OCN2
Page 6 of 10 FirstFirst ... 3456789 ... LastLast
Results 126 to 150 of 244

Thread: ASUS X99 Motherboard Series - Official Support Thread

  1. #126
    Xtreme Member
    Join Date
    Jan 2007
    Posts
    494
    doing RMA and if thats not working then refund

  2. #127
    Xtreme X.I.P.
    Join Date
    Feb 2006
    Posts
    2,745
    Check temps and make sure the pump is spinning at full speed. That's all the debugging I can help you with from here.
    ASUS North America Technical Marketing - If you are based outside North America and require technical assistance or have a query please contact ASUS Support for your region.


    Rampage IV Extreme tweaking guide

    ASUS Z77 UEFI Tuning Guide for overclocking

    Maximus 5 Gene OC Guide

    Maximus VI Series UEFI OC Guide

  3. #128
    Xtreme Member
    Join Date
    Jan 2007
    Posts
    494
    temps idle 37c max 65c, need to find how to check the pump speed.

  4. #129
    Xtreme Owner Charles Wirth's Avatar
    Join Date
    Jun 2002
    Location
    Las Vegas
    Posts
    12,324
    Hi Rusty,

    I think it is your ram. break it down to one stick of ram installed closest to the rear panel.

    Test each stick
    Intel 9990XE @ 5.1Ghz
    ASUS Rampage VI Extreme Omega
    GTX 2080 ti Galax Hall of Fame
    64GB Galax Hall of Fame
    Intel Optane
    Platimax 1245W

    Intel 3175X
    Asus Dominus Extreme
    GRX 1080ti Galax Hall of Fame
    96GB Patriot Steel
    Intel Optane 900P RAID

  5. #130
    Xtreme Member
    Join Date
    Jan 2007
    Posts
    494
    Quote Originally Posted by FUGGER View Post
    Hi Rusty,

    I think it is your ram. break it down to one stick of ram installed closest to the rear panel.

    Test each stick
    Thank You Fugger, I'll try that. What do you use to test your ddr4 ?

  6. #131
    Xtreme X.I.P.
    Join Date
    Feb 2006
    Posts
    2,745
    Set Q-Fan control to disabled on the header the pump is connected to. This will run the pump at full speed. Make sure you are not using the pump with a fan on the CPU and CPU OPT headers (if the pump is on the OPT header).

    As you are already passing Memtest with quad channel, I think it will be tough for you to nail down any memory instability with a single module.
    ASUS North America Technical Marketing - If you are based outside North America and require technical assistance or have a query please contact ASUS Support for your region.


    Rampage IV Extreme tweaking guide

    ASUS Z77 UEFI Tuning Guide for overclocking

    Maximus 5 Gene OC Guide

    Maximus VI Series UEFI OC Guide

  7. #132
    Xtreme Addict
    Join Date
    Sep 2010
    Location
    US, MI
    Posts
    1,678
    @rusty
    Try like Raja said, use only 1 stick of ram, drop the speed down to 2133.

    AND.. maybe try vmem at 1.3v, that isn't to high I think, just because ddr4 is spec'ed at 1.2v, doesn't mean it prefers it, it'll probably need more for 2800mhz anyways.

    1.35v is probably the starting point I would think...

    One more thing, if you installed windows or whatever os you have while you were unstable, you might not beable to get it stable afterwards even if you fix the bios settings.
    Always start low and safe, verify it's stable before you clock up.


    Anyways listen to these guys here, they can probably help you sort it out but you have to actually listen.
    2800mhz mem isn't stock you know..., even if the ram is rated for it.
    Last edited by NEOAethyr; 09-25-2014 at 01:08 AM.


    CPU: Intel Core i7-4930k [3332B054]
    CPU Heatsink: NZXT Kraken X60
    Mobo: ASUS Rampage IV Black Edition (0507 BIOS)
    MEM: 4x 4gig G.Skill [F3-2400C9Q-16GTXD] (Dual Sidded Samsung of Some Sorts)
    PSU: Antec HCP-850 Platinum
    VGA: nVidia Grid VGX K2 (WIP with 2x 680 lightnings)
    Monitor: ASUS VG278HE & 3DVision2 Kit
    Drives: 2x WD Red 2TB Drives [WDBMMA0020HNC-NRSN] (RAID 0), Corsair Force Series 3 CSSD-F60GB3A-BK 60GB SATA3 SSD, Pioneer BDR-2208 Blue Ray Burner
    Case: Rosewill Blackhawk Ultra
    OS's: Windows 2003 Enterprise x86 SP2-R2 VLM, Windows 7 Standard Embedded x86 SP1 EVL (128GB Patched), Windows 7 Standard Embedded x64 SP1 EVL
    Mouse: Using generic mouse for now...
    Arm:Samsung Galaxy S IV i9500 Octo-Core Quad Band 16gb Unlocked and 2x 64gig sd cards
    777

    Sig is slightly out of date, I'll update it later ^^


  8. #133
    Xtreme Member
    Join Date
    Jan 2007
    Posts
    494
    Quote Originally Posted by Raja@ASUS View Post
    Set Q-Fan control to disabled on the header the pump is connected to. This will run the pump at full speed. Make sure you are not using the pump with a fan on the CPU and CPU OPT headers (if the pump is on the OPT header).

    As you are already passing Memtest with quad channel, I think it will be tough for you to nail down any memory instability with a single module.
    Thanks Raja I'm trying that so far no difference

  9. #134
    Xtreme X.I.P.
    Join Date
    Feb 2006
    Posts
    2,745
    Check event viewer for error logs when the resets occur.
    ASUS North America Technical Marketing - If you are based outside North America and require technical assistance or have a query please contact ASUS Support for your region.


    Rampage IV Extreme tweaking guide

    ASUS Z77 UEFI Tuning Guide for overclocking

    Maximus 5 Gene OC Guide

    Maximus VI Series UEFI OC Guide

  10. #135
    Xtreme Member
    Join Date
    Jan 2007
    Posts
    494
    Quote Originally Posted by Raja@ASUS View Post
    Check event viewer for error logs when the resets occur.
    I will look into that but tomorrow rma is going out cause shipping label was created already.

  11. #136
    Xtreme X.I.P.
    Join Date
    Feb 2006
    Posts
    2,745
    Okay, good luck.
    ASUS North America Technical Marketing - If you are based outside North America and require technical assistance or have a query please contact ASUS Support for your region.


    Rampage IV Extreme tweaking guide

    ASUS Z77 UEFI Tuning Guide for overclocking

    Maximus 5 Gene OC Guide

    Maximus VI Series UEFI OC Guide

  12. #137
    XIP
    Join Date
    Nov 2004
    Location
    NYC
    Posts
    5,580
    Testing 4X8GB with high uncore, cpu cold


  13. #138
    Xtreme X.I.P.
    Join Date
    Feb 2006
    Posts
    2,745
    Good result Dumo
    ASUS North America Technical Marketing - If you are based outside North America and require technical assistance or have a query please contact ASUS Support for your region.


    Rampage IV Extreme tweaking guide

    ASUS Z77 UEFI Tuning Guide for overclocking

    Maximus 5 Gene OC Guide

    Maximus VI Series UEFI OC Guide

  14. #139
    Xtreme X.I.P.
    Join Date
    Feb 2006
    Posts
    2,745
    Watercooled 4647MHz CPU and Cache. DDR4-3305 1T 2 hours of Realbench (2X570s)


    ASUS North America Technical Marketing - If you are based outside North America and require technical assistance or have a query please contact ASUS Support for your region.


    Rampage IV Extreme tweaking guide

    ASUS Z77 UEFI Tuning Guide for overclocking

    Maximus 5 Gene OC Guide

    Maximus VI Series UEFI OC Guide

  15. #140
    Xtreme Enthusiast
    Join Date
    Nov 2003
    Posts
    786
    I seem to have a very good 5820k on a X99 deluxe, can boot and windows stable at 4.9-5ghz and games for hours at 4.8ghz (even IBT stable for 10 passes of very high) but it crashes in realbench and x264 stress test at 4.7ghz. This is a problem for me because I upgraded largely to do x264 encoding lol.

    I keep getting 124 and 101 BSODs which are usually vcore, but I truly don't believe it is because there is no difference between 1.32 and 1.4v for stability. Maybe a little more vcore helps slightly. Here are my settings that I cannot get stable:

    4.7ghz
    1.3 - 1.4v

    PCHIO 1.625
    VCCIO 1.2
    CPU Cache 1.23125
    pch core 1.2
    vccio cpu 1.2
    CPU Input voltage: 2.15

    Optimized cpu phase power control
    140% cpu current capability
    Auto cpu vrm switching frequency
    CPU llc 9

    Have tried with LLC on auto as well as manually levels 8 and 9, seems to make no difference.

    Temps are great, have a nice water setup. Never hits 80c in x264 or realbench.

    VRM temps are getting hot, around 78-80c.

    I am totally out of ideas, is it the board? Should I return it and get the Rampage? I really want 4.8ghz stable for 24/7 use.
    Last edited by computerpro3; 09-25-2014 at 05:54 PM.
    3770k @ 5ghz 1.35v linx stable
    Asus Maximus V Extreme
    8gb Samsung Green @ 2600mhz 11-11-11-31
    EVGA GTX 680
    Corsair AX850
    XSPC Watercooling

  16. #141
    XIP
    Join Date
    Nov 2004
    Location
    NYC
    Posts
    5,580
    5930K retail uncore testing, TT W3U on cpu

    4Ghz 1.2V




    4.5Ghz 1.28V

    Last edited by Dumo; 09-26-2014 at 12:20 AM.

  17. #142
    I am Xtreme
    Join Date
    Jul 2007
    Location
    Montevideo - Uruguay
    Posts
    5,435
    Quote Originally Posted by Dumo View Post
    5930K retail uncore testing, TT W3U on cpu

    4Ghz 1.2V




    4.5Ghz 1.28V

    OMG those are amazing results my friend !!!
    24/7 - 5930K 46.5HT + ASUS R5E + DDR4 4x4GB 3100C15 1T + 2x 1TB SSD + 1x 3TB HDD + 4 SLI GALAXY GTX780 HOF + SEASONIC P-1200 all Water Cooled

    TRig - 4770KHT + ASUS M6E + GeIL 2x8GB 2666CL11 + GeiL Zenith 240GB SSD + GALAXY 750Ti HOF + CM 1200W + Raijintek Triton Liquid Cooler

  18. #143
    Xtreme X.I.P.
    Join Date
    Feb 2006
    Posts
    2,745
    Quote Originally Posted by computerpro3 View Post
    I seem to have a very good 5820k on a X99 deluxe, can boot and windows stable at 4.9-5ghz and games for hours at 4.8ghz (even IBT stable for 10 passes of very high) but it crashes in realbench and x264 stress test at 4.7ghz. This is a problem for me because I upgraded largely to do x264 encoding lol.

    I keep getting 124 and 101 BSODs which are usually vcore, but I truly don't believe it is because there is no difference between 1.32 and 1.4v for stability. Maybe a little more vcore helps slightly. Here are my settings that I cannot get stable:

    4.7ghz
    1.3 - 1.4v

    PCHIO 1.625
    VCCIO 1.2
    CPU Cache 1.23125
    pch core 1.2
    vccio cpu 1.2
    CPU Input voltage: 2.15

    Optimized cpu phase power control
    140% cpu current capability
    Auto cpu vrm switching frequency
    CPU llc 9

    Have tried with LLC on auto as well as manually levels 8 and 9, seems to make no difference.

    Temps are great, have a nice water setup. Never hits 80c in x264 or realbench.

    VRM temps are getting hot, around 78-80c.

    I am totally out of ideas, is it the board? Should I return it and get the Rampage? I really want 4.8ghz stable for 24/7 use.
    More likely the CPU. We don't always get what we want frequency wise from a CPU in all applications. Looking at the voltages being used that CPU is being hammered with all sorts.

    Do you really need VCCIN at 2.15 for example?

    Probably needs more Vcore for encoding - up to you of you want to do that. Personally I'd run the CPU where it's comfortable and not stretch it too far.
    Last edited by Raja@ASUS; 09-26-2014 at 01:05 AM.
    ASUS North America Technical Marketing - If you are based outside North America and require technical assistance or have a query please contact ASUS Support for your region.


    Rampage IV Extreme tweaking guide

    ASUS Z77 UEFI Tuning Guide for overclocking

    Maximus 5 Gene OC Guide

    Maximus VI Series UEFI OC Guide

  19. #144
    Xtreme Owner Charles Wirth's Avatar
    Join Date
    Jun 2002
    Location
    Las Vegas
    Posts
    12,324
    Some numbers



    Intel 9990XE @ 5.1Ghz
    ASUS Rampage VI Extreme Omega
    GTX 2080 ti Galax Hall of Fame
    64GB Galax Hall of Fame
    Intel Optane
    Platimax 1245W

    Intel 3175X
    Asus Dominus Extreme
    GRX 1080ti Galax Hall of Fame
    96GB Patriot Steel
    Intel Optane 900P RAID

  20. #145
    Xtreme X.I.P.
    Join Date
    Feb 2006
    Posts
    2,745
    Nice!
    ASUS North America Technical Marketing - If you are based outside North America and require technical assistance or have a query please contact ASUS Support for your region.


    Rampage IV Extreme tweaking guide

    ASUS Z77 UEFI Tuning Guide for overclocking

    Maximus 5 Gene OC Guide

    Maximus VI Series UEFI OC Guide

  21. #146
    I am Xtreme FlanK3r's Avatar
    Join Date
    May 2008
    Location
    Czech republic
    Posts
    6,796
    Awesome DRAM clocks+timings Charles!
    ROG Power PCs - Intel and AMD
    CPUs:i9-7900X, i9-9900K, i7-6950X, i7-5960X, i7-8086K, i7-8700K, 4x i7-7700K, i3-7350K, 2x i7-6700K, i5-6600K, R7-2700X, 4x R5 2600X, R5 2400G, R3 1200, R7-1800X, R7-1700X, 3x AMD FX-9590, 1x AMD FX-9370, 4x AMD FX-8350,1x AMD FX-8320,1x AMD FX-8300, 2x AMD FX-6300,2x AMD FX-4300, 3x AMD FX-8150, 2x AMD FX-8120 125 and 95W, AMD X2 555 BE, AMD x4 965 BE C2 and C3, AMD X4 970 BE, AMD x4 975 BE, AMD x4 980 BE, AMD X6 1090T BE, AMD X6 1100T BE, A10-7870K, Athlon 845, Athlon 860K,AMD A10-7850K, AMD A10-6800K, A8-6600K, 2x AMD A10-5800K, AMD A10-5600K, AMD A8-3850, AMD A8-3870K, 2x AMD A64 3000+, AMD 64+ X2 4600+ EE, Intel i7-980X, Intel i7-2600K, Intel i7-3770K,2x i7-4770K, Intel i7-3930KAMD Cinebench R10 challenge AMD Cinebench R15 thread Intel Cinebench R15 thread

  22. #147
    Quote Originally Posted by LardArse View Post
    i think you are asking the wrong person about safety limits, but

  23. #148
    XIP
    Join Date
    Nov 2004
    Location
    NYC
    Posts
    5,580
    More test


  24. #149
    playing playing and playing, training training gave me 43/43 C10 nice job asus, 5035 uncore incoming later



    Quote Originally Posted by LardArse View Post
    i think you are asking the wrong person about safety limits, but

  25. #150
    Xtreme X.I.P.
    Join Date
    Feb 2006
    Posts
    2,745
    Very nice Hiwa.
    ASUS North America Technical Marketing - If you are based outside North America and require technical assistance or have a query please contact ASUS Support for your region.


    Rampage IV Extreme tweaking guide

    ASUS Z77 UEFI Tuning Guide for overclocking

    Maximus 5 Gene OC Guide

    Maximus VI Series UEFI OC Guide

Page 6 of 10 FirstFirst ... 3456789 ... LastLast

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •