Video review and the voltage seems to go to 2.30V in bios without modifications.
http://www.3dgameman.com/
Video review and the voltage seems to go to 2.30V in bios without modifications.
http://www.3dgameman.com/
Isn't the AK35 board awesome? While waiting for this board. I read somewhere else they already have the AK37 ready!
It's driving me crazy!
Here is the link for the 37:
http://www.vr-zone.com/#2039
Via KT333A WOOT!
Xtremesystems "XIP" Requirements
check out "XS REVIEWS"
Want me to believe your hardware review? Show me a receipt
Yes, the AK37GT/R is based on the new KT333 chipset to be announced for release on Feb. 05 or so followed by the KT333A with USB 2.0 and AGP 8X.
It seems the FSB on the KT333 will be 266 and the memory can be run at 333Mhz. This reminds me of the KT133 and KT133A which was almost the exact same situation.
After my AK35GTR purchase in the next several weeks, I will wait until the KT333A is released which might be AK37GTRv2.0?
You too! I can't wait for the board to be released!Originally posted by DaGoochMeister
After my AK35GTR purchase in the next several weeks
Xtremesystems "XIP" Requirements
check out "XS REVIEWS"
Want me to believe your hardware review? Show me a receipt
Originally posted by JAWS
You too! I can't wait for the board to be released!
tres mi!!!!!!
Originally posted by JBell
tres mi!!!!!!
Does that make three of us? LOL!
Xtremesystems "XIP" Requirements
check out "XS REVIEWS"
Want me to believe your hardware review? Show me a receipt
When is it gonna be out?Originally posted by JAWS
You too! I can't wait for the board to be released!
Dewd! I like the sig... And that's my favorite Megadeth album. But all I understand is "To all the world".Originally posted by JBell
tres mi!!!!!!
Originally posted by Smizack
Dewd! I like the sig... And that's my favorite Megadeth album.
'bout time someone noticed!!!! LOL
Well, you change it too much!Originally posted by JBell
'bout time someone noticed!!!! LOL
Hey, what does it mean after "to all the world"??
I would say in the next month!Originally posted by Smizack
When is it gonna be out?
Xtremesystems "XIP" Requirements
check out "XS REVIEWS"
Want me to believe your hardware review? Show me a receipt
Sweet, I'm still looking for a new board.Originally posted by JAWS
I would say in the next month!
I got my student loan check 2 weeks ago. I want to get a new setup so bad, but I'm willing to wait though!Originally posted by Smizack
Sweet, I'm still looking for a new board.
The best part, it will be listed around $100.
Xtremesystems "XIP" Requirements
check out "XS REVIEWS"
Want me to believe your hardware review? Show me a receipt
Not bad at all. I might have to wait a bit then. Thanks for the info.Originally posted by JAWS
I got my student loan check 2 weeks ago. I want to get a new setup so bad, but I'm willing to wait though!
The best part, it will be listed around $100.
AnandTech did a review on the board for their KT266A roundup and it takes home an award from them!
http://www.anandtech.com/mb/showdoc.html?i=1578
The AK35GTR is listed at NewEgg for $129.00 but no listing for the AK35GT. Availability seems to be 01/25/02.
One thing about these extremely high voltages, watercooling or an 80mm heatsink and fan combination is a must. I know the Swiftech MCX462 fits without modification but the Alpha 8045 needs a 5 minute modfication on one of it's corners to fit correctly.
Thanks for the heads up! What’s the difference between the two?Originally posted by DaGoochMeister
The AK35GTR is listed at NewEgg for $129.00 but no listing for the AK35GT. Availability seems to be 01/25/02.
Xtremesystems "XIP" Requirements
check out "XS REVIEWS"
Want me to believe your hardware review? Show me a receipt
AK35GTR consists of:
VIA VT8366A/VT8233 Chipset
Supports AMD K7 AthlonXP/Athlon/Duron FSB 200/266 Processors
Four DDR DIMM supports up to 4GB PC1600/PC2100 DDR DIMM
Supports AGP 4X, and 6 USB ports (1.0)
Supports UDMA ATA 100/66/33 IDE interface
Onboard High Point 372 ATA-133 IDE RAID support (AK35GTR only)
Onboard C-Media 6ch. H/W Audio support
Hardware Monitoring supports
AK35GT consists of:
VIA VT8366A/VT8233 Chipset
Supports AMD K7 AthlonXP/Athlon/Duron FSB 200/266 Processors
Four DDR DIMM supports up to 4GB PC1600/PC2100 DDR DIMM
Supports AGP 4X, and 6 USB ports (1.0)
Supports UDMA ATA 100/66/33 IDE interface
Onboard C-Media 6ch. H/W Audio support
Hardware Monitoring supports
The AK35GTR has the onboard raid controller card.
Cool, thanks for all the info! I guess I'll be biting my tongue until 1/25.
Xtremesystems "XIP" Requirements
check out "XS REVIEWS"
Want me to believe your hardware review? Show me a receipt
Originally posted by DaGoochMeister
http://192.216.185.10/mwave/ProdMB-S...rodMB-SHU.hmx?
that is ONLY $115???? WOW!
newegg's got them for $119. Looks like mwave's the way to go.Originally posted by JBell
that is ONLY $115???? WOW!
Xtremesystems "XIP" Requirements
check out "XS REVIEWS"
Want me to believe your hardware review? Show me a receipt
I have heard a lot of bad things about newegg - I will never EVEN visit their website - no need to I know of sooo many other websites....Originally posted by JAWS
newegg's got them for $119. Looks like mwave's the way to go.
I have also, I've never ordered from them, but I've heard a lot of people complain about 'em.Originally posted by JBell
I have heard a lot of bad things about newegg - I will never EVEN visit their website - no need to I know of sooo many other websites....
That's weird!I thought they were one of the best?
Xtremesystems "XIP" Requirements
check out "XS REVIEWS"
Want me to believe your hardware review? Show me a receipt
Got the board this weekend from MWave and all I can say is that it ROX!. The highpoint Raid controller is faster compared to my Promise Raid controller. The Vcore adjustments work all the way to 2.3V. Sandra TE memory scores are 810/990 with FSB @ 133Mhz. All I can say is I saved $50 with this board instead of getting the KR7A-Raid and also Vcore up to 2.3V!
Posting Permissions
Reply With Quote
