storm G5->MCW60
srry I was on the wrong page to post a new thread, but while im here let me say at all your creations people
Last edited by Mr.Orange; 11-19-2004 at 08:36 AM.
Sys 1 Deep Blue II
P IV 3.0 800 fsb @ 3.55
Asus P4P800 Deluxe
Asus Fx 5700 256 Mb DDR
Matchedpair 1024 Mb DDR
Custum watercooling system / 600W tec
Sys 2 Shallow Blue
AMD 2800+
Asus KT600
Asus Fx 5200
singele 512 Mb DDR
Standard aircooled
Zytrachill looks superpimp
that is a really nice chiller ya got there tricknasty
my chiller setup.
Q9550 EO @ 4.1
Asus P5Q Deluxe
4 Gb DDR2 Gskill
2xVelociraptors 300 gb Raid 0
Sapphire Vapor 4870 1Gb
PCP&C 750w silencer psu
Thats frickin awesome!! great job !!
looks like a factory job amigo, nice work
A time ago i bought this rusty old condensing unit. Perfect for my chiller. I took it apart so i could use the condensor and baseplates for the chiller. The compressor was good enough to use for vacuming the system, the final compressor for the chiller is a 1/5HP Unidad Hermetica (l'Unité Hermetique).
DFI nF4 Ultra-D
Gigabyte Geforce 6600 GT
2x 256MB Adata /BH5 (268 - 1,5-2-2-5)
-35 deg. C R290 / 1/5HP waterchiller
Ministry of Overclocking Contests
Lot's of rust needed to be removed, but after one day cleaning and painting this was the result....
A pretty clean unit
DFI nF4 Ultra-D
Gigabyte Geforce 6600 GT
2x 256MB Adata /BH5 (268 - 1,5-2-2-5)
-35 deg. C R290 / 1/5HP waterchiller
Ministry of Overclocking Contests
Fixed the pipework and vacuum unit
DFI nF4 Ultra-D
Gigabyte Geforce 6600 GT
2x 256MB Adata /BH5 (268 - 1,5-2-2-5)
-35 deg. C R290 / 1/5HP waterchiller
Ministry of Overclocking Contests
Charging with R290 I like ice
DFI nF4 Ultra-D
Gigabyte Geforce 6600 GT
2x 256MB Adata /BH5 (268 - 1,5-2-2-5)
-35 deg. C R290 / 1/5HP waterchiller
Ministry of Overclocking Contests
nice job! that prolly cost you clsoe to nothing. good job
I didn't really "buy" the condensing unit. Just brougt some kilograms of old copper tubing to the scrapyard, and i could take the unit away . The other compressor was about $ 7 or somethingOriginally Posted by JSU
Then just pipework, dryer, paint, gas and the standard two way manifold. Nah, didn't cost me that much, i think about $ 100 totally. But there are many fixed costs like the manifold and pipework, you can use them again And offcourse the other standard materials like pipe cutters and other equipment, but that's some stuff i allready have for years
Last edited by erik9287nl; 02-21-2005 at 11:06 AM.
DFI nF4 Ultra-D
Gigabyte Geforce 6600 GT
2x 256MB Adata /BH5 (268 - 1,5-2-2-5)
-35 deg. C R290 / 1/5HP waterchiller
Ministry of Overclocking Contests
Almost finishing mine :
time to insulate the board.
Q9550 EO @ 4.1
Asus P5Q Deluxe
4 Gb DDR2 Gskill
2xVelociraptors 300 gb Raid 0
Sapphire Vapor 4870 1Gb
PCP&C 750w silencer psu
Nice wrappage around the block. How did you get it to look so "clean?"
The insulation of the block was made by a friend . It still condensing on the top, maybe because it is make from aluminium.
Q9550 EO @ 4.1
Asus P5Q Deluxe
4 Gb DDR2 Gskill
2xVelociraptors 300 gb Raid 0
Sapphire Vapor 4870 1Gb
PCP&C 750w silencer psu
Very nice guys!
I'm looking into building a chiller now since I have outgrown my Water setup.
I wanted a small/compact chiller I could fit inside my case. Is there something like that I could do?
From what I see here the chillers you guys use are HUGE!!
P4C800E DL,P4 2.4c @ 3.4(droop mod),1G Mushkin 3500 II 2,2,2,8 @ 3.1v,AIW 9800 Pro (450/370 @ 1.9v core),Audiology Platinum,2xDiamonds 8mb Raid0,Lian-Li Pc70,PC P & Cooling 510D,Plextor 708A,Plextor 52x32x52...water cooled...
you can definately fit a chiller in a case, with a tiny compressor such as a bd35. bd50 (these compressor can fit in the 5.25" drive bay (takes up 4 bays)
How effective is that? What temps can be reached with that setup?Originally Posted by echow87
P4C800E DL,P4 2.4c @ 3.4(droop mod),1G Mushkin 3500 II 2,2,2,8 @ 3.1v,AIW 9800 Pro (450/370 @ 1.9v core),Audiology Platinum,2xDiamonds 8mb Raid0,Lian-Li Pc70,PC P & Cooling 510D,Plextor 708A,Plextor 52x32x52...water cooled...
Sure it's possible. I'm currently making a chiller in a case (Yeong-Yang cube).
Its hard to make it fit, but with some consessions (just one optical drive and one or two harddisks) it's possible, but still hard.
DFI nF4 Ultra-D
Gigabyte Geforce 6600 GT
2x 256MB Adata /BH5 (268 - 1,5-2-2-5)
-35 deg. C R290 / 1/5HP waterchiller
Ministry of Overclocking Contests
you will need to fit the reservoir too.
Q9550 EO @ 4.1
Asus P5Q Deluxe
4 Gb DDR2 Gskill
2xVelociraptors 300 gb Raid 0
Sapphire Vapor 4870 1Gb
PCP&C 750w silencer psu
Bookmarks