Results 1 to 3 of 3

Thread: Chilling Time!!!

  1. #1
    Registered User
    Join Date
    Nov 2017
    Posts
    3

    Chilling Time!!!

    Hi every one,

    Been looking around for one week but no dice, so here I am. I just finished buying all I needed for my water loop which will be hooked to a water chiller, it's a Hailea HC 1000A, every thing is set but tow informations are missing: how much fluid do I need for the chillers tank I've found nothing about its capacity and how do I fill the loop without ruining the pump (if it runs dry). Please help.

  2. #2
    Xtreme Owner Charles Wirth's Avatar
    Join Date
    Jun 2002
    Location
    Las Vegas
    Posts
    12,274
    Fill while the pump is off to the top, start the pump and leave the cap off the pump to let air escape. It will take 10 to 20 minutes to get most of the air bubbles purged, bang on the pump case and water lines to free up more trapped air.

    Add Water Wetter for better chilling performance. Water Wetter can be purchased at auto parts store.
    Last edited by Charles Wirth; 11-10-2017 at 10:03 AM.
    Intel 7960X ES @ 4.4Ghz
    ASUS Rampage VI Extreme
    GTX 1080ti Galax Hall of Fame
    32GB Galax Hall of Fame
    Intel Optane
    Platimax 1350W
    Enermax 240 Liqtech AIO

    Intel 8700K @ 5.2Ghz
    Asus Maximus X Apex
    GRX 1080ti Galax Hall of Fame
    16GB Galax Hall of Fame
    Intel Optane
    Platimax 1350W
    Enermax 240 Liqtech AIO

  3. #3
    Registered User
    Join Date
    Nov 2017
    Posts
    3
    Thanks a lot mate, it is the right way to do it and there is no other way. What made lose track is the incompetent fool from Highflows web site I was misled by his wrong informations telling me there will be no need for a reservoir or a pump. Anyway you helped a lot thank you sir ; )

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •