ASUS X99 Motherboard Series - Official Support Thread

[Charles Wirth]

Thermaltake Ultimate 3.0 without fans - no air flow for hours -> days

I could run at stock forever without a fan. Getting Windows 10 setup, lots of broken.

[Dumo]

Test again with runmc's SS. Awesome load handling with -45C evap temp

[Raja@ASUS]

I haven't tried 10 yet Charles. You like?

[FlanK3r]

Im downloading it. I heard more positives reaction than negatives. Only HWBOT not allow Win10. The same donwclock issue as with Win8...

[Raja@ASUS]

Im downloading it. I heard more positives reaction than negatives. Only HWBOT not allow Win10. The same donwclock issue as with Win8...

Let me know how you like it. I like 8.1 for my home rigs so may jump over to this.

[Charles Wirth]

I will switch to 10 Preview for home, no more metro.

[allygash]

Hi Guys,

Quick question. Spec X99 deluxe/ i7 5930k with a swiftech h320 cooler with a bit of a difference..... I use three undervolted Sanyo Denki 120*38mm(love em) on the swiftech instead of the default ones. The motherboard headers or the mini fan extension, can they either take the amps the denkis draw? I currently have them connected to the fan controller on my NZXT phantom 820 which can take 30w per channel. I'd like to use the smart fan features of this mobo? Dont wanna fry those headers.

Cheers

[Chr0n1c]

Just ordered a new setup myself. 5820k / X99 Deluxe / Vengeance LPX 2666C15 will be under a custom loop so I am hoping for good results.

[Splave]

okay think I have a good understanding of the board now, and pesky ddr4 timings.



For me 3100 C11 is all over the place, sometimes 7m20.865-7m.20.562 1 time in 2 days.

3200 C12, can run back to back same time within .100 over and over again.

Normal wazza and method is working fine here.




Cold next weekend when 2nd Tsai Pot arrives.

[Raja@ASUS]

Hi Guys,

Quick question. Spec X99 deluxe/ i7 5930k with a swiftech h320 cooler with a bit of a difference..... I use three undervolted Sanyo Denki 120*38mm(love em) on the swiftech instead of the default ones. The motherboard headers or the mini fan extension, can they either take the amps the denkis draw? I currently have them connected to the fan controller on my NZXT phantom 820 which can take 30w per channel. I'd like to use the smart fan features of this mobo? Dont wanna fry those headers.

Cheers

Each header is rated at 1 amp max.

[Dumo]

The max for this chip

[msimax]

nice dumo

[FlanK3r]

Dumo: with which cooling method? Phase? If yes, seems very good, if LN2 - not much at CPU

[Dumo]

LN2 FlanK3r, unfortunately

[Splave]

on single stage, still getting spanked by fred haha

[Dumo]

3D fun ahead

TT water 3.00 hold the load fine

[l0ud_sil3nc3]

Red board bleeding efficiency



Have a higher one at 5140, but failed @ screening.

http://hwbot.org/submission/2645919_...20k_2097_marks

[hiwa]

Good efficiency LS, what memory and uncore settings?

[l0ud_sil3nc3]

Good efficiency LS, what memory and uncore settings?

3200 12-13-15-15 tight with 4.7 uncore

4.8 is doable but almost all chips I have tested stop at about 4.9 uncore.

[l0ud_sil3nc3]

So retested this 5960X one more time before it gets returned to confirm the turdiness.

5.2 R15



5.3G R15



5G XTU



5.2 XTU

[moorhen2]

Just had a nice surprise from my lovely Wife, a great birthday present I must say. Guess what I'm up to this weekend, lol.

[Chr0n1c]

Been playing around with my 5820K...and while not as awesome as you guys and your fancy 5960X's....lol

I think I've got a decent one. 4.5Ghz on Air @ 1.28v and 4.7Ghz at some voltage but BSODs on bench. Haven't touched other voltages and will have it under water next weekend.

[Dumo]

Tests 4X8




4X4

[Raja@ASUS]

Latest UEFI Build for R5E:
RAMPAGE V EXTREME UEFI 0801
0801 Download Mirror


Latest UEFI build 1002 for the X99-Deluxe:

X99-Deluxe 1002 UEFI
Mirror

[ToyTen]

Thank you Raja