Results 1 to 5 of 5

Thread: HELP Computer shuts down / hard chrash

  1. #1
    Xtreme Enthusiast
    Join Date
    Aug 2008
    Posts
    727

    HELP Computer shuts down / hard chrash

    During timespy loop, the PSU trips off from what appears to be an overvolt protection. Watts at the wall (120v socket) hover around 890-1000W.

    PSU is SeaSonic 1200W (100AMP 12v)

    Rig in the signature.

    Only crashes when GPU's are overvolted to 1212mv and running 1200 core. When I run at stock speeds/clock, no crash.

    Processor is OC to 4.2 but HT is off.

    Am I pulling too much power through the PSU or is it faulty?
    Intel i7 980X
    12GB
    Asus P6X58
    GTX 780 TI x 3
    x2 Samsung 850Evo 500GB
    Windows 10 Pro 64


    Swiftech Apogee XL2
    Swiftech MCP35X
    Koolance GPU blocks
    360 x1, 240 x1, 120 x1 Radiator

  2. #2
    Join XS Boinc Team StyM's Avatar
    Join Date
    Mar 2006
    Location
    Tropics
    Posts
    12,332
    change your psu.
    based on this calculator http://outervision.com/power-supply-calculator your psu is not enough...

  3. #3
    Xtreme Enthusiast
    Join Date
    Aug 2008
    Posts
    727
    Quote Originally Posted by StyM View Post
    change your psu.
    based on this calculator http://outervision.com/power-supply-calculator your psu is not enough...
    But wall is only pulling 800-900 watts. Sometimes a little over 1000 but at ~%80-87 efficiency, that should only equate to 800-900 watts at the PSU, right? 100A 12v rail should be enough, no? What am I missing? I'm %100 with you that this is a PSU issue just not sure why these specs aren't enough (assuming the PSU isn't bad).

    That calculator says I need a 1500w supply
    Last edited by StAndrew; 03-05-2017 at 05:51 AM.
    Intel i7 980X
    12GB
    Asus P6X58
    GTX 780 TI x 3
    x2 Samsung 850Evo 500GB
    Windows 10 Pro 64


    Swiftech Apogee XL2
    Swiftech MCP35X
    Koolance GPU blocks
    360 x1, 240 x1, 120 x1 Radiator

  4. #4
    Xtreme Addict
    Join Date
    Jun 2007
    Posts
    230
    its seasonic psu should be capable of that. psu might be faulty. you can borrow same rated psu just to check if its does the same thing. just to rectify where the problem is........
    [FSB<>BCLK]
    3930k@4.6Ghz 1.38v Lapped~RIVGene
    Vengeance Pro 2x8gb @2400mhz 1.65v CL10
    850Evo~GTX 1060 strix
    AX1200i
    Sorry for my bad english

  5. #5
    Xtreme Enthusiast
    Join Date
    Aug 2008
    Posts
    727
    Quote Originally Posted by xpower View Post
    its seasonic psu should be capable of that. psu might be faulty. you can borrow same rated psu just to check if its does the same thing. just to rectify where the problem is........
    They run just fine in games and 3D Mark

    I looking to get a FSP BoosterX 450 W and run two GPU's on the two 8 pin connectors. That would offload up to 300W from the SEASONIC onto the BoosterX. The issue is the seller wanted $299... I got him to lower the price to $99 but that's a lot of money to "test" out the theory.

    Big issue is, if I get a new PSU, it has to be the same length or shorter. With a 240mm rad mounted on the bottom of the case, I have about 1mm space between the PSU and radiator.
    Intel i7 980X
    12GB
    Asus P6X58
    GTX 780 TI x 3
    x2 Samsung 850Evo 500GB
    Windows 10 Pro 64


    Swiftech Apogee XL2
    Swiftech MCP35X
    Koolance GPU blocks
    360 x1, 240 x1, 120 x1 Radiator

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •