i did buy a vapochiller the first case it was one of the first models i got the heaters he told me to use this forums to ask for the software and get some links to use my vapochiller in a homebuilt water thank and electronics was not cheap.
i have a asrock 980de3usb3 it sucks i think its my board i had a 990fx sabertooth it was blazing fast did turn my ram to 2400mhz i am thinking to use my am3 board and watercool it try to use my fx8150 to death and if it works i watercool chipset and use heaters cream inside socket scary i will build socket holder my self for am3 i need som help
software was found http://support.asetek.com/index.php?...pcid=5&nav=0,5
hi,
I uses an atx power supply and no you do not need to use 2 mother boards just the one in the case as for the power switch it goes to the reset header on the mother board. When I was using the system it was working on windows XP but it did work on windows 7 32bit not sure about 64bit as I never had windows 64bit. As for the software then I no longer have it as it was on the hard disk that was sold a year ago. What people are doing with them is cooling the water tank using a vapour chill to cool the water instead of the cpu and using a water cooled solution and having the chiller cool the water externally. But again I have to mention that this item is very technical and you are required to use your own electrical knowledge to set it up or design how you want it to work. Go on the vaporchill forums there is a large amount of knowledge there. Its going to take a few hours to set this up it took me weeks to get it right when I did it 6 years ago.
Kind Regards
//\//\ ......
i also want to use dosbox serial usb thing and have own psu for vapo
thank you is it possible to get Evap Clam Shells like this one http://www.xtremesystems.org/forums/...sulation-Guide for fm2 i stick to it if i dont use ddr4 i even witch to lga2011
i know gand vgs got cnc machine i think i can order company to cut head off i also think i can buy frozencpu socket kit to mount head on vapo cut the plastic what you think
if i cnc cut it autocad order cm etc can i insulate it if i dont have good socket holder to screws i put trough a hole. any flexible materials i can handshape? i think i can use window isolation but it will be under screws i was thinking to use a metal ring and bolt it to head on 2 sides use metal roll to put trough holes and twist my hand under to harden is and use that windows isolation around head should be cool to 30-40 minus 60c i also had this idea to use a mini itx board with an add2psu or a triple adapter to turn on computer turn on other psu turn on mini itx like intel little falls or a via with a serial connector to it and it boot to dos vapochill with a vga to hdmi adapter to adjust vapo or like backup board dos can go to all masstorage ahci driverless and run app to serialport i think it work i do not have floppyimage cd
Bookmarks