Page 1 of 2 12 LastLast
Results 1 to 25 of 29

Thread: HWBot Team Cup 2014

  1. #1
    3D Team Captain Don_Dan's Avatar
    Join Date
    May 2007
    Location
    Munich, Germany
    Posts
    4,199

    HWBot Team Cup 2014

    HWBot has announced the third edition of the Team Cup, running from June 1st to September 30th. This year's competition consists of four sub-competitions with very specific hardware requirements. There is a stage for everyone!

    The competition details can be found below or at HWBot. Please let me know if you want to participate and which hardware you want to use. If you have any questions feel free to post in this thread!

    It has been a long wait for the Team Cup fanatics, but it's finally here! The HWBOT Team Cup 2014 continues the tradition of the Team Cup series featuring a challenging series of benchmarks to be run with a wide variety of hardware. Just like the previous years, the Team Cup is split up in separate competitions. This year we have four: a CPU challenge, a GPU challenge, a Memory challenge and a Miscellaneous challenge.

    Below you can find an overview of the benchmark and hardware limitations in the four sub competitions.

    The timeframe is the same for each of the sub-competitions. We start on June 1st 12PM GMT+0 and wrap things up on August 31st 12PM GMT+0. Over the course of the three months you can submit to any of the stages in the four sub-competitions and gather points for your team. On August 24 1PM GMT+0, seven days before the end of the competition, an elimination takes place and only the five best teams will be allowed to continue submitting until the very end.

    Will Madshrimps from Belgium dominate the Team Cup again, or is Overclock.net out for revenge? Amongst the favorites we must definitely include the HwBox team from Greece as they dominated all the warm-up rounds. Or maybe this year we?ll see an outsider capture the gold. Let?s wait and see!

    Good luck to everyone!
    SC1: CPU Challenge

    Stage #1 CPU-Z % OC Intel -> 307 % (Crabby: 100.00% / 2200 MHz -> 4400 MHz)
    Stage #2 CPU % OC AMD -> 293 % (Crabby: 64.50% / 2800MHz -> 4605 MHz)
    Stage #3 Single Core Cinebench R11.5 -> 1.8 points (Crabby: 1.23 points)
    Stage #4 AMD K6 3DMark2000 -> 1615 marks
    Stage #5 Yonah SuperPI 1M -> 15sec 609ms
    Stage #6 Via SuperPI 32M -> 1h 15min 13sec 837ms
    Stage #7 Athlon XP PiFast -> 42.74 sec
    Stage #8 Pentium II Cinebench 2003
    Stage #9 Raspberry PI HWBOT Prime -> 819.02 pps
    Stage #10 Q6600 Wprime 1024M -> 262sec 96ms (Crabby: 332sec 703ms)

    SC2: GPU Challenge

    Stage #1 GeForce3 3DMark2001 SE -> 16150 marks
    Stage #2 AMD S939 Single Core NV8000,9000 3DM01 -> 47320 marks (Crabby: 31394 marks)
    Stage #3 3DMark Fire Strike GTX 780 Ti -> 17357 marks (Crabby: 12118 marks)
    Stage #4 GT 610 Cloud Gate -> 5684 marks
    Stage #5 Kabini Catzilla 576P -> 1813 marks
    Stage #6 S3 3DMark03 -> 6044 marks
    Stage #7 2x Radeon R7 240 3DMark11 Performance -> 8977 marks
    Stage #8 Aquamark3 AGP -> 234190 marks
    Stage #9 Catzilla 720P GTX 580 -> 12947 marks (Crabby: 11788 marks)
    Stage #10 Heaven DX11 PCI -> 21.87 DX11 Marks

    SC3: MEM Challenge

    Stage #1 DDR3 Memory Frequency -> 2202 MHz
    Stage #2 DDR Memory Frequency -> 441.6 MHz (Don_Dan 365.5 MHz)
    Stage #3 Sandy Bridge Memory Frequency -> 1184.1 MHz
    Stage #4 S462 Memory Frequency -> 270.2 MHz
    Stage #5 32GB Memory Frequency -> 1317.4 MHz

    SC4: MISC Challenge

    Stage #1 Nvidia 780i,790i Reference Frequency -> 634.96 MHz
    Stage #2 AMD K8 Reference Frequency -> 588 MHz (Don_Dan: 445.01 MHz)
    Stage #3 Snapdragon 800 HWBOT Prime -> 3270 pps
    Stage #4 Tegra 4 HWBOT Prime -> 3476 pps
    Stage #5 Realbench V2 -> 111514 points (Crabby: 81126 points)

    You can find all the details at the competition page!
    Last edited by Don_Dan; 09-23-2014 at 06:55 AM.

    Quote Originally Posted by chew* View Post
    You can never have enough D9's.

  2. #2
    Xtreme Enthusiast
    Join Date
    Jan 2006
    Location
    Dayton, OH
    Posts
    582
    Considering the handful of platforms I have now, new and old, wiffed pretty hard on all of these

    I'll get to some scores up if I come across some of these. Good luck guys!
    Heatware
    filmbot

  3. #3
    3D Team Captain Don_Dan's Avatar
    Join Date
    May 2007
    Location
    Munich, Germany
    Posts
    4,199
    Guys, don't forget the competition wallpaper!

    Quote Originally Posted by filmbot View Post
    Considering the handful of platforms I have now, new and old, wiffed pretty hard on all of these

    I'll get to some scores up if I come across some of these. Good luck guys!
    You have a Yonah setup, right?

    Quote Originally Posted by chew* View Post
    You can never have enough D9's.

  4. #4
    Xtreme 3D Team
    Join Date
    Jan 2009
    Location
    Ohio
    Posts
    8,499
    I'm in for Socket 462 Memory Clock, Athlon XP PiFast and I suppose I can provide K8 Reference clock, though AM2 is not going to have much on S939. I might be able to work on single core CB 11.5 as well, depends if I can pick up an AM2+ board.
    Smile

  5. #5
    3D Team Captain Don_Dan's Avatar
    Join Date
    May 2007
    Location
    Munich, Germany
    Posts
    4,199
    Thank you, Sam!

    Quote Originally Posted by chew* View Post
    You can never have enough D9's.

  6. #6
    Xtreme Owner Charles Wirth's Avatar
    Join Date
    Jun 2002
    Location
    Las Vegas
    Posts
    11,653
    I don't have retail cpu's, Ill look more to see what old stuff I have
    Intel 9990XE @ 5.1Ghz
    ASUS Rampage VI Extreme Omega
    GTX 2080 ti Galax Hall of Fame
    64GB Galax Hall of Fame
    Intel Optane
    Platimax 1245W

    Intel 3175X
    Asus Dominus Extreme
    GRX 1080ti Galax Hall of Fame
    96GB Patriot Steel
    Intel Optane 900P RAID

  7. #7
    Xtreme 3D Team
    Join Date
    Jan 2013
    Location
    Dayton Ohio
    Posts
    176
    I can do the Q6600 Wprime 1024M and maybe the single core cb11.5 if I get a good single core. I've been wanting a Sempron for a while now. I will also do the 3DMark Fire Strike GTX 780 Ti but not sure what cpu I will use. There are a few others I can do if we need them.
    What I want to do but don't have hw for (yet) are the GeForce3 3DMark2001 SE, GT 610 Cloud Gate, 2x Radeon R7 240 3DMark11 Performance, Aquamark3 AGP, Catzilla 720P GTX 580 and the Heaven DX11 PCI stages.

  8. #8
    3D Team Captain Don_Dan's Avatar
    Join Date
    May 2007
    Location
    Munich, Germany
    Posts
    4,199
    Quote Originally Posted by FUGGER View Post
    I don't have retail cpu's, Ill look more to see what old stuff I have
    Thanks Charles!

    Quote Originally Posted by Crabby View Post
    I can do the Q6600 Wprime 1024M and maybe the single core cb11.5 if I get a good single core. I've been wanting a Sempron for a while now. I will also do the 3DMark Fire Strike GTX 780 Ti but not sure what cpu I will use. There are a few others I can do if we need them.
    What I want to do but don't have hw for (yet) are the GeForce3 3DMark2001 SE, GT 610 Cloud Gate, 2x Radeon R7 240 3DMark11 Performance, Aquamark3 AGP, Catzilla 720P GTX 580 and the Heaven DX11 PCI stages.
    Those are a lot of stages you plan to work on. Stages like GT 610 Cloud Gate, 2x Radeon R7 240, Heaven DX11 PCI and Catzilla 720P GTX 580 can all be done on the same setup as the 3DMark FS GTX 780 Ti stage, for the other two with older hardware you'd have to invest into an entirely new setup. Though I like that you're enthusiastic about this competition, I'm not sure if it's worth it to find the best old hardware for just two stages.

    Quote Originally Posted by chew* View Post
    You can never have enough D9's.

  9. #9
    Xtreme 3D Team
    Join Date
    Jan 2009
    Location
    Ohio
    Posts
    8,499
    I wouldn't be too opposed to picking up a GT 610 PCI for $49. Can Cloud Gate and DX11 PCI can be done both on that card?

    EDIT:
    Forgot I had two sticks of TCCD. 512MB sticks... I can't get DFI LP Ultra-B to POST async, only 1:1 up to 260 MHz.
    Last edited by BeepBeep2; 06-03-2014 at 02:26 AM.
    Smile

  10. #10
    3D Team Captain Don_Dan's Avatar
    Join Date
    May 2007
    Location
    Munich, Germany
    Posts
    4,199
    Quote Originally Posted by BeepBeep2 View Post
    I wouldn't be too opposed to picking up a GT 610 PCI for $49. Can Cloud Gate and DX11 PCI can be done both on that card?

    EDIT:
    Forgot I had two sticks of TCCD. 512MB sticks... I can't get DFI LP Ultra-B to POST async, only 1:1 up to 260 MHz.
    I think so, yeah...

    We'll figure it out!

    Quote Originally Posted by chew* View Post
    You can never have enough D9's.

  11. #11
    Xtreme 3D Team
    Join Date
    Jan 2013
    Location
    Dayton Ohio
    Posts
    176
    Quote Originally Posted by Don_Dan View Post




    Those are a lot of stages you plan to work on..
    HA! My first thought was "I'm doing all the stages" lol. I got my q6600 mounted and a fresh xp install on my ssd but I don't have time to really bench until the 23rd or 24th of this month. I'm going on vacation!

  12. #12
    3D Team Captain Don_Dan's Avatar
    Join Date
    May 2007
    Location
    Munich, Germany
    Posts
    4,199
    Quote Originally Posted by Crabby View Post
    HA! My first thought was "I'm doing all the stages" lol. I got my q6600 mounted and a fresh xp install on my ssd but I don't have time to really bench until the 23rd or 24th of this month. I'm going on vacation!
    Leave some stages for the rest of us!
    Remember to use XP SP3, or your WPrime score will suck.
    Have a nice trip!

    Quote Originally Posted by chew* View Post
    You can never have enough D9's.

  13. #13
    Xtreme 3D Team
    Join Date
    Jan 2013
    Location
    Dayton Ohio
    Posts
    176
    I was able to finally get some benching in. Had some issues with my SS at first but managed a descent time in the q6600 Wprime 1024M stage. I can get more out of it later.

  14. #14
    3D Team Captain Don_Dan's Avatar
    Join Date
    May 2007
    Location
    Munich, Germany
    Posts
    4,199
    Thank you for the first submission to the Team Cup!

    Quote Originally Posted by chew* View Post
    You can never have enough D9's.

  15. #15
    3D Team Captain Don_Dan's Avatar
    Join Date
    May 2007
    Location
    Munich, Germany
    Posts
    4,199
    This is a small news post to inform the Team Cup 2014 participants that we have extended the competition time by one month to accommodate those active in the many other competitions. The Team Cup requires the teams to compete on a wide range of hardware. Sourcing the components, figuring out its limitations and obtaining the best possible results takes up a lot of time. Given the incredible amount of ongoing competitions at the moment, we want to give those competing for the live competitions as well as other online competitions a bit of room to breathe.

    The idea was posted in the forum and it seems most agree with the time extension. We will update the competition pages and news articles to reflect the new competition deadlines. The elimination date is now September 23, 12PM GMT+0 and the competition ends on September 30, 12:00PM GMT+0. Good luck everyone and enjoy the extra time to win those awesome Cooler Master prizes!
    Important! One Month Time Extension for HWBOT Team Cup 2014

    Quote Originally Posted by chew* View Post
    You can never have enough D9's.

  16. #16
    Xtreme 3D Team
    Join Date
    Jan 2013
    Location
    Dayton Ohio
    Posts
    176
    I'm sure I already know the answer to this but I'm going to ask anyway. Can we use the i7-4790K? I only ask because I see a few folks using them and well I have one too.

    On a side note this years Team Cup has been extended so you lazy ones can be more lazy.

    edit: I just saw your post Don_Dan lol
    Last edited by Crabby; 07-21-2014 at 04:35 AM.

  17. #17
    3D Team Captain Don_Dan's Avatar
    Join Date
    May 2007
    Location
    Munich, Germany
    Posts
    4,199
    Actually, I don't know if it's okay to use the 4790K. I think it is, but I'll ask Pieter.

    Sorry for being lazy!

    Quote Originally Posted by chew* View Post
    You can never have enough D9's.

  18. #18
    3D Team Captain Don_Dan's Avatar
    Join Date
    May 2007
    Location
    Munich, Germany
    Posts
    4,199
    By the way:

    Quote Originally Posted by Massman
    A heads-up based on some emails I received. Even though the rules state that the hardware must be released before June 1 (the start of the competition), I think we can just allow the 4790K/4690K/G3258 no problem. They don't give a benefit in any of the stages since the overclocking capability is pretty much that of their counterparts.

    Any objections?

    Quote Originally Posted by chew* View Post
    You can never have enough D9's.

  19. #19
    3D Team Captain Don_Dan's Avatar
    Join Date
    May 2007
    Location
    Munich, Germany
    Posts
    4,199



    Quote Originally Posted by chew* View Post
    You can never have enough D9's.

  20. #20
    Xtreme 3D Team
    Join Date
    Jan 2013
    Location
    Dayton Ohio
    Posts
    176
    There are some easy points/places in the Memory Challenge stages to be had. All you have to do is run CPUZ. If anyone has a Sandy Bridge sys and don't mind posting some mem clocks you could easily get a good rank.

    Also if anyone out there has 32G memory could you please post something! Currently there are only 14 entries so that is at least 15 points added to our over all score! We are ranked 32 over all right now and every little bit counts so lets start benching!
    Last edited by Crabby; 09-15-2014 at 09:34 AM.

  21. #21
    3D Team Captain Don_Dan's Avatar
    Join Date
    May 2007
    Location
    Munich, Germany
    Posts
    4,199
    Quote Originally Posted by Crabby View Post
    There are some easy points/places in the Memory Challenge stages to be had. All you have to do is run CPUZ. If anyone has a Sandy Bridge sys and don't mind posting some mem clocks you could easily get a good rank.

    Also if anyone out there has 32G memory could you please post something! Currently there are only 14 entries so that is at least 15 points added to our over all score! We are ranked 32 over all right now and every little bit counts so lets start benching!
    George said he could do the SB stage, not sure if he has the time to do so though besides working, studying and testing DDR4.

    I've already asked someone to post a 32GB score, but if someone else could post a score it would be highly appreciated.

    Quote Originally Posted by chew* View Post
    You can never have enough D9's.

  22. #22
    Xtreme 3D Team
    Join Date
    Jan 2013
    Location
    Dayton Ohio
    Posts
    176
    I should of starting ing sooner than the last week of a 3 month long competition. I know anything is possible but I don't think we can take the over all victory. All I want now is to beat OCAlliance, lab501.ro and Australia OC.

  23. #23
    3D Team Captain Don_Dan's Avatar
    Join Date
    May 2007
    Location
    Munich, Germany
    Posts
    4,199
    Less than seven days until the elimination date!

    Quote Originally Posted by Crabby View Post
    I should of starting ing sooner than the last week of a 3 month long competition. I know anything is possible but I don't think we can take the over all victory. All I want now is to beat OCAlliance, lab501.ro and Australia OC.
    That's the problem if the competition runs for such a long time. There's always looooooots of time left...
    Overall victory was never possible!
    But there's this one stage that I'd like to do well in...

    Quote Originally Posted by chew* View Post
    You can never have enough D9's.

  24. #24
    3D Team Captain Don_Dan's Avatar
    Join Date
    May 2007
    Location
    Munich, Germany
    Posts
    4,199
    First boot.

    Let's see what I can do.

    AMD K8 Reference Frequency: 445.01 MHz

    DDR Memory Frequency: 365.5 MHz
    Last edited by Don_Dan; 09-22-2014 at 01:13 PM.

    Quote Originally Posted by chew* View Post
    You can never have enough D9's.

  25. #25
    3D Team Captain Don_Dan's Avatar
    Join Date
    May 2007
    Location
    Munich, Germany
    Posts
    4,199
    The Team Cup is over for us and we're ranked 25th right now, though it might change until September 30th.

    Thanks a lot to Crabby for submitting so many scores!

    Quote Originally Posted by chew* View Post
    You can never have enough D9's.

Page 1 of 2 12 LastLast

Bookmarks

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •