Cpu-z shows Xmp setting under SpdOriginally Posted by aussie7
It's been a long time since I've had a go at overclocking, can you explain what XMP profile and Docp is ?
TIA
The bios Has auto oc And it has D.o.c.p
D.o.c.p Will oc system to reach Xmp on memory sticks
This mobo give me 234 fsb/ 280 is the same w/diff multi's
250 should give us 2000c9 on those sticks
Take note of sub timing when using docp
Last edited by Hell Hound; 02-21-2018 at 02:44 AM.
Are you talking about memory settings ?Cpu-z shows Xmp setting under Spd
The bios Has auto oc And it has D.o.c.p
D.o.c.p Will oc system to reach Xmp on memory sticks
This mobo give me 234 fsb/ 280 is the same w/diff multi's
250 should give us 2000c9 on those sticks
Take note of sub timing when using docp
I found the Xmp setting under Spd, where is D.o.c.p
cpu-z images
this is my current settings and passed 30mins of prime blend
Last edited by aussie7; 02-21-2018 at 05:56 AM.
In the bios A.i overclock tuner should say auto /manual /docp
D.o.c.p will have settings for jedec and xmp profiles
You can set d.o.c.p and still manually adjust the fsb and Cpu/Nb/HTT multi
Your XMP says 2T timing
Last edited by Hell Hound; 02-21-2018 at 09:43 AM.
Are you talking about this Ai Tweaker Screen ?
Under AI overclock tuner there the only option is auto or manual
okay,use Thaiphoon burner to see your sub timing(look for tut on reading mem sticks)
Maybe asus memtweakit will work on your mobo
Too loose of sub timing gives me errors
you mean the ram settings used in auto like in this screen ?
the black ones listed at the top of the page
this is my current memory settings
Last edited by aussie7; 02-22-2018 at 01:27 AM.
Yes those auto settings needs to be changed
cas write latency should not be lower than cas latency
AOD will tell you what bios set and let you change on the fly,but you need to know spd
Just pulled the ram out to get the info of it.
G.Skill 4gb
F3-2133C9D-8GXL
DDR-2133 CL9-11-11-31
1.6v - 1.65v
PC3 17000 4Gx2
Intel XMP Ready
I'm guessing the ram being Intel XMP Ready means the XMP doesn't work with AMD ?
Last edited by aussie7; 02-22-2018 at 11:30 PM.
You need D.o.c.p option or manually set your sticks.
Did you see modules on both sides of memory
Dl Thaiphoon burner to read you sticks spd settings
It should also tell you what type of sticks those are
Memory has heatspreaders on them, can't see the mem chips
I have set my memory settings manually as in pic above
Thaiphoon downloaded and pic bellow
Last edited by aussie7; 02-23-2018 at 04:33 AM.
Dram 2nd information is what you want to configure
Auto does not look like its the correct settings
new settings 2nd DRAM set to recommended settings
TRTP says 8
TRRD says 6
TWTR says 8
TWR says 16 start @ 12
Set TRFC to 300ns
Don't forget to set 2T TIMINGS
Last edited by Hell Hound; 02-23-2018 at 06:28 AM.
Thanks, but those timings are worse than what I had in the pic above, so I'm going back to what I had
This can affect your nb clocks your timing are tight but not gain perf
2.8 w/1866c9 is better than 2.6 1600c9 all day
Posting Permissions
Reply With Quote
Bookmarks