Cooling 3 R9 390's....

[screwtech02]

Looking for some input/help with my cards. Currently have them on a Black Ice Stealth GT 360, dedicated loop, with a 355 pump, and push pull Geild fans. Using EK universal blocks, with a parallel bridge. During a gaming session (BF4) card temps will get to 80c. I'm thinking I need to do something with the fans (like get some that push over the current 52.4 cfm) Problem is, I have space issues in the top of the case, so slimline is gonna be a must.

Current Fans: http://gelidsolutions.com/products/i...=1&cid=2&id=84

Current Rad: http://www.frozencpu.com/products/23...c7C&mv_pc=1141



Was looking to go with these fans possibly : http://www.newegg.com/Product/Produc...12&ignorebbr=1

Or, do you think a diff rad, would be necessary?

Any input would be greatly appreciated.

[kolombo]

Try serial gpu rig. The flow in any gpu bloks will be higher then in parallel .

[systemviper]

yyea i think you would lower your first card temps then the second might be same as now, can you shoot a pic or two..

sounds like a nice rig

SV

[MeltedDuron]

hooly thread revival batman!

I'm sure screwtech has figured this out since posting two years ago but I'd have recommended getting Noctua fans on the rad for more static pressure-maybe the higher RPM industrial models. Or ditch the front fans and run some 38mm thick server fans in a pull configuration. Sunon's and Panaflo's aren't as loud as they look. it's more important to be pulling air through the rad than it is to have a lot of CFM in free air, it's a radiator not a case fan..

A 360 rad (especially a slim rad like a black ice) is a little undersized for three cards if you consider each GPU would only have a single 120mm rad worth of cooling area, so it needs all the airflow it can get.

[screwtech02]

Lol, I got rid of that case guys. Went to a 780T, and now a Enthoo Luxe, running a 360 push/pull, and a 200mm Rad in the front.

[screwtech02]

Here are the pics for my Phanteks build.

https://photos.app.goo.gl/nPaRJEHuR9Cczqxj7

[bluestang]

Love Phanteks cases. What GPUs are those 3?

Come help the team out crunching once in a while