Page 6 of 6 FirstFirst ... 3456
Results 126 to 136 of 136

Thread: 4790K & 4690K "Devil's Canyon" Overclocking Thread

  1. #126
    Xtreme Addict
    Join Date
    Jun 2006
    Location
    The O.C.
    Posts
    1,451
    @psychopath
    @nizzen
    Quote Originally Posted by Nizzen View Post
    This is Xtremesystems, not 24/7 lowclocksystems
    This is my addition to the 24/7 lowclocksystems
    i7-2600k L041C108 4.8ghz 1.32v PLL off Venomous-X Push/Pull http://www.xtremesystems.org/forums/...postcount=1063
    Asus P8P67 Vanilla
    Samsung 30nm MV-3V4G3D/US 2x4GB @ 9-10-10-28 1T DDR3 2133 1.6v http://www.techpowerup.com/forums/sh...d.php?t=159320
    Diamond HD 7970
    WD 600GB Velociraptor
    Corsair TX750W
    CM 690 II Advanced

    Q822A549 E8500 @ 4.5ghz air TRUE @ http://www.xtremesystems.org/forums/...d.php?t=203762

    G.Skill F3-12800CL6D-4GBXH @ 7-10-8-27 1T DDR3 2133 1.6v http://www.xtremesystems.org/forums/...d.php?t=266839

  2. #127
    Xtreme Addict
    Join Date
    Jun 2007
    Posts
    1,442
    for Aida64 stable

    screen grab

  3. #128
    Xtreme Addict
    Join Date
    Jun 2006
    Location
    The O.C.
    Posts
    1,451
    Quote Originally Posted by rge View Post
    for Aida64 stable

    screen grab
    Funny I thought I was stable with AIDA64 but just ran the x264 benchmark and crashed with a WHEA. Passed IBT also on max but failed x264.
    Need to adjust my fixed input voltage I think, up to 1.85v.

    X264 basically will tell u in 20 min (8 encoding runs) if you are stable enuf:
    http://www.techarp.com/showarticle.aspx?artno=520
    Last edited by LagunaX; 08-10-2014 at 09:18 PM.
    i7-2600k L041C108 4.8ghz 1.32v PLL off Venomous-X Push/Pull http://www.xtremesystems.org/forums/...postcount=1063
    Asus P8P67 Vanilla
    Samsung 30nm MV-3V4G3D/US 2x4GB @ 9-10-10-28 1T DDR3 2133 1.6v http://www.techpowerup.com/forums/sh...d.php?t=159320
    Diamond HD 7970
    WD 600GB Velociraptor
    Corsair TX750W
    CM 690 II Advanced

    Q822A549 E8500 @ 4.5ghz air TRUE @ http://www.xtremesystems.org/forums/...d.php?t=203762

    G.Skill F3-12800CL6D-4GBXH @ 7-10-8-27 1T DDR3 2133 1.6v http://www.xtremesystems.org/forums/...d.php?t=266839

  4. #129
    I am Xtreme FlanK3r's Avatar
    Join Date
    May 2008
    Location
    Czech republic
    Posts
    6,823
    yes, x264 5.x is very hard benchmark. Or you can try y-cruncher test, its crazy load :-D
    ROG Power PCs - Intel and AMD
    CPUs:i9-7900X, i9-9900K, i7-6950X, i7-5960X, i7-8086K, i7-8700K, 4x i7-7700K, i3-7350K, 2x i7-6700K, i5-6600K, R7-2700X, 4x R5 2600X, R5 2400G, R3 1200, R7-1800X, R7-1700X, 3x AMD FX-9590, 1x AMD FX-9370, 4x AMD FX-8350,1x AMD FX-8320,1x AMD FX-8300, 2x AMD FX-6300,2x AMD FX-4300, 3x AMD FX-8150, 2x AMD FX-8120 125 and 95W, AMD X2 555 BE, AMD x4 965 BE C2 and C3, AMD X4 970 BE, AMD x4 975 BE, AMD x4 980 BE, AMD X6 1090T BE, AMD X6 1100T BE, A10-7870K, Athlon 845, Athlon 860K,AMD A10-7850K, AMD A10-6800K, A8-6600K, 2x AMD A10-5800K, AMD A10-5600K, AMD A8-3850, AMD A8-3870K, 2x AMD A64 3000+, AMD 64+ X2 4600+ EE, Intel i7-980X, Intel i7-2600K, Intel i7-3770K,2x i7-4770K, Intel i7-3930KAMD Cinebench R10 challenge AMD Cinebench R15 thread Intel Cinebench R15 thread

  5. #130
    Registered User
    Join Date
    Aug 2014
    Location
    San Clemente, CA
    Posts
    1
    Hi Guys,

    I am new to this site and also new to overclocking in general. Picked up myself a 4790K last month for my first OC’d Gaming Rig.
    My chip’s sweet spot seems to be at 4.6GHz, 1.27vcore. Stable testing OCCT, IBT, CB (10x in a row), 3DMARK and AIDA64. Temps rarely hit 80C on any of these. All stress tests pass except Prime95 blend; after a few hrs it freezes or BSOD. No increase in vcore seems to stabilize after a few hrs running P95 (still haven’t figured out why).

    Now, here is my problem. It may sound strange, but it is something I deal with on a daily basis and it is very influential on my personal stress levels and overall happiness.
    My feelings towards the numbers 45 and 46 are similar to the symptoms of Tetraphobia. In short, I will avoid them at all costs because they make me feel extremely uneasy. The numbers 5 and 6 just do not sit well with me. The numbers 2, 4, 7 and 9 happen to be numbers I am most comfortable with. Every day I make decisions based on these numerical biases. Whether it is what volume I set my radio to or what cooking time I put on the microwave, the numbers 5 and 6 are always avoided, ESPECIALLY if they are the last numeral in a set.

    I was planning on getting a 4770K, but when the 4790K was released, it almost seemed like I was destined to own one. So you can imagine my discontent when I was only able to achieve a 4.6GHz clock. I cannot accept 4.6GHz as my speed, it’s irrational, yes, but I just can’t get over it.
    A 4.7GHz clock on my 4790K is WAY more important to me than a longer lifespan at 4.6GHz. If I can’t achieve a 4.7GHz clock, I will have no choice but to drop it down to 4.4GHz.

    I was hoping that one of the more experienced overclockers on here could find it in their heart to look over my settings and tell me if there is something I am doing wrong. I have spent many hours trying to get a completely stable 4.7GHZ with no luck. I don’t mind upping voltage, but I would rather have a veteran overclocker’s opinion on the matter before I go trying to up my vcore to 1.4 + and/or delidding.

    My current settings are:

    AI Overclock Tuner: XMP
    BCLK: 100
    CPU Core Ratio: 47
    All Cores Synced
    Max CPU Cache Ratio: 42
    Internal PLL Overvoltage: Enabled
    DRAM: DDR3-1600MHz
    CPU Core Voltage: 1.372v Manual (Will change to + Adaptive once stable)
    CPU Cache Voltage: 1.2v Manual (Will change to + Adaptive once stable)
    CPU Input Voltage: 1.9v
    DRAM Voltage: 1.5v
    SVID Support: Disabled
    CPU Spread Spectrum: Disabled
    CPU LLC: Lv 9 (out of 9)
    CPU Current Capability: 130%
    EVERYTHING ELSE SET TO AUTO

    At the settings listed, I can boot to windows just fine at 4.7GHz. I can run CB CPU once or twice with a score of around 920 and run OCCT for no more than 20 mins. IBT and Prime95 are a no-go due to temps > 90C.
    I feel like I’m almost there, but due to temps, vcore exceeding 1.377 is not really an option unless I delid (which I am trying to avoid).

    Any responses would be appreciated.

    Also, I have ordered a GB 770 Windforce that is arriving next week, so all OCing has been done w/o a discrete GPU. I’m really not sure if that would have any effect on my results or not.

    note: i have recently joined a few OC sites in an attempt to gain a better understanding of the process, if you see a similar thread created by me on another site, it is because i am trying to get as many takes on my situation as possible. I will read and, more than likely, reply to each response posted.
    i7 4790K
    Corsair H100i
    ASUS Z97-PRO (Wi-Fi ac)
    1x 8GB Curcial Ballistix 1600 CL8
    Samsung 840 EVO 250GB SSD
    Antec 850w
    Corsair 500R
    Windows 7 64bit

  6. #131
    Xtreme Member
    Join Date
    Oct 2004
    Posts
    156
    Quote Originally Posted by TerminusBlock View Post
    Hi Guys,

    I am new to this site and also new to overclocking in general. Picked up myself a 4790K last month for my first OC?d Gaming Rig.
    My chip?s sweet spot seems to be at 4.6GHz, 1.27vcore. Stable testing OCCT, IBT, CB (10x in a row), 3DMARK and AIDA64. Temps rarely hit 80C on any of these. All stress tests pass except Prime95 blend; after a few hrs it freezes or BSOD. No increase in vcore seems to stabilize after a few hrs running P95 (still haven?t figured out why).

    Now, here is my problem. It may sound strange, but it is something I deal with on a daily basis and it is very influential on my personal stress levels and overall happiness.
    My feelings towards the numbers 45 and 46 are similar to the symptoms of Tetraphobia. In short, I will avoid them at all costs because they make me feel extremely uneasy. The numbers 5 and 6 just do not sit well with me. The numbers 2, 4, 7 and 9 happen to be numbers I am most comfortable with. Every day I make decisions based on these numerical biases. Whether it is what volume I set my radio to or what cooking time I put on the microwave, the numbers 5 and 6 are always avoided, ESPECIALLY if they are the last numeral in a set.

    I was planning on getting a 4770K, but when the 4790K was released, it almost seemed like I was destined to own one. So you can imagine my discontent when I was only able to achieve a 4.6GHz clock. I cannot accept 4.6GHz as my speed, it?s irrational, yes, but I just can?t get over it.
    A 4.7GHz clock on my 4790K is WAY more important to me than a longer lifespan at 4.6GHz. If I can?t achieve a 4.7GHz clock, I will have no choice but to drop it down to 4.4GHz.

    I was hoping that one of the more experienced overclockers on here could find it in their heart to look over my settings and tell me if there is something I am doing wrong. I have spent many hours trying to get a completely stable 4.7GHZ with no luck. I don?t mind upping voltage, but I would rather have a veteran overclocker?s opinion on the matter before I go trying to up my vcore to 1.4 + and/or delidding.

    My current settings are:

    AI Overclock Tuner: XMP
    BCLK: 100
    CPU Core Ratio: 47
    All Cores Synced
    Max CPU Cache Ratio: 42
    Internal PLL Overvoltage: Enabled
    DRAM: DDR3-1600MHz
    CPU Core Voltage: 1.372v Manual (Will change to + Adaptive once stable)
    CPU Cache Voltage: 1.2v Manual (Will change to + Adaptive once stable)
    CPU Input Voltage: 1.9v
    DRAM Voltage: 1.5v
    SVID Support: Disabled
    CPU Spread Spectrum: Disabled
    CPU LLC: Lv 9 (out of 9)
    CPU Current Capability: 130%
    EVERYTHING ELSE SET TO AUTO

    At the settings listed, I can boot to windows just fine at 4.7GHz. I can run CB CPU once or twice with a score of around 920 and run OCCT for no more than 20 mins. IBT and Prime95 are a no-go due to temps > 90C.
    I feel like I?m almost there, but due to temps, vcore exceeding 1.377 is not really an option unless I delid (which I am trying to avoid).

    Any responses would be appreciated.

    Also, I have ordered a GB 770 Windforce that is arriving next week, so all OCing has been done w/o a discrete GPU. I?m really not sure if that would have any effect on my results or not.

    note: i have recently joined a few OC sites in an attempt to gain a better understanding of the process, if you see a similar thread created by me on another site, it is because i am trying to get as many takes on my situation as possible. I will read and, more than likely, reply to each response posted.
    Try the following:

    AI Overclock Tuner: Auto
    CPU Core Ratio: 47
    All Cores Synced
    Max CPU Cache Ratio: Auto (for now)
    Internal PLL Overvoltage: Auto
    DRAM Frequency: Auto
    CPU Core Voltage: Auto (check VID in CPU-Z and report back)
    CPU Cache Voltage: Auto
    CPU System Agent Voltage Offset: +.375
    CPU Analog I/O Voltage Offset: +.200
    CPU Digital I/O Voltage Offset: +.200
    Initial CPU Input Voltage: Auto
    Eventual CPU Input Voltage: Auto
    DRAM Voltage: Auto
    SVID Support: Auto
    CPU Spread Spectrum: Disabled
    CPU LLC: Level 9
    CPU VRM Switching Frequency: Extreme
    VRM Spread Spectrum: Disabled
    Active Frequency Mode: Disabled
    CPU Power Phase Control: Extreme
    CPU Power Duty Control: Extreme
    CPU Load-Line Calibration: 140%
    Termination Anti-Aliasing: Enabled
    EVERYTHING ELSE SET TO AUTO
    Last edited by csimon; 08-20-2014 at 12:47 PM.
    M7H (1002) | i7-4790K @ 4.8ghz @ 1.366v | cache @ 4.6ghz @ 1.309v |16gb (2x8) Xtreem @ DDR3-2666 (11-13-13-35-1T) | GTX 770 | AX860 PSU

    CVF-Z (2002) | FX-8350 @ 4.6ghz @ 1.4875v | cpu/nb @ 2600 @ 1.275v | ht @ 2600 | 8gb (2x4) Redlines (996997) @ DDR3-2133 (9-11-10-28-1T) | GTX570 | 850Z PSU

  7. #132
    Registered User
    Join Date
    Oct 2006
    Location
    Portugal
    Posts
    54
    what is maximum safe voltage to use 24/7 in option "CPU CASH VOLTAGE"

    the cpu is an 4690K and I have cash voltage 1.20v with 45x
    Last edited by psychopath; 10-15-2014 at 10:11 AM.
    MY SYSTEM: BENQ 27" LED XL2720Z | PHANTEKS ENTHOO PRIMO BLACK | EATON ELLIPSE ECO 800VA | ENERMAX PLATIMAX 750W | ASUS Z270 MAXIMUS IX HERO | INTEL i7 6700K | NOCTUA NH-D15S | CORSAIR VENGEANCE LPX DDR4 3200MHZ 16GB | MSI GTX980 GAMING 4GB | ASUS XONAR ESSENCE STX II | LOGITECH Z-5500 | SAMSUNG SSD 850 EVO 500GB | 2x WESTERN DIGITAL GREEN 4TB SATA III | ROCCAT RYOS MK PT | STEELSERIES RIVAL 300 | STEELSERIES 4HD | LOGITECH GAMEPAD F510

  8. #133
    Registered User
    Join Date
    Feb 2007
    Posts
    7
    4800mhz_1.30V/cpu + 4600mhz_1.31v/cache (1.95V vccin under load)

    Super stable, aida64 stability test 7hours.
    occt:cpu_large data set = 1hour stable
    occt:linpack = 1hour stable
    Cinebench loop,xtu bench, aida64 benches, pc and 3d marks..etc..
    All this with 70-85C max(delided cpu). No crashes/freezes whatsoever...

    Now, the problem is 4900Mhz. Cant get it stable even with 1.4V. Thats 0.1V increase but only 100mhz gain..
    Tried vccin 2.02 under load and didnt help.... Can run aida64 stability test for hours, can do XTU for hours too, can do cinebench loops, wprime 1024M etc... But in occt:cpu it crashes to bsod in 5 mins.

    Any ideas ?

  9. #134
    Xtreme Member
    Join Date
    Mar 2005
    Posts
    208
    clock for clock 3770k is what i have now, OC to 4.6 with corsair h110 is a 4790k worth it for me? or will performance differnce be very small?

  10. #135
    Xtreme Addict
    Join Date
    Feb 2007
    Location
    Italy
    Posts
    1,331
    Quote Originally Posted by leo5111 View Post
    or will performance differnce be very small?
    this.

    SB Rig:
    | CPU: 2600K (L040B313T) | Cooling: H100 with 2x AP29 | Motherboard: Asrock P67 Extreme4 Gen3
    | RAM: 8GB Corsair Vengeance 1866 | Video: MSI gtx570 TF III
    | SSD: Crucial M4 128GB fw009 | HDDs: 2x GP 2TB, 2x Samsung F4 2TB
    | Audio: Cantatis Overture & Denon D7000 headphones | Case: Lian-Li T60 bench table
    | PSU: Seasonic X650 | Display: Samsung 2693HM 25,5"
    | OS: Windows7 Ultimate x64 SP1

    +Fanless Music Rig: | E5200 @0.9V

    +General surfing PC on sale | E8400 @4Ghz

  11. #136
    Xtreme Member
    Join Date
    Oct 2002
    Location
    Front of computer
    Posts
    480
    Quote Originally Posted by leo5111 View Post
    clock for clock 3770k is what i have now, OC to 4.6 with corsair h110 is a 4790k worth it for me? or will performance differnce be very small?
    Same for me actually.
    I'm currently running a 3770 @ 5Ghz and won't likely benefit at all from upgrading at this time. And so I've conceded to the fact that I'd be better off waiting for these new chips to match or exceed my current clocks before making a move. Though 8 cores certainly sounds sweet.
    Last edited by Smalltimer; 11-08-2014 at 03:05 AM.
    Step aside, and you won't have to feel the awesome wrath of my mustache!

Page 6 of 6 FirstFirst ... 3456

Bookmarks

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •