Really good results, similar to my Corsair LPX top end.
You are showing a really low uncore speed, that board/chip should do 4.5Ghz without touching voltages.
Intel 9990XE @ 5.1Ghz
ASUS Rampage VI Extreme Omega
GTX 2080 ti Galax Hall of Fame
64GB Galax Hall of Fame
Intel Optane
Platimax 1245W
Intel 3175X
Asus Dominus Extreme
GRX 1080ti Galax Hall of Fame
96GB Patriot Steel
Intel Optane 900P RAID
For those of you looking at memory access times between two points here's a quick sheet showing which will access faster. Just enter Mem Freq and CAS:
https://docs.google.com/spreadsheets...it?usp=sharing
This does assume that all other timings remain static and are not increased more than 1 clock for every ~ DDR4 200MHz frequency hike.
Also, excludes any IO buffer delays, however, WCL should auto adjust with CAS in UEFI and bring the RTL value down accordingly.
ASUS North America Technical Marketing - If you are based outside North America and require technical assistance or have a query please contact ASUS Support for your region.
Rampage IV Extreme tweaking guide
ASUS Z77 UEFI Tuning Guide for overclocking
Maximus 5 Gene OC Guide
Maximus VI Series UEFI OC Guide
Just confirming that in order to run DDR4 2800 you have to use base clock adjustment?
Something is disagreeing with base clock ~128Mhz. Can't figure it out.
- i7 5820K | Asus X99 Deluxe | 16GB Corsair Vengeance LPX | eVGA GTX 970 SC SLI | Asus PB278Q | 250GB Samsung 840 | 11TB HDD Storage | Steel Series Rival & QcK+ | Razer Orbweaver & Black Widow Ultimate '14 | Corsair RM1000W | Win 8.1 -
- Ek Supremacy Nickel | Alphacool NexXxos UT60 360MM | Coolgate UHE 360MM | Bitspower Water Tank Z-Multi 150 | EK D5 CSQ Top | Alphacool VPP D5 | Corsair SP120 HP's | Corsair 900D | Xbox One & PS4 | Sharp Aquos Q 60" | Astro A50 -
~ Gone but never forgotten: Xtreme Legend - Hallowed Point - Enthusiast - Bencher - Friend ~
Hey Praz, thanks for the reply. I should have elaborated on my question.
Can I run at 45 x 100 while still keeping the Ram @ DDR2800? I've tried setting it this way but it goes into a boot loop.
Seems the only way that works is XMP, but I encounter bios error codes for PCI/AMI/NVRAM on boot.... which is due to a device not handling the higher base clock correct?
It was testing for a little while then crashed and I got those errors. 61,67, 6b? or bd? , 9f, 96 are the bios codes I was getting.
Last edited by Chr0n1c; 10-18-2014 at 06:02 PM.
- i7 5820K | Asus X99 Deluxe | 16GB Corsair Vengeance LPX | eVGA GTX 970 SC SLI | Asus PB278Q | 250GB Samsung 840 | 11TB HDD Storage | Steel Series Rival & QcK+ | Razer Orbweaver & Black Widow Ultimate '14 | Corsair RM1000W | Win 8.1 -
- Ek Supremacy Nickel | Alphacool NexXxos UT60 360MM | Coolgate UHE 360MM | Bitspower Water Tank Z-Multi 150 | EK D5 CSQ Top | Alphacool VPP D5 | Corsair SP120 HP's | Corsair 900D | Xbox One & PS4 | Sharp Aquos Q 60" | Astro A50 -
~ Gone but never forgotten: Xtreme Legend - Hallowed Point - Enthusiast - Bencher - Friend ~
Hello
Those are memory related errors. 2800MHz memory speed using the 125 strap will result in DMI, PCIe and so on at only slightly more than 100MHz. You may need to adjust VCCSA to get past those errors. 2800MHz on the 100 strap can be done but depending on the CPU may require quite a bit of tuning and will most likely result in higher voltages than the same memory speed with the 125 strap.
moorhen2 what are the ram volts ?
- i7 5820K | Asus X99 Deluxe | 16GB Corsair Vengeance LPX | eVGA GTX 970 SC SLI | Asus PB278Q | 250GB Samsung 840 | 11TB HDD Storage | Steel Series Rival & QcK+ | Razer Orbweaver & Black Widow Ultimate '14 | Corsair RM1000W | Win 8.1 -
- Ek Supremacy Nickel | Alphacool NexXxos UT60 360MM | Coolgate UHE 360MM | Bitspower Water Tank Z-Multi 150 | EK D5 CSQ Top | Alphacool VPP D5 | Corsair SP120 HP's | Corsair 900D | Xbox One & PS4 | Sharp Aquos Q 60" | Astro A50 -
~ Gone but never forgotten: Xtreme Legend - Hallowed Point - Enthusiast - Bencher - Friend ~
what is vccsa called on this mobo, cause I don't see it.
I can't for the life of me get an adaptive overclock going. No matter what I do my clock and voltage stays pinned at the specified core ratio in bios...
What I'm *trying* to achieve is: My cpu will run at 4.4GHz under any kind of load on all, but when it's idling drops down to low voltage and clock...
What am I missing here? I have SpeedStep, Turbo, and C States all enabled, I've set my voltage to adaptive with an offset... Ugh...
Core i7 990x @ 4665MHz 30x155.5 | ASUS Rampage 3 Extreme 1601 Modded BIOS | 24GB (6x4GB) Mushkin Redline 999057 @ 1866MHz 8-8-8-24-1T
2x MSI N770-2GD5/OC SLI Custom BIOS @ 1228/7464 | Samsung 840 EVO 1TB | 4x 3TB WD Red Raid 5 | Corsair RM1000 | 2x Dell SP2309W 2048x1152
H2O Cooled | EK - Supreme HF Full Gold - FB RE3 | Swiftech - MCP35x2 - MCRes Micro v2 | HWLabs - 2x GTX 120 - GT Stealth 120
7x Gentle Typhoon AP-0A 2150RPM | 1x Enermax Magma UC-MA12 1500RPM | Lian Li PC-A10B | 5GHz Gulftown
It's working as intended with those settings.
If you want your overclock to be at 4.4Ghz all the time you will need to disable EIST and CPU power saving states, although that kind of defeats the purpose of using adaptive mode.
Also, if you're using Windows 7 or higher, you will need to select the 'high performance' power plan in Windows.
Review PC
AsRock Z68 Extreme 4 | 2600K @4.8GHz 1.35V | 2x 2GB GEIL Ultraline 2133MHz @ 1600Mhz 7.7.7.24 | ATi 5770 Vapor X | OCZ RevoDrive X2 240GB | OCZ Vertex 3 240GB | RealSSD C300 128GB | OCZ Vertex 2 100GB | 2x Samsung F3 1TB | Enermax Liberty 620W | Antec 900
That's the thing, it's not downclocking. I do have my windows set to high performance and I have minimum state at 10% and max at 100%... Still no scaling. It's behaving as if eist/c states/turbo are set to off in bios...
It's NOT behaving correctly. I got this working on SB-E without an issue...
Core i7 990x @ 4665MHz 30x155.5 | ASUS Rampage 3 Extreme 1601 Modded BIOS | 24GB (6x4GB) Mushkin Redline 999057 @ 1866MHz 8-8-8-24-1T
2x MSI N770-2GD5/OC SLI Custom BIOS @ 1228/7464 | Samsung 840 EVO 1TB | 4x 3TB WD Red Raid 5 | Corsair RM1000 | 2x Dell SP2309W 2048x1152
H2O Cooled | EK - Supreme HF Full Gold - FB RE3 | Swiftech - MCP35x2 - MCRes Micro v2 | HWLabs - 2x GTX 120 - GT Stealth 120
7x Gentle Typhoon AP-0A 2150RPM | 1x Enermax Magma UC-MA12 1500RPM | Lian Li PC-A10B | 5GHz Gulftown
Anyone got a 5960x batch L418C675 on this board ? interested in results
TJ07 | Corsair HX1000W | Gigabyte EX58 Extreme | i7 930 @ 4ghz | Ek Supreme | Thermochill PA 120.3 | Laing DDC 12v w/ mod plexi top | 3x2gb Corsair 1600mhz | GTX 680 | Raid 0 300gb Velociraptor x 2 | Razer Lachesis & Lycosa | Win7 HP x64 | fluffy dice.
Anyone experiencing cold boot problems? Stable at 4.5Ghz all day long but then after the system sits powered off for a long period and is booted up the bios reports the OC has failed.
Input/help is much appreciated.
- i7 5820K | Asus X99 Deluxe | 16GB Corsair Vengeance LPX | eVGA GTX 970 SC SLI | Asus PB278Q | 250GB Samsung 840 | 11TB HDD Storage | Steel Series Rival & QcK+ | Razer Orbweaver & Black Widow Ultimate '14 | Corsair RM1000W | Win 8.1 -
- Ek Supremacy Nickel | Alphacool NexXxos UT60 360MM | Coolgate UHE 360MM | Bitspower Water Tank Z-Multi 150 | EK D5 CSQ Top | Alphacool VPP D5 | Corsair SP120 HP's | Corsair 900D | Xbox One & PS4 | Sharp Aquos Q 60" | Astro A50 -
~ Gone but never forgotten: Xtreme Legend - Hallowed Point - Enthusiast - Bencher - Friend ~
nevermind, i had CPU SVID disabled. woops. All working now.
Core i7 990x @ 4665MHz 30x155.5 | ASUS Rampage 3 Extreme 1601 Modded BIOS | 24GB (6x4GB) Mushkin Redline 999057 @ 1866MHz 8-8-8-24-1T
2x MSI N770-2GD5/OC SLI Custom BIOS @ 1228/7464 | Samsung 840 EVO 1TB | 4x 3TB WD Red Raid 5 | Corsair RM1000 | 2x Dell SP2309W 2048x1152
H2O Cooled | EK - Supreme HF Full Gold - FB RE3 | Swiftech - MCP35x2 - MCRes Micro v2 | HWLabs - 2x GTX 120 - GT Stealth 120
7x Gentle Typhoon AP-0A 2150RPM | 1x Enermax Magma UC-MA12 1500RPM | Lian Li PC-A10B | 5GHz Gulftown
ASUS North America Technical Marketing - If you are based outside North America and require technical assistance or have a query please contact ASUS Support for your region.
Rampage IV Extreme tweaking guide
ASUS Z77 UEFI Tuning Guide for overclocking
Maximus 5 Gene OC Guide
Maximus VI Series UEFI OC Guide
Hi Raja, Truly appreciate the reply.
Running at:
45x100 1.3125v
2666Mhz
Have boot dram voltage @ 1.45 and eventual @ 1.35
Cache @ 38 & ~1.22v
VCCSA @ 1.0 (have tried up to 1.15)
I've also disabled every fast boot option. No luck at all. This system is stable all day long besides a cold boot.
Getting the following post codes: 00 / 6F / 4F / 67
Gonna keep trying until I get it.
- i7 5820K | Asus X99 Deluxe | 16GB Corsair Vengeance LPX | eVGA GTX 970 SC SLI | Asus PB278Q | 250GB Samsung 840 | 11TB HDD Storage | Steel Series Rival & QcK+ | Razer Orbweaver & Black Widow Ultimate '14 | Corsair RM1000W | Win 8.1 -
- Ek Supremacy Nickel | Alphacool NexXxos UT60 360MM | Coolgate UHE 360MM | Bitspower Water Tank Z-Multi 150 | EK D5 CSQ Top | Alphacool VPP D5 | Corsair SP120 HP's | Corsair 900D | Xbox One & PS4 | Sharp Aquos Q 60" | Astro A50 -
~ Gone but never forgotten: Xtreme Legend - Hallowed Point - Enthusiast - Bencher - Friend ~
Bookmarks