Someone can helpme in buy an new DDR3 memories for my computer??

[psychopath]

hello

I need a new 8GB DDR3 memories for my computer


I have this kit in mind


GSKILL Ares F3-2133C9D-8GAB


http://www.gskill.com/en/product/f3-2133c9d-8gab


this have price 90 euros in my country.. and I not want spent more than 90 euros


with this gskill KIT...

can I have 2400mhz with timings 10 10 10 30 ? 1.65v ?

can I have 2133mhz with timings 9 9 9 27 ? 1.65v ?

can I have 2600mhz with timings 11 11 11 33 ? 1.65v ?

what max voltage can I use for 24/7 ?


with same level price.. have others best options? I need only 8GB

maybe this too: http://www.corsair.com/pt-pt/vengean...gx3m2a2400c11r

[NKrader]

no one can guarentee overclockability of the ram your gonna purchase, why not just pick up what speed you can afford.

g.skill is a good start they have been my go to brand as of late. just get the kit you listed and run it at 2133c9

[psychopath]

I bougth this kit today 85€

GSKILL Ares F3-2133C9D-8GAB
http://www.gskill.com/en/product/f3-2133c9d-8gab

And I try 2400mhz 10 12 10 28 2TB 1.65v and not work


Now I have a litle overclock.. 2200Mhz with original timings.. 9 11 10 28 1TB @ 1.60v full tested working nicely

I will leave kit working for 24/7 with 2200Mhz with original timings.. 9 11 10 28 1TB @ 1.60v sounds good for me


not a awsome kit but for me is enough and I m very happy


but why they call this CL9 if have only 1 timing with 9 ?

[Don_Dan]

hello

I need a new 8GB DDR3 memories for my computer


I have this kit in mind


GSKILL Ares F3-2133C9D-8GAB


http://www.gskill.com/en/product/f3-2133c9d-8gab


this have price 90 euros in my country.. and I not want spent more than 90 euros

The kit you've chosen is decent for everyday use.

with this gskill KIT...

can I have 2400mhz with timings 10 10 10 30 ? 1.65v ?

No.

can I have 2133mhz with timings 9 9 9 27 ? 1.65v ?

No.

can I have 2600mhz with timings 11 11 11 33 ? 1.65v ?

No.

what max voltage can I use for 24/7 ?

Well, if you don't want to hurt G.Skill's warranty, don't go over 1.65V. Slightly more doesn't hurt, though.

with same level price.. have others best options? I need only 8GB

maybe this too: http://www.corsair.com/pt-pt/vengean...gx3m2a2400c11r

The G.Skill TridentX F3-2400C10D-8GTX kit might have been another option, it only costs 75? in Germany.

I bougth this kit today 85?

GSKILL Ares F3-2133C9D-8GAB
http://www.gskill.com/en/product/f3-2133c9d-8gab

And I try 2400mhz 10 12 10 28 2TB 1.65v and not work


Now I have a litle overclock.. 2200Mhz with original timings.. 9 11 10 28 1TB @ 1.60v full tested working nicely

I will leave kit working for 24/7 with 2200Mhz with original timings.. 9 11 10 28 1TB @ 1.60v sounds good for me


not a awsome kit but for me is enough and I m very happy

Can you post the first digits of the serial number of your sticks, then I can probably tell you which chips are used on the kit and give better advice.
Take a look at my thread about G.Skill's serial numbers.

You could try 1200 MHz 10 12-12-31 @ 1.65V.

but why they call this CL9 if have only 1 timing with 9 ?

Today all high clocked kits have "uneven" timings, it's a technical necessity to reach high clocks.

[psychopath]

Don_Dan i think serial number is this.. 142815001866...

when I have time I will try timings 10 12 12 28 1TB @ 1.65v


but I think performance is the same as I have now at.. 2200mhz @ 9 11 10 28 1TB @ 1.60v



this is good or bad?



I have many programs open.. but.. only a fast test

[camouflage]

My vote is TridentX F3-2400C9D-8GTXD or F3-2600C10D-8GTXD - SAMSUNG double sided ICs. About 100? - 2600 is hard to get these days.

Here You can see bandwidth of F3-2400C9D-8GTXD clocked to DDR3-2600 10-12-11-30 @stock volts.........:



My board holds me back - I'm sure the sticks will do 2666 CL10 with a little bump of voltage.