Results 1 to 8 of 8

Thread: Msi godlike adventures

  1. #1
    Xtreme Addict
    Join Date
    Jun 2005
    Location
    NYC
    Posts
    1,911

    Msi godlike adventures

    this is just another living thread on my findings with this board




















    On my quest to be Lord of the Rings with this motherboard has been very interesting. Trying to get my 5930k to overclocking the same level on my Asus Rampage V is taking some getting used to. I tried do a normal overclock on the ring of about 4.5 gigahertz at 1.45 volts it did not let me boot I got locked to the point where I had to clear the BIOS 3x to get it to post again. I put the setting on auto and it post at around 1.456 volts so I tried to key that in manually but still it was a no-go I did some research and found I was to set ring around 1.3 and ring oc2 to around 1.4 ~1.45 24/7 use .

    Doing this I was able to post at 4.5 gigahertz CPU + 4.5 uncore did some stability tests and had to drop down to 44 uncore so now I wanted to dial in memory which led me to 3400mhz with gkill trident 3733mhz ram. The problem was I couldnt set uncore because I had to turn down the multipliers because of high bclk to I think around 26 and the auto value for that ring voltage was 1.2 something. I left ring auto and set ring oc to 1.45 and tried to boot it powered down turned back on and just would cycle from 04 to 60 on the post code. Long story short cpu damaged and killed a ram stick so not to get discouraged I tried another dd4 kit and it would randomly boot.

    My other 5930k was going into abother build so that was a no go. I said I needed another cpu and it can't be godlike without a 5960 so I picked one up and so far load tested it to 4.73Ghz @1.401v on auto I was happy as hell but said maybe it do at a lower voltage so I used command center to back down to 1.38 while on auto in the bios and voltage shot to 1.77volts in cpuz I never jumped out the chair so quickly lol but long I trust that this board needs a bios and I will not be able to test extreme ram clocks until new memory comes I'm at 3200mhz currently. So far adjusting cpu and uncore has not been a issue I do have replacement plan on cpu but due to the fact I never have gotten a sample this good I don't want to kill it yet lol.we shall see when memory comes what I'll do and I'll try to get in contact with msi about my bios issues. It's been up and running since













    was doing some voltage testing

















    still waiting on my gskill ram to come


















    Quote Originally Posted by msimax, post: 3461950, member: 16432
    stock single thread test






    multicore test






    heaven 4.0 at stock

    [QUOTE="msimax, post: 3462197, member: 16432"]some game tests at stock cpu and gpu's. would not have been possible without the new crimson 16.5.2.1 driver cfx is working properly


    rise of the tomb raider 1440p all max except textures on high










    starwars battlefront 1440p on ultra ranges from 43~68 fps




    the division 1440p all max except shadow quality on high and resolution scale at 100%

    Quote Originally Posted by msimax, post: 3461950, member: 16432
    stock single thread test




    Quote Originally Posted by msimax, post: 3490276, member: 16432
    overclock on the cpu



    overclocked cpu+gpu

    Quote Originally Posted by msimax, post: 3490319, member: 16432









    Quote Originally Posted by msimax, post: 3499653, member: 16432
    got my corsair ram back from rma

    looks to be low bin hynix afr, and still using bios 1.4 booting with hynix profiles leads to errors i have tried a beta bios 1.7
    which lets me boot all hynix profiles but stiil no go also the beta adds back ring 1 and ring 2 voltage but does not overclock .

    trcd trp needs to stay high or it'll start dropping channels I've found and i had as high as 3333mhz but only run error free with 2T . cas 11 is still a no go on this board but i just checked their website and the offical 1.7 is up so im off to test that





    Quote Originally Posted by msimax, post: 3500993, member: 16432
    pi no tweaks










    Quote Originally Posted by msimax, post: 3501574, member: 16432




    far cry primal 1440p hd textures on all max settings





    hitman 2016 1440p all max resolution scale 1.0
    the bench doesn't show results at the end just goes back to launch screen

    min 58 fps max 229 fps avg 79 fps


    Quote Originally Posted by msimax, post: 3464115, member: 16432
    testing out the magical 16.5.3 drivers using firestrike, system is overclocked gpus are still stock


    Quote Originally Posted by msimax, post: 3465165, member: 16432
    Quote Originally Posted by msimax, post: 3475573, member: 16432























    Quote Originally Posted by msimax, post: 3482196, member: 16432
    my ram came today

    Amd Nvidia/Ati -3dmark06 scorebord revisted

    asus L1N64-ws or /b depending on bios chip
    4x1gig 8500 gkill bpk
    2x opteron 8224 @ 3.8ghz
    http://www.xtremesystems.org/forums/...&postcount=236
    vga= 8800gt
    winxp pro

    custom chiller -31 water
    2x dtek fuzions
    bix3-with x3panaflo hi output
    antec 850 quattro

    heat under msimax abitmax and dfimax

  2. #2
    Xtreme Addict
    Join Date
    Jun 2005
    Location
    NYC
    Posts
    1,911
    Quote Originally Posted by msimax, post: 3505825, member: 16432
    the gods have shown favor to this mb bios 1.8 brings back ring clocking :laugh:

    ...
    Amd Nvidia/Ati -3dmark06 scorebord revisted

    asus L1N64-ws or /b depending on bios chip
    4x1gig 8500 gkill bpk
    2x opteron 8224 @ 3.8ghz
    http://www.xtremesystems.org/forums/...&postcount=236
    vga= 8800gt
    winxp pro

    custom chiller -31 water
    2x dtek fuzions
    bix3-with x3panaflo hi output
    antec 850 quattro

    heat under msimax abitmax and dfimax

  3. #3
    Xtreme Addict
    Join Date
    Jun 2005
    Location
    NYC
    Posts
    1,911
    copy pasted thread back
    Amd Nvidia/Ati -3dmark06 scorebord revisted

    asus L1N64-ws or /b depending on bios chip
    4x1gig 8500 gkill bpk
    2x opteron 8224 @ 3.8ghz
    http://www.xtremesystems.org/forums/...&postcount=236
    vga= 8800gt
    winxp pro

    custom chiller -31 water
    2x dtek fuzions
    bix3-with x3panaflo hi output
    antec 850 quattro

    heat under msimax abitmax and dfimax

  4. #4
    Xtreme Addict
    Join Date
    Jun 2005
    Location
    NYC
    Posts
    1,911
    godlike still kicking around




    2018-10-06 19_26_55-Greenshot.jpg
    Attached Images Attached Images
    Amd Nvidia/Ati -3dmark06 scorebord revisted

    asus L1N64-ws or /b depending on bios chip
    4x1gig 8500 gkill bpk
    2x opteron 8224 @ 3.8ghz
    http://www.xtremesystems.org/forums/...&postcount=236
    vga= 8800gt
    winxp pro

    custom chiller -31 water
    2x dtek fuzions
    bix3-with x3panaflo hi output
    antec 850 quattro

    heat under msimax abitmax and dfimax

  5. #5
    Xtreme Owner Charles Wirth's Avatar
    Join Date
    Jun 2002
    Location
    Las Vegas
    Posts
    12,256
    Decent memory, thanks for sharing.

    I still have my 6950X on Rampage E10
    Intel 7960X ES @ 4.4Ghz
    ASUS Rampage VI Extreme
    GTX 1080ti Galax Hall of Fame
    32GB Galax Hall of Fame
    Intel Optane
    Platimax 1350W
    Enermax 240 Liqtech AIO

    Intel 8700K @ 5.2Ghz
    Asus Maximus X Apex
    GRX 1080ti Galax Hall of Fame
    16GB Galax Hall of Fame
    Intel Optane
    Platimax 1350W
    Enermax 240 Liqtech AIO

  6. #6
    Xtreme Addict
    Join Date
    Jun 2005
    Location
    NYC
    Posts
    1,911
    Quote Originally Posted by Charles Wirth View Post
    Decent memory, thanks for sharing.

    I still have my 6950X on Rampage E10
    thanks man

    any tips on clocking uncore read a bunch of voltage horror stories and cant get clear info on Vccu specs
    also overclocking blck over 100 results in failed oc bootup
    Amd Nvidia/Ati -3dmark06 scorebord revisted

    asus L1N64-ws or /b depending on bios chip
    4x1gig 8500 gkill bpk
    2x opteron 8224 @ 3.8ghz
    http://www.xtremesystems.org/forums/...&postcount=236
    vga= 8800gt
    winxp pro

    custom chiller -31 water
    2x dtek fuzions
    bix3-with x3panaflo hi output
    antec 850 quattro

    heat under msimax abitmax and dfimax

  7. #7
    Xtreme Owner Charles Wirth's Avatar
    Join Date
    Jun 2002
    Location
    Las Vegas
    Posts
    12,256
    I will check, I still have the machine.
    Intel 7960X ES @ 4.4Ghz
    ASUS Rampage VI Extreme
    GTX 1080ti Galax Hall of Fame
    32GB Galax Hall of Fame
    Intel Optane
    Platimax 1350W
    Enermax 240 Liqtech AIO

    Intel 8700K @ 5.2Ghz
    Asus Maximus X Apex
    GRX 1080ti Galax Hall of Fame
    16GB Galax Hall of Fame
    Intel Optane
    Platimax 1350W
    Enermax 240 Liqtech AIO

  8. #8
    Xtreme Addict
    Join Date
    Jun 2005
    Location
    NYC
    Posts
    1,911
    thanks
    Amd Nvidia/Ati -3dmark06 scorebord revisted

    asus L1N64-ws or /b depending on bios chip
    4x1gig 8500 gkill bpk
    2x opteron 8224 @ 3.8ghz
    http://www.xtremesystems.org/forums/...&postcount=236
    vga= 8800gt
    winxp pro

    custom chiller -31 water
    2x dtek fuzions
    bix3-with x3panaflo hi output
    antec 850 quattro

    heat under msimax abitmax and dfimax

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •