i will test it man when i will have my 2.4C(3 days!). I hope i dont have that problem. If yes, i will look for some OCZ PC4400!
i will test it man when i will have my 2.4C(3 days!). I hope i dont have that problem. If yes, i will look for some OCZ PC4400!
I hope you wont have that problem m8... its soo damm annoying... 260... BEEEEEPPPPP.
O well... i can go over it 1:1 with 3.6v
and skate, what voltage did u feed your mem for them to do 273?
Only 3.3V, but it was not 100% stable. After like 1hour of folding it was crashing. I Think the 250FSB wall can be jumped w/ some high voltage, no?
And if no, i to buy some new stock
AGAIN!!!!!!!!!!!!!
well 1 week ago, i bought some ram for my freind... KHX 3500 aswell as he was impressed with 260mhz with 3.4v on my sticks
i tryed it in my rig.. and its the same.. it runs 2-2-2-5 just like mine... but even with 3.6v it dont want to go over the probi treid up to 3.8v on mine... and it wouldnt go... they got damm hot though. seems like this will never be fixed, maybe only with a revision in the chipset.
I have the last mobo revision, and the last CH5 revision. So all the chance are on my side
good luck. your getting your 2.4C tommorow? cant wait for your results!
enzor: I will start it monday coze my vendor dont work the week end(he probably have it right now). He have my pump, my MCW5000P too. And ive just orded my MCW50T by free ground yesterday, so....I will give you some results in about 3-4days.
I whant to have all before starting.
Asus P4P800 deluxe
Q-tec dual fan Gold psu 450W
Pen 2.6 ghz with zalman Copper cooler
OCZ dual gold Pc4000 512 mb
Maxtor 40 gb 7200
Sparkle G-force 4 mx440 64mb
Thermaltake Xaser Skull case
You have BH5 chips, i got the same modul my selfOriginally posted by sjohnson
I bought two sticks of 256M KHX3000 three weeks ago from Newegg.
Markings:
Kingston
V56646
0306P01
D328DW-45
Up to 243 FSB, 1:1 at 3.2v and 2-2-2-5 timings, dual channel. I don't care if they're BH-6, BH-5 or CH-5 they're doing just fine
262 @ 3.38v and 2-2-2-5 timings
Last edited by Orak; 04-04-2004 at 12:24 PM.
A64 3200 @ x - Gigiabyte K8N modded - HyperX PC3000 - Radeon 9800PRO modded - Enermax 350 modded - Vapochill BD35F r404a modded
Running my Hyper-X 3500 dual channel kit @ 232MHz 2-3-2-6 right now with 2.9V.
Memtest stable 204MHz 2-2-2-5 @ 2.9V
If I set the timings to 3-4-4-8 I cant even get past 250
Posting Permissions
Reply With Quote
Bookmarks