Quick Question on this board, I just need to add a third monitor to my set up just for desktop space. I am trying to enable the onboard video as well as the pci-e but I don't see a PEG option on this board? Is this possible to do?
Quick Question on this board, I just need to add a third monitor to my set up just for desktop space. I am trying to enable the onboard video as well as the pci-e but I don't see a PEG option on this board? Is this possible to do?
Current:
Asus P6T-Deluxe
Core i-7 920 (do) at 4.2Ghz
6 GB Kingston 2000
Fatality Titanium X-fi
Antec Quattro Pro 1000W
Diamond 5970
Asus 5870 (reference)
MM Duality-EK-Thermochill
Testing another new kit of memory's tonight,this kit is quite strong at 2800Mhz not quite as strong when pushing past 2800mhz,well it did boot to windows @ 2880Mhz 6-10-6-24 tight wasn't 32m stable
Is good for 32m 6-10-6-21 2800Mhz tight and also 1m stable at 2800mhz 5-10-5 2800Mhz tight
2.25v -160 PSC 2000 Pis cl6
Last edited by bullant; 09-13-2014 at 05:50 AM.
2800 CL5
very nice bullant
Thanks Loud,sergmann ,got a kit of 2300 pis that I've only used on air that are quite good will test them today on cold see how they go
Last edited by bullant; 09-13-2014 at 05:30 PM.
Nothing special with this bios, but here it is
https://dl.dropboxusercontent.com/u/...Z97OCF012c.rar
^ Thanks
Bullant how low temp did you have for 2800 cl5 on the dimms.
So decided to have play with 4ghz tonight,had couple faster runs but just fail at the end,will try again later push bit more
Question about SLI on this board. Can I run SLI with PCIE1 and PCIE4 and get 8x 8x?
I see in the manual it says PCIE1 and PCIE2 for 8x 8x, but just a setup question for when the board arrives.
Thanks.
Yes you can.
I rmad the board 2 weeks ago, so stupid to rma a board like this for pci-e speeds not working.
Took me a while, but yep, that was IMC related. Combining stability testing on a new chip with checking timings - tWRWR_dr 5 now running smooth.
So next thing, I was seeing weird default voltages with that Pentium. Default System Agent after CMOS Reset (no mem OC) is set to 1.000V, testing for stability with the usual +20mV was a total disaster.
Turns out I have to set an offset of -145mV on SA to be stable at 2666 memspeed (Timing Configurator also open on screenshot). Anyone ever had that happen?
Way better with XP, 1.95V. This was with the old chip, so still only using tWRWR_DR 8
Last edited by aerotracks; 09-27-2014 at 07:57 AM.
5ghz Run with xp
New bios here . It might help 3D performance and cpu score
Lots people ask about C-state . It is better to disabled it if you want better performance.
http://picx.xfastest.com/nickshih/asrock/Z97OCF112D.rar
[SIGPIC][/SIGPIC]
Nice 5ghz result sergmann
Testing kit of pis 2200 7-10-10,not to bad for low bin kit
this kit also 2800 6-10-6-21 tight,not stable at these clocks yet but ok considering HS are still on the memory's and only -135,should improve a little with more cold
Some Cl5 stability with these sticks,HS on -135
Last edited by bullant; 10-03-2014 at 06:31 AM.
Alright, I rmad my board due to that pci-e bug, it was successful and I got a brand-new motherboard. But now, while running it it still shows my older 7970 running at x8, same as before. Surely they have tested it for letting the motherboard to pass RMA, so what could it be. If it was the cpu in the first place then how did the board pass rma.
Last edited by Luumi; 10-03-2014 at 10:58 AM.
bull do you can put a larger pics
Bookmarks