Results 1 to 2 of 2

Thread: Looking to redo my old build

  1. #1
    Xtreme Addict
    Join Date
    Dec 2004
    Location
    Southern California
    Posts
    1,214

    Looking to redo my old build

    Hello everyone, it's been a long time, but I am finally getting back into PC's and overclocking, gaming, etc. I have so many questions and feel like I am a complete novice again because I've been away from the scene for so long. I am not sure whether I am going AMD or Intel for the build, but I will build a high-end gaming computer. I am going to migrate my x99 setup into my server. Now, I am curious since my parts are mostly from around 2015, is anything still worth-while or will I need to replace all watercooling parts? The last thread I had, I was informed most of my parts were restrictive, minus the GPU block. I am open to all suggestions and I wouldn't mind something a little over the top.

    Currently I have the following:

    Radiator: Dual Swiftech MCR320-XP with push pull with Gentle Typhoons (id have to look up the model, I just remember they were some of the more sought after fans at the time)
    Pump: Swiftech mcp50x but I do have a MCP655 modded laying around too
    Tubing is 7/16
    CPU: Heatkiller CPU Block
    GPU: doesnt matter as it will be replaced
    I have two quick disconnects from koolance and I would like to keep a set on the system for easy upgrades and what not, but looking back I never even really upgraded so maybe I can get rid of them if they are still really restrictive.

    From what I have researched, HWLabs makes the best radiators. Would my current fans work OK on them? I have a diamastech bench table that I want to continue using, I could go with a tad wider radiator than what I have now. is push pull still the optimal setup?

    Thanks for any suggestions and help.
    Pentium 4 3.2E (SL7PN E0) @ 4246.46 MHz (265.4 * 16) 1.48cvore
    Intel Core i7 4930k@ Stock (Still testing) - ASUS Rampage IV Black - 16GB (4 x 4gb) GSkill TridentX@ Stock - MSI Lightning 290X 4GB - Creative Titanium HD - 2 x Cruicial m4 256GB SSD (RAID0) - Corsair AX1200I
    Phase unit by runmc @ full load -33
    H2O Loop - EX X3 400 Res>MCP655 modded>MCR320-XP>MCR320-XP>EK-FC R9-290X Lightning - Acetal+Nickel

  2. #2
    Registered User
    Join Date
    Mar 2010
    Location
    Seattle, WA, USA
    Posts
    16
    Not many active here these days.

    Anyway HWLabs makes good rads for sure. I have 2 blackice nemesis rads in my current gaming rig. 54mmx360mm and 54mmx480mm. With those two rads in my case I can run my 7 radiator fans at 600rpm for silent operation and it keeps up with gaming load while having a core I9-9900kf (all cores at 5.0GHz) and a RTX 2080 TI FE (@2100MHz) in the loop.

    Highly recommend HWLabs blackice nemesis rads. Best performance for the money for sure. I believe performance-pcs has them for $77/ea. It's not listed on there, but they come with the mounting screws needed for fans and to mount to your case. You just need to supply the fans.

    Heatkiller still is a decent CPU block as long as it fits 1151 and am4 sockets you can reuse. otherwise it needs replaced too.

    Your pump might need an update, but that's up to you. I recommend twin DDC pumps or a D5 pump. I run a D5 in my gaming rig and twin DDCs in my threadripper.

    I'd use 3/8ID x 1/2OD tubing from the hardware store it's stupid cheap there... $0.44/ft after tax from lowes. 10ft should be enough for almost any rig.

    Koolance for compression fittings and coolant. I've used their 702 coolant for over a decade and never had to clean the system once. no buildup at all, no residue left behind ever. Also their fittings are cheaper than anyone else I've seen yet they're superior quality at the same time.

    Their blocks are pretty nice too, but they don't make RTX blocks yet for GPUs. not sure if they ever will might have to go heatkiller there.

    As far as pumps go: really doesn't matter what manufacturer you go with. same company pretty much makes all of the D5 and DDC pumps.

    if you use the black ice nemesis rads from hwlabs...you won't need push pull fans. those rads flow air very nicely and have excellent heat dissipation. if your old fans still work well: reuse them and throttle them down if you have enough space in your case for decent rad capacity.

    Suggest using fan hubs to help with cable management and buy a ball valve and plan on putting in a drain in the loop. so in case you need to service the loop for any reason you'll have a easy way to drain the loop without cutting a line or pulling a hose off and making a mess... just attach a fitting and hose the the drain valve, open the fill port, and kick open the valve while the hose is in a catch container and the system will drain with ease.
    Last edited by ATMA-WEAPON; 09-02-2019 at 02:30 PM.
    workstation rig
    Board: ASRock x399 Taichi
    Proc: AMD Ryzen ThreadRipper 1950x @ 4.05GHz
    Ram: 32GB G.Skill RipJaws DDR4-3600 @ 3200MHz (4x8GB)
    Vid: Nvidia GTX 1080 Founders Edition
    PSU: Silverstone Strider-P 1000w
    HDD/SSD: 960 Evo 500GB, Optane 900p 280GB U.2, 256GB M4, 600GB Vraptor, 4TB barracuda
    Cooling: koolance 280 rad, 240 rad, DDC pumps x2, full cover CPU and GPU blocks.
    Case: Corsair Vengeance C70 OD-Green

    Gaming rig
    Board: Asus ROG Maximus XI Hero (WiFi)
    Proc: Intel Core i9-9900KF @ 5.0GHz all cores
    RAM: 32GB G.Skill Trident Z Royal Silver DDR4-3600 (2x16GB)
    Vid: Nvidia RTX 2080 TI Founders Edition @ 2100MHz GPU 7000MHz mem
    PSU: EVGA SuperNova 1000G+
    SSD: 2x Samsung 970 EVO Plus 500GB M.2
    Cooling: Hardware Labs Blackice Nemesis L-Series Xtreme 480x54 rad, 360x54 rad, XSPC D5 pump/res, EKWB mono block and full cover GPU block, all fans in silent mode.
    Case: Lian Li PC-V3000

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •