Stock
Board
Stock
Board
Last edited by fng77; 05-05-2014 at 02:48 AM.
MotherBoard: GigaByte G33M DS2R
Memory: 2x1 Gb HyperX DDR2-9600, 1200 Mhz
Cpu: Intel e2160 @ 3,6 Ghz on Air
Vga: XFX 4870 XXX
Cooling: Ninja Mini, 2x Ximatek 120mm, 1x Zalman 80mm , Stock Gpu
Case: Antec Fusion Remote
Like the old days! Just play with fsb and volt!
Last edited by fng77; 05-03-2014 at 01:13 PM.
MotherBoard: GigaByte G33M DS2R
Memory: 2x1 Gb HyperX DDR2-9600, 1200 Mhz
Cpu: Intel e2160 @ 3,6 Ghz on Air
Vga: XFX 4870 XXX
Cooling: Ninja Mini, 2x Ximatek 120mm, 1x Zalman 80mm , Stock Gpu
Case: Antec Fusion Remote
120 FSB
Last edited by fng77; 05-03-2014 at 12:03 PM.
MotherBoard: GigaByte G33M DS2R
Memory: 2x1 Gb HyperX DDR2-9600, 1200 Mhz
Cpu: Intel e2160 @ 3,6 Ghz on Air
Vga: XFX 4870 XXX
Cooling: Ninja Mini, 2x Ximatek 120mm, 1x Zalman 80mm , Stock Gpu
Case: Antec Fusion Remote
Ran into a fsb wall at 124, had to raise volt and lower memory.
Last edited by fng77; 05-03-2014 at 12:42 PM.
MotherBoard: GigaByte G33M DS2R
Memory: 2x1 Gb HyperX DDR2-9600, 1200 Mhz
Cpu: Intel e2160 @ 3,6 Ghz on Air
Vga: XFX 4870 XXX
Cooling: Ninja Mini, 2x Ximatek 120mm, 1x Zalman 80mm , Stock Gpu
Case: Antec Fusion Remote
reserved 3
MotherBoard: GigaByte G33M DS2R
Memory: 2x1 Gb HyperX DDR2-9600, 1200 Mhz
Cpu: Intel e2160 @ 3,6 Ghz on Air
Vga: XFX 4870 XXX
Cooling: Ninja Mini, 2x Ximatek 120mm, 1x Zalman 80mm , Stock Gpu
Case: Antec Fusion Remote
reserved 4
MotherBoard: GigaByte G33M DS2R
Memory: 2x1 Gb HyperX DDR2-9600, 1200 Mhz
Cpu: Intel e2160 @ 3,6 Ghz on Air
Vga: XFX 4870 XXX
Cooling: Ninja Mini, 2x Ximatek 120mm, 1x Zalman 80mm , Stock Gpu
Case: Antec Fusion Remote
Nice. How far can you get?
I've read someone at AT forums mention something along the lines of 2.7 ghz with +0.2v, which took power consumption from around 20-25w to 65w... still negligible and these should be plenty fast at those clocks. Probably pushing it considering it's 28nm silicon at those volts... but what the hell! These are cheap!
2.5 ghz at 1.3v seems to be a nice middle spot.
Working on it... yes 0.2v is a lot for these. I just gave mine +0.01v to get past a fsb wall at 124 Mhz. gonna push it a little more now..
MotherBoard: GigaByte G33M DS2R
Memory: 2x1 Gb HyperX DDR2-9600, 1200 Mhz
Cpu: Intel e2160 @ 3,6 Ghz on Air
Vga: XFX 4870 XXX
Cooling: Ninja Mini, 2x Ximatek 120mm, 1x Zalman 80mm , Stock Gpu
Case: Antec Fusion Remote
Cant get past 125-130 gave it +0.05v no luck. Can boot at 2666 MHz but cant get into windows. Think I must tweak the northbridge a little to go any further. Guess its harder to OC these since they have the GPU in the same chip.
A 25% OC is all there is this evening. Will have a second look into it tomorrow!
MotherBoard: GigaByte G33M DS2R
Memory: 2x1 Gb HyperX DDR2-9600, 1200 Mhz
Cpu: Intel e2160 @ 3,6 Ghz on Air
Vga: XFX 4870 XXX
Cooling: Ninja Mini, 2x Ximatek 120mm, 1x Zalman 80mm , Stock Gpu
Case: Antec Fusion Remote
Intel 5960X@4.2Ghz[Prime stable]@4.5 [XTU stable] 1.24v NB@3.6ghz Asrock X99 Extreme 3 4x8GB Corsair Vengeance@3200 16-17-17
Sapphire nitro+ VEGA 56 Samsung SSD 850 256GB Crucial MX100 512GB HDD:WD10TB WD:8TB Seagate8TB
Thanks for the testing fng77!
I probably missed it somewhere, but what mobo are you using that lets you adjust the HTRef clock?
I recently built a NAS rig with an ASRock AM1 mobo, and although I didn't even try to OC it, I didn't see any kind of OC'ing features in the bios...
In fact I didn't even see any tweaks for the bus clock!
Dave
AMD FX-8350 (1237 PGN) | Asus Crosshair V Formula (bios 1703) | G.Skill 2133 CL9 @ 2230 9-11-10 | Sapphire HD 6870 | Samsung 830 128Gb SSD / 2 WD 1Tb Black SATA3 storage | Corsair TX750 PSU
Watercooled ST 120.3 & TC 120.1 / MCP35X XSPC Top / Apogee HD Block | WIN7 64 Bit HP | Corsair 800D Obsidian Case
First Computer: Commodore Vic 20 (circa 1981).
At 2.5 GHz, it's only 2 seconds slower in the 1M compared to my FX-6300 at 4.1GHz!
Fold for XS!
You know you want to
The only mobos so far that are known to allow OCing like this are the asus ones. The OP stated having one of these in another thread. Others (msi IIRC) can do a paltry 4-5 mhz OC on the bclk before getting unstable, similar to what happens on sandy/ivy/haswell
Damn. So these little cores aren't called jaguar for nothing
Last edited by Dr. Vodka; 05-03-2014 at 10:06 PM.
Last edited by fng77; 05-04-2014 at 03:38 AM.
MotherBoard: GigaByte G33M DS2R
Memory: 2x1 Gb HyperX DDR2-9600, 1200 Mhz
Cpu: Intel e2160 @ 3,6 Ghz on Air
Vga: XFX 4870 XXX
Cooling: Ninja Mini, 2x Ximatek 120mm, 1x Zalman 80mm , Stock Gpu
Case: Antec Fusion Remote
MotherBoard: GigaByte G33M DS2R
Memory: 2x1 Gb HyperX DDR2-9600, 1200 Mhz
Cpu: Intel e2160 @ 3,6 Ghz on Air
Vga: XFX 4870 XXX
Cooling: Ninja Mini, 2x Ximatek 120mm, 1x Zalman 80mm , Stock Gpu
Case: Antec Fusion Remote
I just love these Strecom chassis, so slim in everyway, not much space left but the thing is, the cpu is cold anyway, even under load.. But i guess I can get it colder for some more more OC testing.
Last edited by fng77; 06-12-2014 at 04:23 AM.
MotherBoard: GigaByte G33M DS2R
Memory: 2x1 Gb HyperX DDR2-9600, 1200 Mhz
Cpu: Intel e2160 @ 3,6 Ghz on Air
Vga: XFX 4870 XXX
Cooling: Ninja Mini, 2x Ximatek 120mm, 1x Zalman 80mm , Stock Gpu
Case: Antec Fusion Remote
I even had to swith the original fan to a smaller one.
MotherBoard: GigaByte G33M DS2R
Memory: 2x1 Gb HyperX DDR2-9600, 1200 Mhz
Cpu: Intel e2160 @ 3,6 Ghz on Air
Vga: XFX 4870 XXX
Cooling: Ninja Mini, 2x Ximatek 120mm, 1x Zalman 80mm , Stock Gpu
Case: Antec Fusion Remote
wow, nice, seems much fun for OC
ROG Power PCs - Intel and AMD
CPUs:i9-7900X, i9-9900K, i7-6950X, i7-5960X, i7-8086K, i7-8700K, 4x i7-7700K, i3-7350K, 2x i7-6700K, i5-6600K, R7-2700X, 4x R5 2600X, R5 2400G, R3 1200, R7-1800X, R7-1700X, 3x AMD FX-9590, 1x AMD FX-9370, 4x AMD FX-8350,1x AMD FX-8320,1x AMD FX-8300, 2x AMD FX-6300,2x AMD FX-4300, 3x AMD FX-8150, 2x AMD FX-8120 125 and 95W, AMD X2 555 BE, AMD x4 965 BE C2 and C3, AMD X4 970 BE, AMD x4 975 BE, AMD x4 980 BE, AMD X6 1090T BE, AMD X6 1100T BE, A10-7870K, Athlon 845, Athlon 860K,AMD A10-7850K, AMD A10-6800K, A8-6600K, 2x AMD A10-5800K, AMD A10-5600K, AMD A8-3850, AMD A8-3870K, 2x AMD A64 3000+, AMD 64+ X2 4600+ EE, Intel i7-980X, Intel i7-2600K, Intel i7-3770K,2x i7-4770K, Intel i7-3930KAMD Cinebench R10 challenge AMD Cinebench R15 thread Intel Cinebench R15 thread
MotherBoard: GigaByte G33M DS2R
Memory: 2x1 Gb HyperX DDR2-9600, 1200 Mhz
Cpu: Intel e2160 @ 3,6 Ghz on Air
Vga: XFX 4870 XXX
Cooling: Ninja Mini, 2x Ximatek 120mm, 1x Zalman 80mm , Stock Gpu
Case: Antec Fusion Remote
Ok Guys day two!
Couldnt get past the wall at 125! Tried to lower memory ratio no luck... Tried to lower multiplier no luck.. Jolted it with 0.05+ volt, 0.07+ no luck..
Got mad and wet to the wardrobe got a real fan and set that up. Cranked up the volt to 0.1+ Success! Got past the 125 wall, now I?m at 130, but with lower multi. Temps are not bad, around 37-40 idle.
MotherBoard: GigaByte G33M DS2R
Memory: 2x1 Gb HyperX DDR2-9600, 1200 Mhz
Cpu: Intel e2160 @ 3,6 Ghz on Air
Vga: XFX 4870 XXX
Cooling: Ninja Mini, 2x Ximatek 120mm, 1x Zalman 80mm , Stock Gpu
Case: Antec Fusion Remote
up at 133 now with a x19 multi
MotherBoard: GigaByte G33M DS2R
Memory: 2x1 Gb HyperX DDR2-9600, 1200 Mhz
Cpu: Intel e2160 @ 3,6 Ghz on Air
Vga: XFX 4870 XXX
Cooling: Ninja Mini, 2x Ximatek 120mm, 1x Zalman 80mm , Stock Gpu
Case: Antec Fusion Remote
Bookmarks