I am trying to build a WC loop on my 750D and i have come up with 5 possible setups, WCA - WCE.

You will notice that i am using quite a bit of quick disconnects (QDCs). this is because I once had a very bad experience with a big name brand and I had to keep dismantling the PC for RMAs. so I like to isolate major components easily for troubleshooting or replacement. I know this adds cost and restriction.

Tubing used is ID 1/2" OD 3/4".
asus maximus Iv gene z with ek CPU and mosfet blocks.
MSI r9 290x with aquacomputers waterblock
radiator: swiftech mcr320 qp res. (I am getting another 240mm if needed)
bay res: Yet to purchase.


1. for WCA and WCB.jpg, the radiator will be an external 9x120mm (1080) radiator connected to panel mounted QDCs and on the other end of these panel mounted QDCs, it is a g1/4 thread so i need to attach fittings for it. Since the existing holes for tubings on the casing is very near to the GPU, mounting another QDCs on the other end is impossible. so the gpu waterblock will be tethered to it in a way.

WCA : external radiator. Pump internal and standalone
WCB: external radiator. Pump can be a bay res-pump combo or attached to the external rad.
WCC. external radiator. Pump can be a bay res-pump combo or attached to the external rad.
WCD Internal radiator, bay res - pump combo.
WCE. internal radiator, standalone pump.



http://img.photobucket.com/albums/v215/tarui/WCA.jpg

A. Pump -> cpu -> mosfet -> bay res -> GPU -> external rad

http://img.photobucket.com/albums/v215/tarui/WCB.jpg

B. res-pump -> CPU -> mosfet (90deg fittings) -> gpu -> external rad
OR
rad- pump -> bay res -> CPU -> mosfet (90deg fittings) -> gpu

http://img.photobucket.com/albums/v215/tarui/WCC.jpg

C. res-pump -> cpu -> mosfet -> external rad -> gpu
OR

res-> cpu -> mosfet -> external rad -> pump -> gpu

http://img.photobucket.com/albums/v215/tarui/WCD.jpg

D. res-pump -> cpu -> mosfet -> 240mm rad -> gpu -> 360mm rad
Blue lines and dots are indicating where the 45deg fittings are placed.

http://img.photobucket.com/albums/v215/tarui/WCE.jpg

E. pump -> cpu -> mosfet -> 240mm rad -> gpu -> 360mm rad -> res

Thank you and please let me know if you have any questions.