Results 1 to 4 of 4

Thread: Are water cooled condensers possible?

  1. #1
    Registered User
    Join Date
    Apr 2018
    Location
    England
    Posts
    2

    Are water cooled condensers possible?

    Hi guys,

    I'm new to the forum. Hopefully this is the right section.

    Would it be possible to take a phase change unit, such as the retail LD PC-V2, and water cool the condenser element.
    Such as by replacing the condenser with a small heat exchanger, which is then connected to a conventional water cooling loop.

    I imagine this would reduce the noise and size of the system?

  2. #2
    Xtreme Owner Charles Wirth's Avatar
    Join Date
    Jun 2002
    Location
    Las Vegas
    Posts
    12,277
    Yes, a Lytron 10 ton brazed plate heat exchanger is kinda what you are looking for.
    I had a unit that I was trying to condense Iceon89 using a L2L, R507 was too easy.
    http://www.lytron.com/Heat-Exchanger...quid-to-Liquid
    I have never had a Lytron fail and I own a few in use now. It does help the capability of condensing the first stage but you will still need the L2A and fans, maybe you had other geothermal ideas?
    Last edited by Charles Wirth; 04-02-2018 at 01:03 PM.
    Intel 7960X ES @ 4.4Ghz
    ASUS Rampage VI Extreme
    GTX 1080ti Galax Hall of Fame
    32GB Galax Hall of Fame
    Intel Optane
    Platimax 1350W
    Enermax 240 Liqtech AIO

    Intel 8700K @ 5.2Ghz
    Asus Maximus X Apex
    GRX 1080ti Galax Hall of Fame
    16GB Galax Hall of Fame
    Intel Optane
    Platimax 1350W
    Enermax 240 Liqtech AIO

  3. #3
    Registered User
    Join Date
    Apr 2018
    Location
    England
    Posts
    2
    Thanks Charles!

    I've no experience in refrigeration myself, should I just take the stock unit to a local expert and ask them to fit the L2L and regas the unit? Do you know what refrigerant would be best?

    When you say I will still need the L2A and fans, do you mean the L2A will need to remain in place, so the refrigerant would run through the L2L, then through the L2A?

    Finally, in a single stage system such as the LD PC-V2, could one also connect the L2L to a chilled water loop to cool the hot side below ambient?
    Last edited by geobow; 04-03-2018 at 02:49 AM.

  4. #4
    Dothan FTW!
    Join Date
    Jun 2004
    Posts
    900
    Is littledevil still doing custom work? If so, you'd be best off getting him to build you something instead of buying a new unit and paying someone to rip it apart and modify it. I'm doubtful you'd improve on the noise levels or the size of the LD unit, but you could run heavier refrigerants with more cooling capacity on the condenser, as Charles has been doing, if these refrigerants are available to your builder.

    By the time you've connected a L2L condenser to a chiller (which would need to be able to handle the heat load of the unit as well as your CPU, so would have to be a massive chiller) you've pretty much built a cascade, using two HX's connected by coolant between the first and second stages instead of them sharing a heat exchanger. The refrigerant charge and metering of each unit would have to be tweaked to get this performing well, and you would have to wait for the chiller to get down to temp before powering on the second stage to get any real cooling out of it. It could work, but there are better ways of doing this.

    I'd recommend you look at some of the stunning cascades that have been built on this forum over the years if you're after more than you can get from a standard single stage.
    .:MeltedDuron:.
    HP z620 - 2x Xeon E5-2670 8c/16t - EVGA GTX780 SC - 48gb DDR3 ECC - Fusion ioDrive Duo 1.2TB - 256GB Samsung SSD - 120GB HyperX SSD - 2x FireCuda 2TB - HGST 4TB
    Deluxo - Xeon L5430 @ 3.6GHz (400*8) - Gigabyte G33M-DS2R - 2x2GB HyperX 6400 - 2x2GB OCZ PC6400 - XFX R7 260X - 256GB Firestorm SSD - Custom CPU loop - Stickerbombed Chilli Pro MATX case
    Jezabel - Athlon XP 2800+ Barton @ 2100 (200*10.5) - ATi FireGL X1 256MB - Asus A7N8X-E Dlx - 2x512MB OCZ EL PC3200 - OG Antec Case - Win98SE and Win2k
    .:Lemon Computers:.
    Abusing the Socket A platform since 2002

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •